[<<Previous Entry] [^^Up^^] [Next Entry>>] [Menu] [About The Guide]
Problem with drive nn: Error reading disk redirection information on
sector 14

        Occurs on:  SFT II and TTS.

        Meaning:  This error occurs on bootup and indicates that the
                  disk redirection information on sector 14 of physical
                  drive nn, the currently mounting drive, could not be
                  correctly read. Although this is not a fatal error,
                  the system will not be able to utilize this drive
                  until the problem is resolved.

        Cause:  This could be caused by a failure in the drive, Disk
                Coprocessor board (DCB), controller, or connecting
                cables.  It may also be caused by invalid information
                written on the disk.

        Solution:  Ensure that the drive, the DCB, and the controller
                   are properly seated, connected, and powered on.  If
                   nothing wrong can be detected, run PREPARE on the
                   drive and set up Hot Fix again. If this still does
                   not fix the problem, exchange the above mentioned
                   components one by one with known good components
                   until the problem component is found.

This page created by ng2html v1.05, the Norton guide to HTML conversion utility. Written by Dave Pearson