I am consulting for a firm that owns an IBM System/34.
It looks ancient and I can't find any documentation on
it, such as speed, capacity, data about the operating
system. The firm doesn't plan to upgrade right now and
I'm trying to figure out what the implications are of
the operating system hitting the millenium, not to mention
the old programs they have. Can anybody out there help?
Thanks!
Hi
I need the jumper setting for a DTK 486 dx33 Motherboard
Model # PKM 0037s. If anyone can help. DTK does not have
this model listed on their webpage. Thanks
Carolyn
I AM LOOKING FOR HELP WITH A HEADSTART, EXPLORER. I CANNOT GET THE BULLETIN BOARD TO WORK, ONLY WORKS IN DOS. I MAY NEED A NEW SET OF SYSTEM DISKS. THANKS IN ADVANCE.
If you are looking for hard drive info checkout http://www.blue-planet.com/tech/index.html
The page i linked from was http://www.repairfaq.org/~filipg this is another great page to check out
tons of good links!
DRAGON
Have obtained a DEC model LA50R printer and would like info on setting the disp switchs for baud rate/parity/etc. Also any info on the function of the other dipswitch set. Thanks... Mike
(please excuse the previous post... email address was wrong ( a slip of the finger)
Have obtained a DEC model LA50R printer and would like info on setting the disp switchs for baud rate/parity/etc. Also any info on the function of the other dipswitch set. Thanks... Mike
Hi,
Anyone have any Info on a Sharp PC-7000A.
Thanks...:)
I bought an Apple IIc computer at a flea market. I would like any information on how to use it. All I know how to do now is turn it on, so any information would be a big help, the more basic the better.
I bought an Apple IIc computer at a flea market. I would like any information on how to use it. All I know how to do now is turn it on, so any information would be a big help, the more basic the better.
Hello,
Need help with a Compaq slt/286..Anyone know how to get it to
send Picture to a External monitor instead of the one on the computer.
I have an old Packard Bell Computer that I am interested in selling. it is a pentium 133mhz with windows 95. I am having a new computer delivered to me next week. any buyers?
Can anyone suggest a hard drive make and model that would fit and work in a compaq lte lite 25c, larger than compaq's
maximum of 209 mb.
Is there a BBS where perhaps I could get some technical
advice on this?
If you can help I'd be grateful.
hasnip@yahoo.com
I'm looking for computer ad posters (XT or older to present,
any platform) to hang in my computer recycling shop. If
anyone has any or knows of a source, please send me an
email. Thanks.
I have recieved a computer that I am trying to figure out.
It has a bus similay to a VL bus except that the third part, (the loscal bus) is moved two inches away from the 16-bit AT bus, and it has about 16 extra connections. there two boards in it, both of which connect to this modified bus. one had a CPU marked I386 DX, and a similar but slightly smaller socket next to it that is empty, (co processor?) This same board also has 4 slots for memory. The other board connects to all three sections and has 8 memory slots.
the motherboard has no memory amd no cpu slot. there are 2 floppy controllers and one hdd controller on the MB. I got it with a tape drive and two floppy drives (one of each size).
Any ideas, suggestions please e-mail me.
Ok, i just got a Commodore C286-LT laptop computer. Very old, i know. Anyway, i was wondering if anyone knew of a web page I could visit that would give me the specs on it. Like the type of Power Supply it uses, as it didn't come with one. I'd appreciate any help u can give. Thanx.
Ok, I purchased an old laptop... it's a 486 with 4mb of RAM, and didn't come with a battery.. only the adaptor. I would like to purchase a battery and other parts (more RAM, modem, etc..) but the only info on this laptop I have is the word "Pioneer" written on top. There is no model number, manufacturer, or reg. number on the machine. It is not produced by Pioneer Electronics, as the logo beside the name is not their logo (an Ohm symbol), but instead a circle with a "heartbeat" symbol in it. Can anyone help me find documentation, parts, *anything* for this machine? It would be greatly appreciated.
Thanks,
Nissa
Hi,
I have a CompuAdd 486DLC computer with an unusual memory setup. 0 Bank of a 72 pin and 2 banks of 30 pin Simms sockets. Only trouble is I can't find memory to fit it. I have tried 3 different types of memory and none worked.
I put in 2 different manufacturers of 72 pin 4 X 36 72 pin Simms - neither worked. Then tried installing 4 4meg simms in the 30 pin. That did not work either. All were parity. Anyone who has an answer out there let me know. I would like to bring it up to at least 24. Right now I have a 8 meg Simm in the 72 pin and 4 1meg Simms in the 30 pin sockets so I now have 12. That is what it came with.
i have bought at an auction (2) dauphin 1050 386sx. the problem is they power up and both of them are telling me that they were manufactured for ____ business center.
invalid configureation info.
run set-up program
press F2 to run set-up utility
is there a floppy disc for this set-up? and if so does anyone know where i can get one. thank you. emory
Oops! Just wanted to apologize for a couple of punctuation errors. I missed them as I was editing inside the stamp-sized edit control. Next time, I'll paste from a real editor :-)
Claudio Puviani
cpuviani@icon.com
Reply to Jason re. 8088 vs V20:
Contrary to today's market, in which Intel clones are cheaper and slower alternatives, the NEC V20 was a FASTER alternative to the 8088. Replacing a V20 with an 8088 would be a downgrade, not an upgrade. To give you a scale, at the same clock speed, the V20 was as much faster than the 8088 as a Pentium is faster than a 486. In addition, the V20 had a special mode in which it could natively run 8080 code (and therefore CP/M).
You may wonder why, then, the V20 wasn't more ubiquitous, the answer is bad system software design. At the time, it was typical for BIOS code to time I/O operations based on the speed of CPU instructions. For example, some systems looped a fixed number of times between sending the disk controller a command and reading the status. With the V20, these loops would be significantly faster so that when the CPU read the status from the disk controller, the information was occasionally not ready and the system would crash. Evidently, those systems that shipped with V20s were designed to avoid these problems. It's to IBM's credit that the original PC/XT could handle a V20; many clones could not.
Claudio Puviani
cpuviani@icon.com
I have a 486 VLB motherboard that I need the jumper settings for to upgrade the CPU. I have put a DX33 in, but it still has a clock speed of 25MHz. The only ID is "OPTI-495SLC" followed by "3406 Rev 1.1" and of course "Made in Taiwan"
I recently got windows 3.1 working on my Toshiba T1600,
unfortunately, 1 meg(or 840k) isn't enough to run anything!
Does anyone have at least 1 meg or know were I could get some
at a good price?
I have a 286 Librex Laptop computer. I've forgotten the password.Any suggestions on changing the password or bypassing the password?
I have a Palm VL-BUS rev combination video & I/O card
The video chip is a Cirrus Logic CL-GD5426 and the IDE chip says APPIAN ADI2 Local Bus IDE. Does anyone have instruction manual for jumper settings for this card and Win95 drivers if possible as it wont work with default drivers or C/L drivers in Win95.
NEED HELP! I have a 2 IBM ValuPoint 486sx's. One will not recognize or run the floppy but will run its hard drive. The other will not recognize add-on cards such as a modem but the floppy and the HD run OK. There are no jumpers to change that I can find that would help. The system BIOS does not have any space for the add-ons either. Any help would be greatly appreciaated, especially for adding the modem.
Thanks,
David McElwrath
i would like to know if any body knew where I can get a cheap 1 gig hard drive for a:
Zenith Z-Note 320L it is a 386
I would also like to upgrade it to a 486 so if any one has that mother board please email me.
Thanks
just got offered a "minolta(?)" pc. Before I spend the time to go look at it, is there such a thing? If so, is it worth more than scrap prices?
I have just obtained a board purported to be a "Hydra" board. This board is supposed to be a Mac Emulator for the PC.
It is an 8-bit board, full length with a daughter card with RAM. It has a 9 pin connector on the back which looks as if it might be a Video Connector.
The boards markings claim it is from Verticom, Inc. A search on the web doesn't turn anything up.
If someone has the software and documentation, I'd like to make arrangements to get a copy from you.
If you have any information about this board, I'd be happy to hear it.
Thanks!!
Hi!
I have 2 Tandy 1400HD's, with blown power supplies. the one has an NEC V20 4/8 MHz processor with an 8087-2 coprocessor. The other has an actual Intel 8088 chip in it (4 or 8 MHz). I looked up the computer on Tandy's support line, and it says that they were shipped with the V20. I know that the processor was never replaced, because the case was never even oprened. When the power supply blew, I was given the computer. Does anyone know if it was an option to get the Intel 8088 in place of the NEC V20? Does anyone else have a 1400 with an actual Intel 8088 chip in it? Is this computer possibly worth more (I doubt it)?
Thanks in advance,
-Jason
hello
could someone lead me to some info on a hard drive i have
its a magnetic peripherals (a contol data company) mfm? rll?
hard drive. model # 94166-182
pn-77774320
sn-03089132
lot-0-8745
could i get the
cylinders
heads
precomp
landing zone
sectors
size
it says 160 mb in writing but i wnat to be sure. thank you in advance.
Could you help me to obtain german version of MSDOS 6.22?
I need only Io.sys and Msdos.sys i.e. image of bootable
diskette.
Danke schoen fuer Ihre Zeit.
Igor
I have Compaq Prolinea 386SX/25 (1993). Intitially
it was 4Mb PC but now 10Mb - I replaced a pair of 1Mb (30pins)
to 4Mb. The 0 bank don't let be replaced and I would like
to learn from somebody, why?
Another question - it is possible to replace 386SX in the same
"nest" with cyrix or alike processor?
Thank you for your time.
I have several items that I need to sell in a hurry. There is a Leading Edge Model DC-2011E, complete with monitor keyboard and power supply; 2 IBM PCjr's, one power source, both have color monitors and keyboards; an IBM PC/AT, includes a 5151 monitor, power supply, and keyboard; ARC Turbo PC Model 10, no monitor or keyboard; two modems with upgrades for one; 2 CD-Roms; a Gravis GamePad; Epson keyboard; another 5151 monitor; 2 other monitors; 4 or 5 different old video game consoles; a 286 motherboard; a whole box full of software, from 5.25" to 3.5" to CD's; and I think there are a couple of other things in there. I would like to sell it all for $650, but I can give prices if you want just certain things. Email me for more details, or visit my web site (click on my name).
Hi!
I have an IBM PS/2 L40sx laptop (386sx-20). It has an internal 2400bps modem. When I run the reference disk, it detetcs the modem on COM B, and tests it as O.K. No matter what I do. I can't get it to be recognised out of the diagnostics program. I DO have it turned on in the BIOS setup. I'm trying to use it with NetTamer, a DOS, Text-based browser. Do I need a special driver for it, or can someone tell me the initialization string (you can enter it in NetTamer).
ANY help is appreciated.
ThAnX,
-Jason
I have a a friend tha has a Hewlett-Packard Omnibook 600C laptop that has a broken LCD display.
I called HP directly to see how much it will cost to replace the display.
They gave me a rather high price.
Is there any company out there that can quote me a reasonable price to
replace the display? Even though I can bypass the display with a regular
monitor, my friend still would like to use the laptop.
I am looking for the Reference disk to get into the setup of an Epson Equity 486sx/25 plus
you can leave a message for me on my website http://www.sccsonline.com
or e-mail me at
sccs@sccsonline.com
or at jj_cummings@hotmail.com
thanx...
Message for Casper the "Friendly" Spammer:
You can find information about the Compaq SLT 286 at:
http://www.compaq.com/support/out_of_production/SLT286.html
This includes links to the setup utility and Y2K advisories. Hopefully, this information will at the very least cut down the volume of spam, if not its frequency.
