[^^Up^^] [Menu] [About The Guide]
 Number 193
 Already re-mirroring a drive...wait until the current re-mirror finishes.
 Attempt to configure a non-operating drive.  Repair drive or remove from
 Background re-mirror aborted due to drive shut down.
 Background re-mirror aborted due to ten write errors in a row.
 Batteries are low.  Server will go down in one minute.
 Beginning background copy of all allocated disk areas.
 Beginning background copy of only changed disk areas.
 Both mirror drives are invalid or marked saying that the other is out of
 Checking if the drive has been previously mirrored to the active drive.
 Commercial power has been restored to server.
 Drive being re-mirrored does not have any volumes on it.
 Drive not set up for Hot Fix.
 Drive was shut down due to an unrecoverable failure and cannot be re-mirrored
 Dup copies of redirection tables do not match...new tables will be built.
 Dynamic work memory not available.
 Error marking mirror bad...Run PREPARE.
 Error reading control tables from the active mirror drive.
 Error reading disk redirection information on sector 14.
 Error reading disk redirection tables...new tables will be built.
 Error reading mirror information on ALL drives.  Run PREPARE.
 Error reading sector 14 of the active mirror drive.
 Error reading sector 14 of the new mirror drive.
 Error reading sector 15 of the new mirror drive.
 Error reading the bad block table of the new mirror drive.
 Error writing control tables to new mirror drive.
 Error writing sector 14 to the active mirror drive.
 Error writing sector 14 to the new mirror drive.
 Invalid configuration in CONFIG.UPS.
 Invalid Mirror abend.
 Invalid physical drive specified.
 Invalid redirection table size...building new redirection tables.
 Invalid redirection tables...duplicate entry...new tables will be built.
 Invalid redirection tables...entry out of range...new tables will be built.
 Less than 10 free redirection blocks are available...new tables will be built
 Mirror drives are not the same size...Run PREPARE.
 Mirroring turned off on volume VOLUMENAME.
 Mirroring turned off on volume VOLUMENAME (drive nn failed).
 Only nn redirection blocks available on drive dd.
 Physical drive and its mirror do not exist or are totally shut down.
 Physical drive does not have a mirror.
 Physical drive is not shut off and/or is not mirrored.
 Problem with drive nn: Drive not set up for Hot Fix.
 Problem with drive nn: Duplicate copies of disk redirection data do not match
 Problem with drive nn: Error reading disk redirection data.
 Problem with drive nn: Error reading disk redirection information
 Problem with drive nn: Invalid disk redirection table...duplicate entry.
 Problem with drive nn: Invalid disk redirection table...entry out of range
 Problem with drive nn: Mirror drive was shut down.
 Ran out of redirection area on the new mirror drive.
 Re-Mirroring drive nn.
 Re-mirroring stopped.
 Re-mirroring successfully completed.
 Re-mirroring successfully completed...original drive shut off.
 The two drive sizes do not match...drive size on the new drive will be changed
 Too many bad blocks defined...redirection table overflow.
 UPS has been enabled.
 You are on auxiliary power. Server will go down in nn minutes.
 You cannot un-mirror a drive that is currently being used to re-mirror.

This page created by ng2html v1.05, the Norton guide to HTML conversion utility. Written by Dave Pearson