Error writing sector 14 to the active mirror drive.

        Occurs on:  SFT II and TTS.

        Meaning:  This error message indicates that the REMIRROR console
                  command was used to attempt to remirror a drive and
                  the server could not correctly update information in
                  sector 14 of the active mirror drive.  Although this
                  is not a fatal error, the REMIRROR command will be
                  aborted.

        Cause:  This could be caused by a failure in the active mirror
                drive, Disk Coprocessor Board (DCB), controller, or
                connecting cables.

        Solution:  Ensure that the active mirror drive, the DCB, and the
                   controller are properly seated, connected, and
                   powered on.  If nothing wrong can be detected, use
                   the PREPARE utility to re-setup the disk mirroring.
                   If this still does not fix the problem, exchange the
                   above mentioned components one by one with known good
                   components until the problem component is found.