Claudio Puviani
cpuviani@icon.com
Question for you Mac experts for a friend....I've never come across this myself.
Mac SE SuperDrive computer, just purchased, has a hardware password. Anyone know if there is a key combo, jumper, software fix or whatever to bypass this since contacting the last owner is not an option?
Hey guys here is some more junk that I have for trade for Compaq SLT286 stuff. Enjoy
The gateway has two processors: a 486 sx33 and a 486 sx25. Both are in working condition but I think there is something work with the power supply. I has no ram but I do have a 16 meg chip that I am willing to trade. Im am very sure that it can be fixed. Also has no mouse, keyboard, or monitor. The NEC is a 386 nonremovable processor. It works like a charm. I don't how much ram it has in it but it has alot of simms. I think they are either 256k chips or 1 meg chips. It has eight of them. I also have a bag of potporri memory chips that all work but I don't know there size. I think that it has a 120 meg harddrive in it. It has a 5.25 floppy and a 3.5 floppy in it. I think that is about it. Oh yeah, the gateway also has an internal 14.4 modem that works. If you have any more questions just ask.
Thanx
Casper
For Sale, I have 11 unused and unopened copies of DOS 3.30 that are for sale for $5 a piece + $5 for 4LBs s&h by Priority mail. Also for sale are 9 unopened unused copies of IBM PS/2 Model 25 Operation Manual and Starter Disk for $2 a piece and $3 s&h. No orders out of the US, please unless you can recieve files attached to email. I can email the disks but not the manuals. Also if anyone has anything regarding the Compaq SLT 286 in the way of manuals, memory, battery, expansion base, etc.... I am extremely interested in these items and can pay money for them. I am desperately searching for anything at all related to the Compaq SLT 286.
I Also have a number of atari item that are for sale or trade for a working Atari Portfolio, 64k mem card, and pc to mem card reader interface. I will also trade the atari stuff for a working Compaq SLT286 or several(2+) nonworking Compaq SLT286's. For a list of what atari stuff I have, email me and I will send as soon as possible.
Thanx in advance,
Casper
P.S. If this message is kinda wierd in format or order forgive me, i don't like rewriting stuff a million times over.
We have a lot of old CP/M based test systems around and
wonder if there's any Y2K workarounds for the 2nd Millenium?
I need some informations about the HD Conner CP30121E
I would like to have
Size:120mb ?
Cyls:
Heads:
Precomp:
Landzone:
Sectors:
I need those informations for a backup HD.
Thanks!
I am also looking for a Setup Disk for a Compaq 486/33m
and would appreciate any help I can receive on locating such sortware.. Is there a place to download this.... Again this is for a student project... Thanks in advance for any help given....
Does Anyone know where I can get a setup disk for an IBM PS/2 Model 60 . I know it is antiquated but, this is for a students project....any help would be greatly appreciated.
Just bought a 386sx computer! It is using the old Dip memory
i have memory on all banks (9x4=36) with 256k on each!
I'm just wondering why the 2nd and 3rd bank are disabled!
I think it's a jumper setting problem but I don't know which
jumper to change!
Can anyone help me?
Thanks in advance!
Hi!!
I have purchased an old notebook and I want to upgrade RAM,
but I don't know manufacturer of this notebook. All what I know, that is name of notebook "NYBBLE" and model NB 8800
This is 386SX33 notebook with 4 Mb of RAM. Can You help me
to find some information (manufacturer, documentation) about this notebook?
Thank You.
PS Sorry for my terrible English.
Help! I have an old Magnatronic 286 that seems to have lost its setup file for the mouse driver. I need to find a copy of Microsoft mouse ver. 7.04 to reload so It can be used again. E-mail if you have a copy on either 3.5 or 5.25 diskette. Thank you for your help
I need some infomation on how to get into the bios on my mums old
386/sx 2mg memory bios(ps1).
whats been tried:-
ctrl + esc
all 'f' keys holding shift, ctrl & alt both together and apart.
but still i'm having trouble trying to get into the bios...
I have an old US Logic A125 laptop 386SL25? Anyone got any info on this. How much memory can it take, whats to processor thingumy that fits into the case on the underside?
thanks
Stu
TO: Mike Gallant, alienc@fredericton.crosswinds.net
I think I have your everex board info. Your email address does'nt seem to be correct. If you could email me and let me know.
I recently purchased a Mac Plus and I was planning
to use a Sider 10 Meg hard drive with it, but for some reason
the mac won't recognize it (using Apple HD SC utility) and I
hooked it up to a Power mac and Anubis wouldn't recognize it either.
Is there somekind of driver i need or something? Thanks
I'M LOOKING FOR A DEC PART #M6008-AA D-BUS 16 CHANNEL 1SHOT, ALSO DOES ANY ONE KNOW WHAT THE DIFFERENCE IS BETWEEN A YE DATA YD-380 AND A YD -380B FLOPPY DRIVE?
Are 486 to Pentium upgrades worth the money and how do I know if it will work for my computer?
Does anyone know how to get into the setup of an old (8088) leading
edge computer. it has 2 5.25 " floppies and it dont read em.
also,
due to all the "hate mail" and "email bombs" i have been recieving
due to my message about new computer questions, i will only post a few messages per week now.
Need manual for VESA motherboard MD-4DUVC.
Other information maybe helpful - like the manufacture
Board uses UMC Chipset
I have a weird graphic card by Sanyo with an extra input or output on an RCA socket, it's marked as a SAT-220D, no FCC data and two numbers on the board, 4226974200 in white, embossed, and, T047928 C, printed. It also has an EPROM of some sort. any info would be greatly appreciated.
Opps! I found the motherboard to the IBM 5151 I stripped! Has five 8 bit slots, AMD 8088 4.77 Mhz CPU, 256KB of memory. I'll add it to the items I posted previously. Basically, pay for the postage and it's your!
Was going through my PC parts this evening, and found the items listed below I stripped from an IBM 5151 ( PC XT ) a few months back.
- Mitsubishi 5.25 inch 360KB disk drive
- "clone" 8 bit mono display adapter with parallel port
- 63.5 watt power supply
For $10.00 USD, they can be yours!
Does any know which barcode reader I may connect to my old Epson PX-16 laptop, or some information about pinning this connector "BCR". Also I'm interested any another information about this machine (docs, tech docs) Thanks!
Does any know which barcode reader I may connect to my old Epson PX-16 laptop, or some information about pinning this connector "BCR". Also I'm interested any another information about this machine (docs, tech docs) Thanks!
Need to know how (if possible) to load NT4 on Compaq Presario 4402.
They do not plan to support newer OS's on the Presario series.
Ergo, they don't care and won't help. But has anyone else tried it?
Thanks,
jim
Does any one know were I can get a Mac SE/30 with a harddrive
for a decent price. I don't mind how much ram it's got(as long as
it's got some)or how big the hard drive is.
Does anyone have or know where to get a manual for a Laser 486SX/3 Desktop. I have only the case and motherboard. The barcode reads "Laser Computer, inc. Model 44102AMS". I need to know what size chips to put in the cache ram sockets and how to set the jumpers. There are two unoccupied 28 pin sockets and a jumper with no silkscreen hints on the motherboard. Any helpful hints would be appreciated. (Thanks to everyone who responded to my Zenith Data Systems notebook call for help!)
I have the following processors for sale. If your interested in
any of them please email me at maverick@lynchburg.net.
1 486dx66 with heatsink and fan $12
1 486dx33 with heatsink $8
1 486 25 with bent pins $1
1 386 40 $7
2 386 33 $6 each
2 386 25 $5 each
1 387 coprocessor $3
Looking for working Widget Hard drive for Lisa- mine finally bit the dust. I have disk images (somewhere) for Lisa 7/7, Lisa Pascal workshop, and SCO Xenix for Lisa. Interested in other Lisa bits as well. Perhaps we can work something out .
Have an IBM PCJr Color Display in my way made especially for the PCJr and has the original rectangualr box plug on it rather than the defacto standard 9 or hd15 pin d-sub. Since I'm seeing a lot of PCJr's getting picked up, maybe someone might be interetsed in this? Theres' a few PCJr parts dealers still out there asking $189 for these "refurbished" (they turn them on and wipe them off). Is this stupid or what? I'd like to get my $35 back out of it or trade for other generic PC parts. Works great, looks good.
PS: NEC users that need setup or additional software can find it at NEC's site in Australia at ftp://ftp.nec.com.au/pub/
I have a NEC MultiSpeed HD 8086 laptop computer...
how do I get into the setup screen?? (is it on a disk?)
the harddrive has failed...
Am I out of luck on this one??
I am having trouble reading a 10 meg 8" Bernoulli cartridge in a 8" Bernoulli 10 meg drive. I keep getting a general fault error. Can anyone help ?
I am looking for a source to purchase one Panasonic HHC
RS-232C serial interface, model RL-P3001.
Does anyone know of a source for replacement hard drives for a Compaq LTE286? Is there any way of adapting a non-standard drive? What is the drive interface? IDE? RLL? MFM?
i need to come in to bios in a olivetti m6-460
is it anyone who can tell me how.
i have tried del, f1, f2, shift+alt+u and some more.
help.
FOR SALE:
-IBM XGA 14" color monitor - works great w/XGA/2 video adapter - make offer or will trade for older [working] laptop.
-Epson 14" color VGA monitor - Works great. good color and picture - make offer or will trade for older [working] laptop.
- Motherboards - TURBO XT 8088 - 640K RAM, 8 8-bit expansion slots will include hard drive/floppy controller - $10
AMI 286-12 - 2 meg RAM - dosen't want to do anything. RAM is in 4 30-pin SIMMS - $5
WANTED:
Information:
-Is there any such thing as an Amiga or Commodore laptop? If so does anyone have one that they want to sell (or trade for a monitor)?
-OLD Macintosh laptop- I don't care what size the HD or RAM is, as long as it works
- Cases for OLD laptops- The big kind that will fit computers like the Tandy 1400 and other BIG laptops
ThAnX,
-Jason
I have an AMBRA note book (model # SN8660). I am looking for a web site or another place to find the docking station and/or the external 3.5" floppy disk drive that works for this computer. It has a 15 pin eternal FDD port and its useless with out it. Thanks for any help.
I have a IBM PC jr with missing Dos application.
How do I go about this situation,Reprogram or can
I buy a replacement disk? Former Commodore user,I
do not know much about IBM applications.Commodore
has internal dos.Cannot get anythng loaded on IBM
PC jr ,Have disks,they will not Load,info says
must use Dos disk first. Did not come with. Can you help, thanks so much.
MSTARO
I know this may sound silly, but is there any way to put a 720 MB hard drive from a Toshiba 200CDS laptop into an IBM PS/2 L40sx Laptop? It currently has a 60 MB HD, doublespaced 3 times, and almost half of the sectors in it are bad, leaving about 35 total MB, before compression. If I can't put that drive in it, what's the biggest drive (I'd like over 100MB) that can be put in it, and where could I get one of these drives??
Any help is appreciated.
ThAnX,
-Jason
Hi My Name Is Jamie Dean
I am Wondering whether you may have any 'blueprints' relating
to the motherboard in my computer. It is a 486SX upgraded to DX
I wanted to find out about all of the jumpers in the computer
i have put a KINGSTON turbo chip inside the machine and it is surposed
to running the equvelent of a P75 but it loads very slow!
does graphics encredibly slow! and everything else slow!
the chip does not seem to have made a great deal of difference
Please If you have any info
You can E-Mail me at
m016ii00@mcmail.com
or
grand_dad_dean@hotmail.com
Thanks !!
for reading my message
I need jumper settings for acer vesa local bus, multi-I/O
interface card w/vga port. I have not been able to find it
anywhere.
I'm looking for spares for obsolete NEC 350-11 mainframe computer, model 1982 year.
Please, help in tracing down any web sites or e-mail adress where to inquire.
Many thanks
Adnan S.
I have an old motherbord -- an Everex EV-18123, it has alot of built-in stuff, including IDE, Floppy, 2 serial, 1 Parallel and a few others. I don't quit know if it has anything else because the board is not marked. It has 3 16-pin connectors that I don't know what they do. There is a chip on it marked AVGA, so I think one of them is a built-in VGA adapter. If anyone has any information on this board, please let me know.
I have old computer with I/O controler HDD card Vesa Local Bus. This card and motheboards made by UMC. I can find drivers for Windows 95. Where I find drivers for this card ?
siepak@friko.onet.pl
Surely someone must have one of these laying around!!!
I am looking for a used server case (you know the "double wide style") this for a hobby kind of project so I am looking for something reasonably cheap.
Any tips or information would be appreciated
Thanks for your help!
I have a IBM PC/JR , I need the pin out of vidio connector
I am using a monitor model 4863.
18pin rectangular
2 rows of 9 pins
metal shell
if ANYONE can send me some information or knows where i should try looking let me know thanks
Hi, I am trying to get my own message forum going.
It covers mainly IBM XTs & ATs. I would love it if some of
you guys could help me. If you are interested, just follow
the link to my page, and click on the forum tab on the main
screen. Thanks.
need info on a Wyse PC model WY2108
first of all need to know how to get into SETUP
any other info would be appreciated
I have a CompuAdd 325tx and just added a modem from another 325tx I bought for parts. All my software recognizes the modem, but none will initialize with it. I assigned the COM port properly in setup, but still can't get the modem to work. Port testing tels me the modem is there. Anybody have any suggestions?
Hi everybody!
Looking for "museum" bits:
Almost secured a Deal for a TS/1000
looking for a T/S 2048 - 2068
looking for a C64 preferrably with GEOS, INDUS GT Drive and Okimate color printer
TRS-80 III
also would love a couple videogame consoles:
Atari 2600
Pong
I travel frequently to the US (but only on 2 or 3 day trips, mostly to Detroit).
Can anyone help me?
i have a pc ibm ps/1 486 sx25, and whould like to know the
setting for the cpu 486 dx33.
Thank you for any reply.
Hi all..
i have a old NEC PC-8201a, and i like to try to programming it in machine language (or assembler).
Ok, i have all the original manuals, but these manuals explain only how to program in basic language.
I know how to programming with POKE and PEEK, but i don't have found a memory map, and program examples..
:(
Anyone can help me ? anyone have a machine language program sample ?
Thank's , and excuse me for my poor english
looking for battery for 486 Austin Laptop computer
have mac SE with all peripherals and software for sale, make offer
FOR SALE:
Hi, I have a Tandy SX1000. Looks and works like new. Comes with a external 1200bd modem and software. Make me an offer. Included shipping in your offer. Don't know how much it weights. Let me know.
Hey Everyone, would anyone be interested in the following:
JRAM Software v2.0-5.0 no docs
Compaq MS Dos v3.31 complete 5.25
Compaq Ms Dos V5.0 complete 3.50
ProComm comm. software 5.25
PSJET setup disk 5.25
ZEOS MS Dos v4.01 5.25
ZEOS MS Windows v3.0 5.25
ZEOS MS mouse drv. 5.25
ET-4000 VGA disk 5.25
PROVITEK MS windows v3.1 5.25
IBM MS DOS v3.3 startup 5.25
WYSE WY-445 enhanced display disk 5.25
WYSE 286/386 field diag. 5.25
WySE Wyse.sys 5.25
HP Vectra ES/QS/RS setup and utils 5.25
ONTRACK Disk manager v3.5 5.25
AST-386 diag program
IBM Advanced diag AT 5.25
Hi,
I'm looking for an original driver-disk for an old
EPSON LQ-850. I want to use it with Windows 1.01.
If you have the original disk(s) or a copy, please let me know.
Perhaps you can e-mail them as a zipped attachment.
Thanks a lot!
Thomas
Hello Everybody,
If you are having trouble finding those obsolete parts for
IBM, Compaq, and Hewlett Packard then I can help.
I have Parts, Complete Systems, Monitors, and Printers.
If I don't have it, I will try like Heck to get it for
you.
E-Mail me with what your looking for.
Thanks
Dewayne.
I have several OLD KAYPRO CP/M'S that I am trying to fix up but I am having trouble with the disk drives not working right.
Also I have an old Zenith Data Systems 286 Computer. I just reformated the hard disk and put DOS 6.22 on it but lost my old program for the use of the mouse. If any one has an old mouse program or can tell me how to get the Logitech 3.41 mouse program to stay installed please let me know.
Any information you can give me or help me find programs for the Zenith Data Systems 286 would help me tremedously.
E-mail me at claire_scleanair@hotmail.com
Looking for Tandy 1100 FD floppy drive. Please e-mail a
reply if you have any leads.
Thanks
Me again. I'm also looking for the AC adapter for the Contura's. I can run them from a bench supply at home, but it weighs a little too much to take with me. It's an 18-20VDC supply.
Thanks again.
Paul
I just acquired a couple of Compaq Contura 3/25 laptops. I'm interested in acquiring one of the 4mb ram modules for one of them, if someone has one lying around and they aren't too expensive (I'd hate to spend a lot of money on a 386......).
Let me know via e-mail if you have something. Kingston would be fine as well. Thanks.
Paul Braun
NerdWare
I have an OCTEK PVGA1D graphics card. I have downloaded the software drivers from OCTEK. They do not give any information on the QTY 6 DIP switches on the back of the card. Has anyone got the settings for these switches?
Someone game me a IBM 386 laptop to sell for $200.00. It has a black and white monitor, with 16 ram and I think a very small harddrive, because I locked it up putting win3.0 version on it. So, how do you unlock it? It will boot up to the dos shell and freeze. Isn't there a way to stop it from going to the dos shell during boot up by hitting f10 or something? Then couldn't I delete from there and make some room on the harddrive to correct this thing? Dos isn't my specialty, I like windows better, well I undersatnd win better. What do you suggest? Please help, I am desperiate. Also do you think $200 is an unreasonably price for the machine? It has a mouse and the battery that comes with it needs replacing, it will not hold a charge long. Know anybody who might like to buy it as is? Thanks, Dana.
I have an old modem with no visible FCC ID number. The only markings are the words "Bright Modem", A mfgr's symbol that looks like "ABA"and a serial # of the circuit board, 002-00025 Rev B+ copyright 1986. Any idea who made it? What the DIP switches might be for? Please email me with comments/info?
The 9332-200 mentioned below is a disk drive unit, part of an AS/400 racj mount mincomputer, and gets it's power from same...in case anyone wanted to know.
I have a JVC RLL Hard disk. It worked in an Epson portable (1989) whose motherboard is "dead".
How recovering the data wich are in the hard disk? (The disk is OK).
The disk is a 20MB JVC JD-3824LOYO. With a 26 pins connection (power supply included).
Thanks in advance!
I've just been given a HUGE IBM computer, model 9332 200.
I can't find any information on it at all except for a vague
reference to it that suggests that it might be a "minicomputer"
or mainframe computer. IBM technical support was less than
helpful, suggesting that I try their 1-900 number, which I
wasn't in the mood to try without knowing if they'll be any
help. I eventually found my way here while looking for sites
specialising in vintage, classic, antique, and obsolete
computers.
This machine seems to have been built before 1986, and weighs
a LOT more than I do. It didn't come with a monitor or a
keyboard for it's strange ports- I've never seen anything
like them and don't believe it will be easy to find hardware
that is compatible with this monster. I suspect that it
probably had one or more terminals of some sort that plugged
into it.
I've never plugged the machine in and turned it on, but it
seems to be in pretty good condition and I believe it will
work. I opened up the case, hoping to find a hard drive
which I could plug into my IBM PS/2 50 (and secretly hoping
that it may even contain several hard drives), and was shocked
to discover a hard drive that is bigger than the average
modern notebook computer inside. Now I REALLY want to get
this thing running just to see what in the world is in this
machine. Interestingly, several plug in cards seemed to
have been hand-built! The cardslots didn't look very familiar,
either, for that matter.
What I'm wanting to know is where I can find more information,
hopefully even an owner's or technical manual of some sort,
and some hardware/parts for it. I might consider selling
this thing if I like the price, but I'd really hate to part
with it... I must warn anyone interested that the shipping
and handling will almost certainly be a killer.
Any information, or any comments at all about this thing will
be greatly appreciated. Right now it's a complete mystery
to me!!!
Thankyou-
MH
Free to good home. IBM PC-DOS 6.1 with manual and box.
TrippLite UPS monitor software and cable for Netware
2.1-4.x never used. I'll even throw in a good 486SX/33
CPU. Please reply by email.
Hello. I would like to point out a resource that some people would benefit from, Usenet. There are several newsgroups available for dsicussion of old computers. Some examples are as follows:
comp.sys.apple2 (Apple II, II+, IIe, IIc, IIgs, IIc+)
comp.sys.cbm (Commodore 64, VIC-20, 128, PET, etc.)
comp.sys.atari.8bit (400,800,XL line,XE line)
comp.sys.ti (various Texas Instruments computers)
comp.sys.tandy (various Tandy computers)
bit.listserv.coco (Color Computer from Tandy/Radio Shack)
comp.sys.mac.* (with * meaning there are a bunch of them)
comp.sys.ibm.ps2.hardware (IBM PS/2)
comp.sys.ibm.pc.classic (mainly IBM PC, XT, AT)
These are not all the groups, only the ones I am familiar with. If you are using Outlook Express or www.dejanews.com, there is a search feature. I don't use Netscape, so I don't know anything about newsgroup readers that may have been included.
I hope this helps some people. Here are a few more sources of info for people.
www.ibm.com (if you search, it will come)
www.tandy.com (great place for Tandy's)
www.computercraft.com (DIP switch settings for PC and XT machines)
Thank you,
Jason Whorton
I'm looking for a working battery for a Toshiba T2000 Laptop. It's a 286 model with a 40MB hard drive. The battery I have is dead and won't carry a charge, although it works fine from an outlet. I have had a lot of trouble finding information on this battery -- any information will help.
Also, does anyone know what I can do to upgrade the RAM and possibly run Windows 3.1?
Thanks,
Trevor
I want to find and add a 1.44 disk drive to my Tandy 1000. I would appreciate knowing if this is possible and help in finding a drive. Thanks.
I HAVE JUST ACQUIRED ANOTHER COMPUTER. I WOULD APPRECIATE
ANY INFORMATION AT ALL.
MANUFACTURER: BALL CORP.
MODEL: HD 17
THANKS, RON
E-MAIL = floron@gte.net
With all the stuff going on here lately, though I would repost
Tom's message (found at the bottom of this page)
Time we all acted like adults.
Tom Carlson - Curator
Williamsburg, VA USA - Monday, June 01, 1998 at 12:42:49
A couple of groundrules and comments:
1) Try to keep it to older machines. There are tons of other resources on the net for current set-ups. This page
gets long enough just dealing with the old stuff.
2) Don't send profane flame e-mails to others. It's childish and only serves as a disincentive for others to post and
participate.
3) I do not want to act as an arbitrator between buyers and sellers. I don't mind if people sell the occasional
computer here, but I don't want to see buyers and sellers airing their differences on the Helpline. If you want to
regularly buy and sell, I would recommend www.ebay.com or another on-line auction. (This issue is 2 months old,
but better late than never.)
4) This version of the Helpline has been running for 10 months, with very, very little trouble from the users. My
sincere thanks to everyone who has made this a valuable resource!
Tom
I still have a bunch of old and obsolete computer equipment that I'm looking to seel in a whole package for $800. The pack includes an IBM AT, an ARC model 10, A Leading Edge (I'm not sure of the model), two PCjr's, a Toshiba T2000XE laptop (includes a printer), 5 or 6 different old video game consoles, several box sets (PC-DOS 2.1, PC-DOS 3.10, Basic 3.0, and a couple others), cartridges (PCjr and video games), 2 5151 IBM monitors (one is included with the AT), an AAMAZING monitor, a 286 motherboard (I'm not to sure of it's origins), a couple CD-ROM drives, a couple modems, a box full of software (from 5.25 to CDs), and a couple other oddball items. All of the computers (excluding the ARC) have monitors and keyboards. There is only one powersupply for the PCjr's. Please email for more info, or if you only want the prices for one item. Laters...
We currently own six C64 computers, seven 1541s, two C128s,
two Vic 20s, several monitors, Amigas, printers, etc. and
would like to know who to contact regading selling all our
C64 and Amiga equipment. We have tons of games and mag-
azines also. All are in great condition (some never used).
We would like to clear out our playroom so would prefer to
sell everything all at once and not one piece at a time.
Contact us for details.
Have 3 Xerox 820 computers, 2 working, but have a spare
mother board, 3 dual disk drives, 2 - 5.25" & 1 - 8".
A number of CPM programs, and literature for the above.
Also have a working Xerox 630 printer, and a questionable
620 printer, with daisy wheels, both plastic & metal. Any
one out there interested in purchasing this stuff ? Give me
a call, perhaps we can arrange something.
I just aquired a Toshiba T1100 Plus yesterday. I've managed
to get it working, or so it appears. I can't get any display
on the internal screen or an RGB or Composite monitor. Anyone
got any suggestions? Also what do the switches on the mother
board just in front of the left side of the keyboard do? At
the present they are all set to the off position. Thanks alot
for your help.
I am looking for the software that goes with an AST SixPakPlus
memory expansion board. Anybody here willing to e-mail me a
copy?
I have a 7 yr old 286 clone...I installed a 3.5" drive on it to share files w/ another computer. Drive worked ok for awhile...then started getting "unable to find sector" error....now I get "General Fault Reading Drive B" error...I checked all the connections, and even put in a brand new drive...get the general fault error on the new drive too. There are not any jumpers on the 3.5 drive...though there are on the 5 1/4 that cmae w/ the computer. I have changed the BIOS settings to show a 3.5" 1.44mb drive in the B slot. Anyone have any suggestions? Thanks..I appreciate any help!
For Sale, DOS 6w/DoubleSpace. $10 firm plus shipping. I also have 11 unused and unopened copies of DOS 3.30 that are for sale for $5 a piece + $5 for 4LBs s&h by Priority mail. Also for sale are 9 unopened unused copies of IBM PS/2 Model 25 Operation Manual and Starter Disk for $2 a piece and $3 s&h. Also if anyone has anything regarding the Compaq SLT 286 in the way of manuals, memory, battery, expansion base, etc.... I am extremely interested in these items and can pay money for them. I am desperately searching for anything at all related to the Compaq SLT 286.
I Also have a number of atari item that are for sale or trade for a working Atari Portfolio, 64k mem card, and pc to mem card reader interface. I will also trade the atari stuff for a working Compaq SLT286 or several(2+) nonworking Compaq SLT286's. For a list of what atari stuff I have, email me and I will send as soon as possible.
Thanx in advance,
Casper
P.S. If this message is kinda wierd in format or order forgive me, i don't like rewriting stuff a million times over.
Hey guys here is some more junk that I have for trade for Compaq SLT286 stuff. Enjoy
The gateway has two processors: a 486 sx33 and a 486 sx25. Both are in working condition but I think there is something work with the power supply. I has no ram but I do have a 16 meg chip that I am willing to trade. Im am very sure that it can be fixed. Also has no mouse, keyboard, or monitor. The NEC is a 386 nonremovable processor. It works like a charm. I don't how much ram it has in it but it has alot of simms. I think they are either 256k chips or 1 meg chips. It has eight of them. I also have a bag of potporri memory chips that all work but I don't know there size. I think that it has a 120 meg harddrive in it. It has a 5.25 floppy and a 3.5 floppy in it. I think that is about it. Oh yeah, the gateway also has an internal 14.4 modem that works. If you have any more questions just ask.
Thanx
Casper
ATTENTION!!! THIS IS DIRECTED TO EVERYONE
Alright, I tired of being harrassed by many people on this page. Ever since I started posting on this page, I have gotten no respect at all. If you are going to slam someone in the dirt, you can atleast have the courtesy to do it through email. As some of you know, I have helped many people on this page and yet I haven't sold anything or gotten anything that I have asked for. This would frustrate most people and cause them to stop posting, I know because I have seen it many many times. I keep going beacause people use the advice and help that I give them. And another thing, If you don't like what I have to say, then ignore it. That is something that is taught in kindergarden and by our parents all through school. And to some of you who don't know me whether it be by email or personally, you have no right to slam me. How do you know what I'm like. If everyone would just reply to those things that they are searching for, then none of this would ever happen. So please if you don't like what I have to say then, ignore me and forget about it.
Thank you
Casper
To my good friend SDM. I like the little slam of me that you posted here.
Im a 50 year old Viet Nam Combat Veteran (1967-1968). I have been stabed,shot,and blown up
defending this country.I have been kicked around by the best of them,ever since I got back
to the states (30 years worth).I am still proud of this country and all the MEN that
gave all to protect it,So if you want to slam me anymore you have my e-mail address,so please use that
instead of taking up needed space here.Give me your best shot I can take it CHUMP!
By the way I don't know casper personally,but ill defend anyones freedoms,even a butt head's like yours.
Thanks again for the slam!
DRAGON dragon@swva.net
I have a TRS80 Model 1 in very good condition and want to know how much it might be worth.
Ok, this is a repost since the original responder had to back out for whatever reason...
I have some excess Zenith Z248 equipment to get out of my way and would prefer a trade of other equipment for these..
I have two ZDS ZWS 248's, these are the planar units that the 286-12 processor board plugs into. Complete main units with the planar board, power supply, cpu board, I/O board HDD/floppy controller (MFM), MDA video card, drive bay inserts, etc. You need to add drives and it will take any drive from 360k to 1.44m. It takes all sorts of MFM hard drives as well and can probably accomodate an SCSI or ESDI in place of the MFM controller which will allow larger drive types. 512k on the cpu card. They have two open 5.25" bays, one has a filler that can be removed.
There's also another identical unit without a power supply. It's a case, planar board, drive bay inserts, 2 I/O boards. Mostly for parts or use to build up with parts you find elsewhere.
I need $25 plus shipping for ALL THREE (as a package) or will trade for something that I can use such as cdroms, hard drives, SIMMs, microchannel adapters,etc, etc, etc.... I would really like to get a couple 2X or higher SCSI cdrom drives, caddy type or tray load or larger SCSI hard drives whether full, half, 5.25 or 3.5"...
Drop me a line if interested. I also have two ZDS memory cards that work on these to bring the 512k up past 1024k that I would like $10 each or trade for. They are not open to sale/trade until the other units are gone and the new owner decides they don't want them.
I've installed a new IDE controller with 2 serial ports in my old GATEWAY 2000 computer.
(I've never had problems before with other board before )
The only difference between the new and previous controllers I've noticed is the different connector
numbering. Usually on the left of the serial connectore there are the digits 1 2. On the new board the numbers are 1 6.
I tried remapping the connections and changed the connection in my modem cable, but without success.
Any help will be greatly appreciated.
Thank you. Valento
I need a booklet titled "Laser Pal 286 Hardware Reference Manual" . I am adding memory to it but need to know how to set the dip switches .
Does anyone know how to make a wyse 50 or 350 terminal NEVER
lock? (The lock word in the upper left corner of the screen..
HELP!?!?
I just picked up an Acorn Electron and associated bits at a car boot sale,
tried it out, and it doesn't appear to work (nothing appears on the TV
screen. Does anybody know what's
supposed to happen when you turn one of these things on? Do they beep? Is
there a light anywhere? Is there any other way of telling whether this
thing has died or not?
Does anyone have the manual(s) for an AMD 486 DX4
Does anyone have the manual(s) for an AMD 486 DX4
Heres a novel idea...
I want your information!!!!!
Got specs, manuals, documentation on your hardware?
old stuff, new stuff, i dont care!
scan it in and send it to me!!!
your info could help others!!!!
I'm thinking of making a webpage
devoted to finding hardware specs.
or at least a clearing house of information.
and would appreciate the info.
send me your specs and a brief
description of the hardware
(model, manufacture)
Your reward?
My undying gratitude! :)
Ain't life grand!
Willie
(enduser@softdisk.com)
Does anyone have the manual(s) for an HP Laserjet IID
I'm building up a collection of old and unusual (or just unusual) CPU's. If anyone out there has any old CPU's (preferrably unususal) from dead mobo's that they wouldn't mind donating....drop me a line. I have been working at imaging all of the dies (after removing the covers, or otherwise opening the packages) and plan on setting up a page shortly for those interested.
Thanks!
I need service info on ATARI 130xe.
Any test or checks to get it to display on monitor.
thanks
wilf
Can anyone help me with any information on a Digital computer lab Model H-500? It is late 1960's vintage, in a shadow box-like wooden frame, and uses patchcords to connect various gates, etc., with an adjustable clock speed. I would like to find any literature for this, and if anyone has any estimate of its value. Would anyone out there have patch cords for it (I don't!). Thank you.
I'm trying to help a friend upgrade an old laptop he acquired at a garage sale. It is a NoteStar NP-913. Ya, I know, I've never heard of it either. But if anyone has, it's a 386sx with 1.6MB ram and 100mb HD. I'm trying to find out how to add memory, What type of chips it uses and how much can be added. So far I've actually managed to open it up and find the memory banks under the keyboard. But there are no markings visible on the single chips which plug in along one edge with wires. They look more like resistors except for the number of wires sticking out. Can anyone help?
Thanks,
TS
Anyone out there interested in scans of ads for computers from a 1984 Chicago newspaper? Found the stocks page in a stored box with all these neat ads, one showing the IBM PC w/64k ram at a LOW $2199! What a deal, I seel them under a $100 refurbished and complete....
If you might be interested in me attaching a scan of these to you I'll be doing them sometime this weekend, just drop me a note. I'll eventually have them on my website once I get done with the rework.
Hello again...
I was wondering if anyone had any of the following:
-Modem cable for TRS-80 Model 600 portable computer
-SIMMS for IBM PS/2 L40sx laptop
-Modem (internal) for Tandy 1400 laptop computer
-Modem (internal) for Tandy 3800 laptop computer
I was also wondering if there is any way that the 3800 could be upgraded to more than 4 MB of RAM, such as getting a BIOS upgrade, or something like that.
ThAnX,
-Jason
Anyone know of the key strokes to enable the BIOS screen on
a phoenix 8088? thanx in advance :)
*Lord Eros*
Hey guys here is some more junk that I have for trade for Compaq SLT286 stuff. Enjoy
The gateway has two processors: a 486 sx33 and a 486 sx25. Both are in working condition but I think there is something work with the power supply. I has no ram but I do have a 16 meg chip that I am willing to trade. Im am very sure that it can be fixed. Also has no mouse, keyboard, or monitor. The NEC is a 386 nonremovable processor. It works like a charm. I don't how much ram it has in it but it has alot of simms. I think they are either 256k chips or 1 meg chips. It has eight of them. I also have a bag of potporri memory chips that all work but I don't know there size. I think that it has a 120 meg harddrive in it. It has a 5.25 floppy and a 3.5 floppy in it. I think that is about it. Oh yeah, the gateway also has an internal 14.4 modem that works. If you have any more questions just ask.
Thanx
Casper
For Sale, DOS 6w/DoubleSpace. $10 firm plus shipping. I also have 11 unused and unopened copies of DOS 3.30 that are for sale for $5 a piece + $5 for 4LBs s&h by Priority mail. Also for sale are 9 unopened unused copies of IBM PS/2 Model 25 Operation Manual and Starter Disk for $2 a piece and $3 s&h. Also if anyone has anything regarding the Compaq SLT 286 in the way of manuals, memory, battery, expansion base, etc.... I am extremely interested in these items and can pay money for them. I am desperately searching for anything at all related to the Compaq SLT 286.
I Also have a number of atari item that are for sale or trade for a working Atari Portfolio, 64k mem card, and pc to mem card reader interface. I will also trade the atari stuff for a working Compaq SLT286 or several(2+) nonworking Compaq SLT286's. For a list of what atari stuff I have, email me and I will send as soon as possible.
Thanx in advance,
Casper
P.S. If this message is kinda wierd in format or order forgive me, i don't like rewriting stuff a million times over.
Thanks for sending the OEM and DeskMate software.
Still looking for battery and internal 1.44MB HDD for
TANDY 1500HD.
Any help/offers?
I have a SVGA video adapter (brand HMC made in China).
I installed Windows 95; installed de video adapter in many forms, but I didn't get more tha 16 colors!
I think I need the drivers but I don't know where to find them.
I?ll appreciate your help
I want to activate a the second ide port on my old 486 KENITEC DX2 50.
Who could give me the good jumpers on the mother board ?
I have what is a very interesting item, A Sun-1/100U (which has been upgraded to a Sun-2 with a 68010 board) With a 1/4 and 1/2" tape drives, 2X HDD
s loads of 1/2" inch tapes etc, as well as color frame buffer, 7MB ram etc. I also have it's SunOS 3.2 boot tape set.
The thing is the damn thing won't boot off the tapes, just comes up with "96A0 Error" and retenses the tape! The HDD is full of bad sectors , it started once and booted SunOS 3.2 but needs to be reformatted/replaced which means starting from the tapes, any ideas??
Karl
I am in need of an EISA configuration file for a Young Micro
Systems dual Pentium motherboard (!YMS0001.CFG). Any help
will be appreciated. Thanks!
I was also wondering how I could undelete files in Windows 3.1? I had netscape and at the time, it was unneeded, but I need it back! :( Anyway, how can I get it back???
thanks
I have a Magnavox HeadStart 500 and I was wondering what some of the original system specs were. I bought it from a friend who didn't know anything bout it, but it has win 3.1. I have a WebTV, but am in dire need of surfing with a computer. Is it possible and worth my while to upgrade this system or buy a new one for around $1000.
It's not too old because it has a 1X cd-rom, but I'm wanting to upgrade the processor to at least pentium, get a new cd-rom drive, and put in some new ram. Please let me know what your ideas are on this! Thanks.
I have recently bought a Commodore 386SX 25 in a slim line case.
The does not appear to be any obvious way to open the case to check it out inside.
Any suggestions?
Thanks in advance.
Just picked up a copy of "Guide to Personal Computing" published by Digital Equipment Corp. (DEC). Copyright date is 1982.
This appears to be a sales brochure for their early personal computers (i.e., "pc's", not "PC's"). It covers the Rainbow 100 8088/Z-80 hybrid, the DECmate II "secretarial" machine, and the Professional 325 and 350 (which used the PDP-11 'minicomputer" processor), along with some of the accessories (printers, etc.).
It's not a user manual, but it does have pretty decent product descriptions and some basic specifications. It's 180 pages long and is about 5.5" x 8.5", softcover.
I only paid a dollar for it, and I'll let it go for same, plus shipping, if there are any literature collectors or DEC fans that want it.
BTW - Tom, if you want this to go with the Rainbow 100 in the Museum, just ask. I'll even pay the shipping.
John Lowe
Please remove the .nospam from my address to respond.
I'm working on an older 486dx40 acer mother boad for a friend and do not have any ref info for the jumper setting for it. need help if possible thanks jim
Hello!
I was going through my stuff in my basement, and found a few things that I don't need:
-IBM PS/2 Model 30-286. 1MB RAM, 20 MB HDD, 1.44 MB floppy, on-board VGA. Has Hercules mono card w/ monitor. PS/2 mouse, Win 3.1, a few games. just add a keyboard.
-IBM Model 30-286. Motherboard, case, and floppy (1.44 meg) only. No RAM, HD, mouse, keyboard, or power supply. Board IS good.
-IBM 14" XGA monitor. Works great w/XGA/2 vid adapter (don't have adapter).
-Epson 14" VGA monitor. Works great. good color, good condition
If you are interested in any of these items, email me, and I'll give you the price of the item that you are interested in. I will trade the monitors or the working PS/2 for a working Tandy laptop (any model but 1400 or 600).
-Jason
looking to replace a deleted file
CHIPS.DLL
video support in a Zenith Data System
M/N ZIG-8675-QJ
any information will help
I have an old dataExpert motherboard named EXP8449. I need the correct manual for that board or at least the board layout along with the jumper settings. Much appreciation to anyone out there that can provide the information, Joe
HELP!! I have an old US Logic Subnotebook (don't laugh)Model #:TS37, CAT. No.: 82-10004
Does anyone know anything about it, ie.,where can I find parts to upgrade. I need a new power cord, memory upgrade...anything would help.
Thank you!!
I have a QMS 2001 "Knowledge System" this is a printer,fax, scanner all in one. The problem is that I do not have NT drivers for it. I was wondering if you knew of any.
Thanks in advance.
clive hasnip
england - Friday, July 24, 1998 at 02:55:37
I have a Compaq Lte Lite 25c with a non enhanced bios.
The manufacturers maximum hard drive for this model was
209 meg. I hear it can be difficult running certain drives on this model. Is it possible to install a 528 meg drive, and if so,
could you please state the make & model please. Is it also possible to perhaps install a hdd of say 2 - 3 times 528 meg, and if so how.
Thanks ; hasnip@email.infotrade.co.uk
Have a nice weekend
--------------------------------------------------------------------------------
I need to know how to reset the BIOS on a Kaypro 286!
HELP!! I am trying to get an external mouse (PS2 or serial) to work on a CompuAdd 325tx.
I have no manual. I am trying to help a local orphanage/forster home which had this machine donated to them.
Thanks.
I have a number of early PC's including Commodores, Singer (palmtop), etc. I am interested in selling to an interested collector, and need some basic pricing information. Any Help?
Does anyone no where I can get more information on Compudyne
Laptop computers? I have a one that I would like to upgrade
the modem.
free to good home:
IBM PS/2 Mod 90 XP 486 Quick Reference guide
STAR NX-1000 Multifont printer manual
good condition - only read by a little old lady on Sundays.
..p
pls advise your mailing address.
Hi, I am looking for an extenal floppy for a Gateway Handbook 486 and also parallel port adapter for same. Does anyone know where these can be sourced as Gateway won't help
Am in need of a Bernoulli drive capable of handling type 10 meg cartridges. Need any supporting cables/boards as well. Anyone with info on how one might be acquired please contact me. Thanks
I have a Zeos Freestyle 486SL-25 with 4MB ram. I would like to explore
the possibilities of upgrading the CPU, or replacing the motherboard to
a newer(and faster) type. We currently have DOS6 and WIN3.1.
All of our other computers are running WIN95. I really would like to make
this laptop compatible with my other units. Short of getting a new laptop,
what options do I have?? Who are the manufacturers out there that can upgrade
this tired puppy?
Hey suckers here is some more useless junk I have for trade'
2 gateway 486's both in working condition ( execpt for the power supply,ram,mouse,keyboard, and monitor) I have a 16meg (i think) chip to trade. ( Its been static fried and not even sure it fits these machines) I am sure they can be fixed. ( but for some reason I can't get them working)
The NEC has a lot of ram and a hard disk. I don't know the size of either but it works like a charm.( I am to stupid to run chkdsk or mem to find out the size)
Oh yeah I am still trying to sell my extreamly rare version of dos 6. It comes with an inaccurate history about it.
I just thought I would embarrass myself by consently running these ads to let everyone know I have no offers what so ever.
P.S. If this message is kind of wierd it's because I suffered a head injury when I was younger.
Thanx
In addition to trading computer items and cash for things I have and you need, I also am in need of generic bench test equipment such as signal generators, frequency counters, decade resistor boxes, capacitance testers, etc. I have three oscilloscopes (1 Tek 561A is for sale BTW) so I may consider trading for one but it depends on the type and it's usefulness. I'm getting swamped in machines, esoecially PS/2 models from 30's through 80's so make me an offer and I will very seriously consider them. External (parallel port) cdroms of any speed and external modems from 14.4k and up are a big item I always need.
Sorry to be such a hog in plugging this stuff but it isn't doing anyone any good stacked here when someone may be in need of a part of complete unit...
Have a Simply Lantastic 5.x Starter package that will connect two PC's from 8088 8 bit ISA up to the present Pentiums with ISA or EISA slots. Contains two 8/16 bit ethernet network adapters (NE2000 compat), cable, software in both formats for DOS and Windows 3.x and all the manuals in the original box. Used very little but works great. Wanna link the kid's machine to yours to share printer and files? This is ideal.
Make me an offer of "pooter" parts that I can use or a dollar amount and it's yours. I have to get some of this excess out of here. I can use all kinds of cards in ISA/VLB/EISA/MCA/PCI, especially ISA 1 or 2mb VGA video cards or a video capture setup. Just drop me a note and we'll see what can be worked out on it.
Also have collectable IBM 5150/5160/5170 machines, partials and complete units as well as tons of PS/2 items and machines. If you need something just drop me a note and I can tell you if I have it. I work trades, especially trades of these items for cash (that's a trade, come on!).
All kinds of PC stuff from 8088/8086 through 486 and some Pentium. If I don't have it I can probably point you toward a reliable source other than those online auctions.
Everyone go easy on Casper, he means well but doesn't always relay the message right in text format. We're all here to help each other, regardless of talent or experience.
I have a Compaq Lte Lite 25c with a non enhanced bios.
The manufacturers maximum hard drive for this model was
209 meg. I hear it can be difficult running certain drives on this model. Is it possible to install a 528 meg drive, and if so
could you state the make & model please. Is it also possible to perhaps install a hdd of say 2 - 3 times 528 meg, and if so how.
Thanks ; hasnip@email.infotrade.co.uk
Help with an IBM Displaywriter 6360
Problem; I had a company call me to repair one of these things and it was not terribly difficult to get
back up and running but they have a great deal of information stored on those big 8 inch
floppies and they would like to save this info to other media if they can. I did not want to
invest too much time in the project as they are a large company but are going bankrupt,
quite literally ie. they don't always get their bills paid. I was curious if anyone knew of a
relatively simple way of transferring the data off the big 8 inchers to some more modern
media in a usable format. Any help would be greatly appreciated.
Thanks,
Kirk
Hi,
I am looking for a used server case (you know the "double wide style") this for a hobby kind of project so I am looking for something reasonably cheap.
Thanks for your help.
Does anyone have schematic diagram for Atati Portfolio Flash Memory Card, Serial and / or Paraler interface.
I also looking for schematic of memory expansion for Kyocera F-1000 printer.
to Casper:
If you want to sell your stuff, go to www.classifieds2000.com. sell it there. as for dos 6, it's worth no more than the disks that it's on. I can get a copy - unopened - for about $15 bucks. it's not that rare. in fact, I have 2 copies. if you want to sell your stuff, just click on my name.
Hey guys here is some more junk that I have for trade for Compaq SLT286 stuff. Enjoy
The gateway has two processors: a 486 sx33 and a 486 sx25. Both are in working condition but I think there is something work with the power supply. I has no ram but I do have a 16 meg chip that I am willing to trade. Im am very sure that it can be fixed. Also has no mouse, keyboard, or monitor. The NEC is a 386 nonremovable processor. It works like a charm. I don't how much ram it has in it but it has alot of simms. I think they are either 256k chips or 1 meg chips. It has eight of them. I also have a bag of potporri memory chips that all work but I don't know there size. I think that it has a 120 meg harddrive in it. It has a 5.25 floppy and a 3.5 floppy in it. I think that is about it. Oh yeah, the gateway also has an internal 14.4 modem that works. If you have any more questions just ask.
Thanx
Casper
For Sale, DOS 6 It is not DOS 6.22 or 6.21 or even 6.2 It is however DOS 6 with Doublespace just plain 6 and yes I have checked the record books on this one, there were 1543 copies of the program installed onto the harddrives of computers that were bought. There were 500 copies of the program sold to comsumers in the boxes that were "on the shelf". So I am sorry for any inconvienience to anyone and yes this software semirare. And If you would like to purchase it from me it is for sale. Send me a price and we can talk. I also have 11 unused and unopened copies of DOS 3.30 that are for sale for $5 a piece + $3 s&h by Priority mail. Also for sale are 9 unopened unused copies of IBM PS/2 Model 25 Operation Manual and Starter Disk for $2 a piece and s&h depends on where u live.
Also if anyone has anything regarding the Compaq SLT 286 in the way of manuals, memory, battery, expansion base, etc.... I am extremely interested in these items and can pay money for them. I am desperately searching for anything at all related to the Compaq SLT 286.
I Also have a number of atari item that are for sale or trade for a working Atari Portfolio, 64k mem card, and pc to mem card reader interface. I will also trade the atari stuff for a working Compaq SLT286 or several(2+) nonworking Compaq SLT286's. For a list of what atari stuff I have, email me and I will send as soon as possible.
Thanx in advance,
Casper
P.S. If this message is kinda wierd in format or order forgive me, i don't like rewriting stuff a million times over.
OOPS! I'm sorry but I posted the wrong model number before. The correct information I am seeking is as follows...
Bought a used Zenith Supersport Portable PC, model # ZWL-184-02. Says
C:/FDO> on the screen when it's turned on. Can't get the darn thing to do
anything else. Can't get into the harddrive. Has Q&A, Lotus 123, and
Wordperfect. Not sure of the versions on any, but seems to be internet
capable. Any ideas?? Which manual do we need to order and how much is
it?? Any help would be appreciated. Also, can you tell me...is this a
286? Will it support any form of Windows? Can it be used to get on the
internet?
Thanks!
I have a Data general Avion530. does anyone know if I can run Linex on it? anyone know what it's processor is or?
its got 32 megs of memory and comes up in DGUX at present. They don't have floppies, rather some sort of tape drive.
Bought a used Zenith Supersport Portable PC, model # GWL-184-02. Says C:/FDO> on the screen when it's turned on. Can't get the darn thing to do anything else. Can't get into the harddrive. Has Q&A, Lotus 123, and Wordperfect. Not sure of the versions on any, but seems to be internet capable. Any ideas?? Or is there a downloadable instruction manual?? Any help would be appreciated.
Thanks!
neighbor got a Sharp 7000 portable computer, free, how does it work. two 5 1/4 floppy drives. It boots up, goes to a general info screen.
Does anyone know who has the best deal on a CPU upgrade (you know, to take a 486 up to a pentium). I am sure that there must be some "online" company that can beat the local computer superstore.
Thanks,
Dan
I acquired a Hewlet Packard Colorado 120MB Jumbo Tape Drive and I'm having some trouble getting it to work with HP's Windows 95 backup software. (I know Windows 95 isn't obsolete, but this drive is.) The tape drive works with HP's DOS software, but not with the Windows 95 one. The installation of the software installed al the drivers for the tape backup, but when I open the program it doesn't see that I have the drive. It lists my hard drive, and 3.5" and 5.25" disk drives only. Does anyone have any ideas?
Also I have a Gateway 4SX-33 (486SX-33) and I'm trying to get an Intel i486DX2-66 OverDrive chip to run in it. Gateway gave me the jumper settings they think are correct for that overdrive chip, but it didn't work. When I boot up with the overdrive in and the jumper settings that Gateway gave me, it tests the memory but doesn't send any info to the monitor. Any ideas?
Thanks,
Trevor Aaronson
taaronso@stpt.usf.edu
I have a few questions here.
I just ran "Nuts and Bolts" diagnostics
software on my IBM Thinkpad 360Cs
(486SX-33).
The System Diagnostic reported that the
CMOS checksum is "failed".
Does anyone know what this means?
Can this be the source of an access problem
I'm having with my PCMCIA modem card?
- - -
Also, whenever I exit Windows and run
some DOS programs, I get dashes ( - )
and lines ( _ ) running through some of
the type and software graphics.
I've read a solution for this a long time
ago - does anyone know how to correct
this?
Looking for a source for older compter IC's and components, as well as some newer.I search for chips
with certain date codes etc and would like to find more sources to purchse from.
Thanks
I might be able to get a Epson Equity I+ from someone who has no
use for it. I know it has a ST-506 drive in it and a 5.25"
floppy. I don't know if any of it works -- no video card
in it. Anyone know anything about these machines and if they
are somewhat standard to the IBM XT or if they have a alot
of specific parts that are hard to find. I might just take
the parts out to put a Hard Drive in my Olivetti Portable.
I have a Zenith Data Systems SuperSport 286 laptop, but I don't have the boot up disk. If someone has it, contact me. Also, I don't have any idea why it doesn't detect the hard drive. Underneath, it tells me that its type 44, but when I enter 44, it doesn't respond. It locks up with a blank screen. Is this because it needs an OS? If anyone has ZenithDOS, (any ver for a 286) then email me.
Thanks.
I lost my only copy of my reference disk to my ibm ps/2 70. I've been looking aruond the net for rf7080.zip.
I have an uncle with a Tandy 386-25 Mhz and an ACUMOSE Video
card (I THINK) and I am looking for the vesa command files
for them or better yet what does that equal in Win 95
Surprised it went on there (Win 95 I'm talking about.)
I need an AC/DC Power supply for a Bondwell laptop computer.
Part number is 462103200. (9V 1.5A) Where can I get one?
Thanks
Wanted:
TANDY 1800 and TANDY 2800 series laptops. I am willing to pay a fair price or trade.
ThAnX,
-Jason
The shareware version of PKZip comes with PKZipfix.
Get the official distribution package from www.pkware.com.
The only thing that's not in the shareware version is zip
authenticity verification.
Hi!
Does anyone have the full non-shareware version of PK-Zip (with PK-ZipFIX)?I have a few archives that WinZip won't read, and it tells me to run PK-ZipFIX, but I don't have it.
ANY help is appreciated.
ThAnX,
-Jason
older stuff - can this help you out?
price negotiable (ie, cleaning out the shop)
controllers for MFM drives:
Seagate 8 bit controller
WD 16 bit controller
AT 16 bit controller
AT 16 bit controller, with FDC.
MFM drive, full size (!) 5 1/4":
Tandon TM703AT (5 head, 733 cyl)
Kalok-320, 20 meg, mfm, 1/2 high
Intel Aboveboard populated 2.5 meg with 256k-150 DRAM
AT LIMM for 256k or 64k memory, has 2 banks of 256k-150
AT LIMM Fully populated 512k, with 64k chips, some are 200nS
(I have the switch settings for these)
4 x FDC for xt bus.
dual serial for xt bus, populated for 1 port. (needs another 8250)
2400b internal modem
16 color VGA card
system, 386-20, 1 meg, MFM FDC/HDC,140 mB HD, DOS6, 2 S&P blt in.
in desktop case with power supply.
as far as I know, this all works. I threw away the flaky
stuff.
also, Panasonic KX-P4410 laser printer with 2.5 meg memory.
removed from service - has a persistant jam indicator, probably
due to broken tray - paper tray needs replaced. Spare toner.
Sun 13W3 monitor cables
Sun workstation keyboards/optical mice from IPX series.
..pat
looking for LISA software, does anyone have any software to run on a Lisa?
Also:
Looking for an XLerator for the LISA
thanx!
-miro
I have a problem when I try to install a network adapter PNP Zoltrix in my Main Board EXP8449 Rev.1.0, the PC doesn┤t start. Can anybody help me?
Hi. I am looking for a boot disk for my Everex Tempo
386SX/16c, the hard drive of which has decided that
life is not worth living. Since my Mac is currently
my only connection to the outside world I would really
appreciate it in the form of a diskcopy image in my email,
but just sending me a zip archive of all the files would
work too. Thanks for any help.
LIFE LESSONS ABOUT MAINBOARDS AND MEMORY
Just a line to help others...
I thought I had two dead system boards...well
My 5x86 has been ressurected!!
and my 386 is back, alive and well!!
"How can this be",you ask?
Silly mistakes that any weekend pc-pro wannabe
(like myself) can miss
first, on my 5x86...
I decided to upgrade my ram to 64 kb 72 pin simms 60ns fpm
it worked fine with the 30 pin simms I had and had the slots
so i went for it...boom!!! dead board, (or so i thought)
I did every diagnostic i could and still had a dead board.
Everything eccept PUT BACK IN the old 30 pins and reboot.
which i finally did last night.Started right up.
Seems that my board
didn't like that newfangled memory.
As for my presumed dead 386...
Well, I tried this little trick too,
In this case thew board has to be
FULLY populated in at least one bank
before even getting a post.
Now i know what you hard core
fixeruppers are saying,
"Not this newbie stuff again"
but its a lesson that bears repeating,
Sometimes the most obvious problems can be
overlooked in a crisis. Now if only
I hadn't just spent 300 dollars on a
new mainboard/processor i'd feel better.
Sorry bout the length of this post.
need an external 3.5 in disk drive for sharp pc-6200 laptop
any ideas? thanks davin
I've got some old DEC gear that I want to give to a good home. It's 3 old RK05 drives. I believe (this is
from memory, they are in storage) it's 2 RK05s and 1 RK05F. Still in really good shape, I just don't have space
any more....
I'm also looking for a late-model Commodore PET. If anybody has any leads on
where I can find one, I'd REALLY appreciate it.
Does anybody have a compiler for GWBASIC?
I want to add this to my previous post:
If your interested in the modem, make me an offer because I don't know how it worth.
thanks
I am glad I am not the only one who feels this way about casper. Now his girlfriend may run to his defense, if she has the stones.
I on the other hand don't need preadolecent e-mails comming to me.
This is for Casper and his repetitive sales pitches for DOS 6:
CUT THE SPAM! We heard you the first time. This isn't a forum for your feeble attempts at starting a business.
For everyone else, don't let his little sob-story about limited print sway you into buying from him. DOS 6 isn't worth more than the floppies it's written on. Casper is just looking for a moron who'll buy his tale that this is a collector's item. Duh!
Claudio
Looking for info on the blank battery packs for a toshiba T3100sx. If anyone has the schematic for them please let me know. Thanks.
Hi,
I would like to download the complete version of DOS 5.0 so I can reinstall it on my old 486/33 PC. I have windows 3.1 setup disks but it needs to have DOS on it first. Unfortunately, something went wrong with the command interpreter, and it keeps looking for a bootable disk. Can someone please point me to a reliable source? Thanks for all the help in advance.
Arjun
ad9040@wayne.edu
I have recently aquired an "Em Pac" 486 and I'm trying to find a bit of information out so that I can perform some upgrades. it has a motherboard model "G486 SVL-3" (no brand name) and I was wondering if anyone knew the jumper settings for such a beast.
The computer also has a Cirrus Logic video card that I am looking to aquire win3.x drivers for. The numbering on the chip goes like this:
CL-GD5424-80QC-C
20447-276CM-P
9327 T
Korea B
Any help is appreciated! oh, and for the video card, yes, I tried the CL website at http://www.cirrus.com but it appeard to be down :)
Thanks,
Mike
Anybody looking for a good printer, I have three HP deskjet 540. E-MAIL me if interested.
I have an old Radio Shack acoustic modem (you know the modem that you put
your phone on it) for a TRS-80. I don't have the cable and the manual and, I don't have a TRS-80
so I don't know if it work. Anyone is interested in it ?
I also want to know if anyone know where I can get an old version of Novell Netware or Banyan Vines for Dos.
I have rescued an Atari Portfolio from the litter bin.
With it came a 128K RAM card and a "PC Card Reader"
with ISA card. Unfortunately, no manuals, no software.
From an extensive Internet search I learned that you need a
DOS driver "CD.SYS", and there should also be a formatter
tool.
Does any kind soul out there still have the driver disks
for that beast around and can zip/uuencode/mail it to me?
Thanks,
hauke
I have a BSR external CD-ROM made by Matsushita. It has a parallel interface that connects to a proprietary sound/interface card. I am trying to use it under Windows 3.1. I have gotten what I believe to be the driver for it, but I don't know the card settings (address, IRQ, anything else). Does anyone know of where I might find a list of the jumper settings?
Thanks
Looking for 1 or 2 Amptron DX-6900B (VLB 5x86-133 compatible) motherboards - in working order - anyone upgrading from these? Would love to have them with the 5x86-133 processors.
Have Gateway Communications ISA Net cards (1-8 bit, 12 or so 16-bit) Co-Ax & AUI, jumpered, NetWare compatible, FS reasonable (?offers?) if anyone is using them, NE1000/2000 clones IIRC.
I RECENTLY CAME INTO THE POSSESION OF A TOSHIBA T1000SE. WHERE CAN I PURCHASE A AC ADAPTER
FOR A RESONABLE PRICE? WHAT IS THE RUNDOWN OF THE LAPTOP EG: MEMORY HARD DRIVE SPACE MODEM SIZE ECT....
WHAT PROGRAMS CAN I RUN ON THIS MACHINE. MOST IMPORTANTLY WHAT IS IT GOING TO COST ME TO GET IT RUNNING IN
GOOD CONDITION?
JOSH JACKSON
I just re-read my post, and thought it may not be clear enough, so here is the clarifcation, I'm looking for the Joysticks for the systems spoken of below, sorry for any confusion.
I have several questions:
First-I have an IBM Personal System/2 Model 60. I put a Model 65 mother board in it, and the older floppy drive doesnt work. I am looking for a trade for a 65 floppy and faceplate, for the 60's floppy and face plate.
Second-I have an IBM PS/2 Model 55SX that locks up after it boots from the hard drive. If i boot it from a floppy, it works fine, but if i boot from the hard drive, it locks up. I was running DOS 6.0, i reformatted, and am using PCDOS 4.01.
Third-I have several SIMMS for older computers that take memory chips with metal pins on it. I think I have 4 megs. Make an offer if you are looking for this rare type of memory.
Thank You... =)
Looking for info on CANON 350 CD and bios support for > 1.2GB
Hey guys here is some more junk that I have for trade for Compaq SLT286 stuff. Enjoy
The gateway has two processors: a 486 sx33 and a 486 sx25. Both are in working condition but I think there is something work with the power supply. I has no ram but I do have a 16 meg chip that I am willing to trade. Im am very sure that it can be fixed. Also has no mouse, keyboard, or monitor. The NEC is a 386 nonremovable processor. It works like a charm. I don't how much ram it has in it but it has alot of simms. I think they are either 256k chips or 1 meg chips. It has eight of them. I also have a bag of potporri memory chips that all work but I don't know there size. I think that it has a 120 meg harddrive in it. It has a 5.25 floppy and a 3.5 floppy in it. I think that is about it. Oh yeah, the gateway also has an internal 14.4 modem that works. If you have any more questions just ask.
Thanx
Casper
For Sale, DOS 6 It is not DOS 6.22 or 6.21 or even 6.2 It is however DOS 6 with Doublespace just plain 6 and yes I have checked the record books on this one, there were 1543 copies of the program installed onto the harddrives of computers that were bought. There were 500 copies of the program sold to comsumers in the boxes that were "on the shelf". So I am sorry for any inconvienience to anyone and yes this software semirare. And If you would like to purchase it from me it is for sale. Send me a price and we can talk. I also have 11 unused and unopened copies of DOS 3.30 that are for sale for $5 a piece + $3 s&h by Priority mail. Also for sale are 9 unopened unused copies of IBM PS/2 Model 25 Operation Manual and Starter Disk for $2 a piece and s&h depends on where u live.
Also if anyone has anything regarding the Compaq SLT 286 in the way of manuals, memory, battery, expansion base, etc.... I am extremely interested in these items and can pay money for them. I am desperately searching for anything at all related to the Compaq SLT 286.
I Also have a number of atari item that are for sale or trade for a working Atari Portfolio, 64k mem card, and pc to mem card reader interface. I will also trade the atari stuff for a working Compaq SLT286 or several(2+) nonworking Compaq SLT286's. For a list of what atari stuff I have, email me and I will send as soon as possible.
Thanx in advance,
Casper
P.S. If this message is kinda wierd in format or order forgive me, i don't like rewriting stuff a million times over.
I'm looking for joysticks for a Tandy 1000 SX, and/or a TRS-80 Color Computer 2
I have this box of junk, it has an old 8088 motherboard and some cable and some 5 1/2 floppy drives and a few 10M hard rives. Is this stuff worth taking up space on my desk?
I am being offered both a Macintosh Plus and a 512K. Does anybody know where I can get a start-up disk to get them up and running? I will appreciate anyone's help.
I have this old 286 Gateway 2000. Are the parts worth anything?
I also have two monocrome monitors, same question, are they worth jack?
Howdy,
We have an old analyzer that has a Seagate ST225 harddrive in it.
The harddrive turned to toast. I found a ST251 but I found out
that there is no way to make changes to the bios for harddrive
parameters. So I'm looking for anyone that my have a ST225
harddrive that works. Thanks!
Bruce Eveland
College of Veterinary Medicine
Ames, IA
HELP! HELP! HELP!
Does anybody know about a Sharp MZ-700 emulator for the PC platform? I had it (and still have, in fact) and I'm very keen on running those old games/programs on this great (at that time) computer.
I will be pleased for any comments
HELP
I have a Zenith Super Sport Laptop (Model ZFL-184-01)
I need:
-a boot disk
If anyone has one, or where one could be downloaded off
the net Email me.
I just picked up a Radio Shack TRS-80 Model II Microcumputer,
along with the matching triple 8" Disk Drive, keyboard, and
modem. (don't know bps) Sadly for me, I have no software
to use with it, or any documentation whatsoever. Anyone know
where I could get software/docs, or maybe the going price for
one of these beasts? -jdteffer@wcf.net
SEE BELOW
that's 512k (a mac) Five Hundred Twelve K
I have a 51ke and a modem for it.
I need software to run a terminal...
I intend to use this as an e-mail machine, but I use Pine and Pine uses a control key. Which is absent from the 51k's keyboard.
Any suggestions?
david
I have a question for anyone with an answer. I have an old IDE (I assume) drive made by Western Digital. It is only 20 megs but it is enough to fit what I want to put on this old 286 I have. Unfortunately, it is referred to as a XTA interface drive. I assume this means `XT` and thus it will not work on a AT machine (286). Am I wrong in thinking this or is my only choice to try to find an 8-bit IDE controller and use one of my XT`s to run the drive.
I have a DEC PDP 11/23 + with a RXDX Disk Controller. I think
the RXDX Disk Controller is bad and I am looking for a
replacement.
Any Ideas or help?
i am looking for a copy of the old dos os to run on an old tandy 1400
laptop if you know of it or have it please send it to me thanks
I'm looking for a couple of older S-100 systems. Specifically a Northstar Horizon and Cromemco Z2.
Any help finding these would be appreciated.
Thanks
Tony
Does any one know where I might find info on a owners/users manual for a ZENITH MASTERSPORT 386SLe-80 ? Any help would be grealy thanked.
I have lots of older network adapters like Cabletron and 3Com etherlink 1, 2, 3.
If interested contact me.
Oh here is another ? for you. Do you have a Packerd Bell.......
Ha Ha Ha just Kidding.
too many computers. must say goodby to some old friends:
486-66 VESA motherboard, uses 72 pin simm. populated 16 meg.
with 2 cards:
VESA vga, and
VESA IDE HDC/FDC+2 serial+parallel+game
was running Windows-95. removed from service for upgrade.
$35. plus shipping.
I got an old printer. Given to me. But I have no drivers for it.
Do ya'll know were I can get "TandY DMP 130" drivers at. I look all
over the net and didn't find a thing.
more cleaning out the attic - need the space.
working system looking for more work:
Everex 386/33, 200 watt power supply, 4.5 meg memory, 64k cache; 1.2 + 1.44 floppy;
200 meg IDE, AMI bios, VGA-16, bus mouse; running Windows/Workgroups, DOS,
2 Serial & 2 Parallel. (com1& lpt1, com2& lpt2).
This has a big, substantial, heavy system case. Retired from service on a network.
$50 plus shipping.
looking for a good home for Pizza box machine:
286 NCR model 0019; ROM BIOS 4.6, 5/2/88, running DOS 6/WIN 3.,
286-10, no 287, LPT1, COM1, 1.44 floppy, 20 meg 3.5 " HD
double spaced, type 16, 611-4-17, no slots, not upgradable; EGA card
(can be set as cga, mda).
removed from service. $35. plus postage.
..pat
Hello,
We would like to know about ISA 486 motherboard, which contents chip of non-volatile SRAM
(no. 9235D3025791 or BS1225Y-200)
If you have any information about the SRAM from where we can buy the pls. let me know.
Awaiting for your reply.
Hitesh
Epson Equity LT-286 model no E062ou
has anyone got any idea of what memory is required
ie is it standard 30 pin simms
and any other info like where to get the memory and a new larger
hard disk
thanks john
I have a Compaq 486dx4-100 which was working fine until I
tried to get files off a os2/warp hard drive. I set up the
cmos to see the os2 hd as C: hoping to boot os2 and copy files
to the compaq hd then put the compaq hd back in the master
position my problem is, now that os2 is the primary boot disk
I can't get into compaqs cmos edit. I've tried every thing I
can think of. On my bsr the bios is what controls the cmos setup
and it hits the option before trying any of the drives. Is there
some similar trick to get into cmos setup on the compaq? I have
a "rescue disk" which is not much help. I can start windows but
that does not help get into the cmos setup. I would appreciate
any help you might have to offer. I bought this machine to give
to a young friend who does not have a decent computer and was
hoping to give it to him Thursday.
jcm
HI!
I'm looking for any TANDY laptops (except the 1400 and 600). I am ESPECIALLY looking for the TANDY 1800 and any of the TANDY 2800 series. I am also looking for the larger type carrying cases for older laptops.
I am willing to pay up to $40 for the laptops, or I have a couple of monitors (one VGA, one XGA) that I'd be willing to trade. Both work great.
Email me if you have any info.
ThAnX,
-Jason
I have a 386 at my office I just have 50 megs in HD and 2 megs in ram, and I need a data base manager, but I can't find such old software, I know dbaseIII plus, but any other is ok.
where can I download the dbase III plus? or anyother database software from the net that can use in my old PC?
Please Help.
I have a Zenith Super Sport Laptop
-Power supply is bad-
-need scematics/circut layouts-
-can anyone help-Do you have and old Zenith Laptop-
Willing to part with it.
Any help greatly appreciated
For Sale, DOS 6 It is not DOS 6.22 or 6.21 or even 6.2 It is however DOS 6 with Doublespace just plain 6 and yes I have checked the record books on this one, there were 1543 copies of the program installed onto the harddrives of computers that were bought. There were 500 copies of the program sold to comsumers in the boxes that were "on the shelf". So I am sorry for any inconvienience to anyone and yes this software semirare. And If you would like to purchase it from me it is for sale. Send me a price and we can talk. I also have 11 unused and unopened copies of DOS 3.30 that are for sale for $5 a piece + $3 s&h by Priority mail. Also for sale are 9 unopened unused copies of IBM PS/2 Model 25 Operation Manual and Starter Disk for $2 a piece and s&h depends on where u live.
Also if anyone has anything regarding the Compaq SLT 286 in the way of manuals, memory, battery, expansion base, etc.... I am extremely interested in these items and can pay money for them. I am desperately searching for anything at all related to the Compaq SLT 286.
I Also have a number of atari item that are for sale or trade for a working Atari Portfolio, 64k mem card, and pc to mem card reader interface. I will also trade the atari stuff for a working Compaq SLT286 or several(2+) nonworking Compaq SLT286's. For a list of what atari stuff I have, email me and I will send as soon as possible.
Thanx in advance,
Casper
P.S. If this message is kinda wierd in format or order forgive me, i don't like rewriting stuff a million times over.
HELP okidata 182 Dip Switch Settings. Thanks
Hi!
I'm looking for the following:
-Tandy 2800 series laptop computer (any model).
I am willing to trade an IBM XGA or an Epson VGA (both 14") for it. (If you have one, but don't want a monitor, let me know, anyway)
-I'm also looking for various old laptop cases (to fit larger laptops such as the Tandy 1400 and 600).
ThAnX,
-Jason
Hi
Has any one got a AC power unit or battery charger for a
compaq LTE 386s/20
Thanks
Martin Stevens
I have IBM, Compaq, and Hewlett Packard computers for sale. These items have Network adapters installed. I will also sell these as parts. I'm willing to sell these at very reasonable prices.
IBM: 5150, 5160, 5170, 5271, 5273, 8530, 8535, 8540, 8550, 8555, 8556, 8557, 8560 ,8570, 8580, 8590, 8595, & 9556.
Compaq: Deskpro 286, 386, 386/20, 386/20E, 386/25E,486/33M, 486/33L, 486s/25M, 486s/33M.
Hewlett Packard: 486/25u, 486/33LE, 486/33N, 9121D, & 9145A.
If interested please contact me.
8556
8557
8560
8570
8580
8590
8595
9556
I have the following CPUs:
IBM
5160
5150
5170
5271
5273
8530
8535
8540
8550
8555
Hewlett Packard
486/25U
486/33N
486/33LE
9121D
9145A
Compaq
Deskpro 286
Deskpro 386
Deskpro 386/20E
Deskpro 386/25E
486/33M
486/33L-4856
486s/25M
486s/33M
Monitors:
IBM 8518
IBM 9517
IBM 9518
Compaq 420
Compaq color VGA
Nokia 449E
Hewlett Packard
TOSHIBA T5200/100... Breaking !
Display and keyboard OK, case tatty but complete. PSU OK.
Motherboard shot! (moisture damagage)
Offers in GB Pounds + Shipping ?
TOSHIBA 4400SX
Any info on this please? Have tried Tosh's website without success. Possibly will need battery, but I really need to know max spec's etc for upgrading HDD etc.
Thanks... Adrian
I have a large Inventory of older computers like:IBM, Compaq, and Hewlett Packard.286, 386, 486 CPUs and Monitors.
Great for parts or starting computers for kids.
These items are all in execellent condition.
e-mail me to request a list of computers.
Hi,
I have a problem with my old monitor. It's an Acer of some sort,
not a very good monitor (dotpitch 0.39!). But it is the only
monitor I can afford right now. The problem is, that it seems to
have good days and bad days. Some days it is just impossible
to get a picture. I don't know if it's the monitor that finally
breaking down or does my videocard (Matrox Mystique) disturb the
monitor? Has anyone else had this problem?
Thanx, Micke
Hi,
Does anybody know where I could get a boot disk for
Kaypro 4 ? (CP/M 2.2 or 3.0)
hi everyone =)
just aquired an old epson 286 system... the previous owner changed the memory (it takes 4x30pin simms) and i require the "setup program on the reference disk" to correct a memory size error on start up.
the m/b is marked "epson Lynx" and it has model "AX2e" written on the front.
thanking you in advance, robert
If anybody is interested in a package that will include 6 computers, a laptop that includes a printer, a bout a box full of software, some extra hard ware (2 CD-Roms a internal and a external modem), 5 monitors, and a box full of old video game consoles; we are looking to sell it al for about $850 (including shipping). Please email me for more info if you are seriously interested only. I can sell each item also if that is all you are looking for. Laters....
Need a good Monochrom VGA monitor? A second monitor? Windows 95 compiant - why it is a monochrome 256 color vga monitor. We have over 1000 of them. If you get them in bulk - shipping is nothing. Canadian prices. Go check out our web page at:
http://www.cal.shaw.wave.ca/~ksigethy/monitors/iz.htm
and check them out. They are a bargain and we do deals on bulk orders. Sell them to local computer upgrade stores!
I'm trying to see if there is any way I will be able to hook up
an iMac (with USB ports) I am getting for my father with his old
Epson LX-80 dot-matrix printer (with a parallel port).
Does anyone know if a Macintosh driver for an old Epson LX-80?
I've already checked the Epson site.
Does anyone know of a parallel-to-USB converter/adapter?
email reply most appreciated. Thank you!
I have a Coleco Adam Computer that I would like to get rid of. If you are looking for one, please contact me.
I need some probs with a Canon BJC-210s laser printer.
If anyone has a list of its escape sequences please email me quickly!
Thanx a lot.
I have an old Compaq LTE 286 PC (no setup disk), one slightly used DOS system disk, a Compaq Laptop carry case, 2 battery packs, one bubble printer, one charger, and a Wolfenstein disk. I also have some old NES games, from 70 1o 100 dollars each. Not found in stores. I'm willing to trade the Nintendo set of games, and any of the other items (although, I warn you, the Laptop has a problem either with its C drive or its C drive-reader, and you have to download the setup disk from its web site to get into the bios to fix it). I'm also willing to trade any three of the items except for the Nintendo set. I'll take any palmtop from long obsoletes to just obsoletes. However, for any Palm Computing Palm Pilot, I will trade everything. If that doesn't please you, I'll throw in a Quiz Wiz with a few Cartridges and manuals. If you even know someone who might be interested, email me quickly and tell them.
I have a CompuAdd 325TX laptop with 2mb of RAM. Can the 325TX be upgraded any higher then 2mb of RAM, and if so, what type of memory does it use? -Thanks
I hav a Zenith model #ZWL-183-93 and i need to know what processor it has (how do i find out),it only has a 40mb hard drive but dont know how much ram.The owner wants to upgrade but i don't think it's worth the trouble (they want to run Windows 95on it) thanks fo any help you can give.
Hello.
I'm looking for an old copy of OS/2. Could anybody email me if they have any information?
ThAnX,
-Jason
I have the following surplus equipment for sale:
IBM 486 Valuepoint (model # 6482 0r 6384)---$100.00
-8MB RAM
-at least a 270 MB hard drive
-systems are bootable but hard drive contains no software
-keyboard included--mouse 5 dollars extra
-can be upgraded with CD-ROM, modem, larger HD, 133MHz OD chip
-90 day warranty
Various brands of 14" SVGA monitors------------$90.00
-IBM, Samtron, Compaq, HP, Dell are usually available
HP Laserjet III's------------------------------$225.00
HP Laserjet II's-------------------------------$175.00
HP Laserjet IIIP's-----------------------------$150.00
VGA monitors from $40.00-$60.00
e-mail at scottd@evansville.net or call 1-812-423-9166
You pay shipping
COD or credit card
We have a compac plus portable model 101709. I'm looking for the keys you press to get into the bios and format disks for this computer. It is not accepting dos 2.6 or 3.0. The message Im getting is bad command interpretor.
Wanted:
systemdisk for Epson pc portable model Q150A
I have a "486WB Cache Mainboard" with an AMI BIOS numbered 40-0101-ZZ1508-10101111-060691-OPWB-F. I'm looking for potential BIOS upgrades. The ZZ1508 indicator seems to be rather scarce.
I have a Compaq SLT 286. Does anyone know how much it's
worth, or anything about it??
Mike
I can offer people the following for free:
BIOS Setup program for XT and AT machines.
Information on old hard drives (inlcuding how to connect a D drive)
And to those who live in Hamilton New Zealand I can give you some free computer equipment including a Commodore 128 if you pick it up.
Start up disc for SVI328(boot up)
also any cartridges many
Thanks
Many people are posting asking for diskettes/manuals for Tandy Computers. You can order these directly from any Tandy/Radio Shack Store through the Software Express or National Parts ordering. Just bring in the catalog number of the computer (26-xxxx). This covers all Tandy Computers..
Color Computers
Laptops
Tandy 1000's
etc..
Wanted:
IBM PCjr or jx moderately priced.
Toshiba T1200 with hard drive.
Compaq Portabile (original 8086).
Information on a HP Type 46 hard drive (MFM) Model no. 97533-60051.
IBM PC original (first with BIOS)
DOES ANYONE HAVE THESE (WILL PAY VIA DIRECT CREDIT $US20 IF YOU EMAIL THEM TO ME:
MS Windows install disks for v1.x or 2.x
OR MAIL ME:
MS DOS or Windows OEM install disks for versions 1 and 2. (Will pay $40 for these)
Also send full bank account number.
Thank you in advance.
I have several cards to suit pc/xt. I own an acer
mpf-500+IIe2.
here is a brief rundown.
#1 Intell internal modem, model:PCCB 6000
I have 2 of these. They also have the number 301351-6 printed on the bottom of the board, a 6 switch mini dip switch on top and two 20 pin female "spike" sockets on top.
#2 Made by "Tecmar Inc."
marked "Captain rev D Tecmar Inc. 1983" Distnctive faetures are: 8 switch mini dip switch, battery, what appears to be 25 pin com port, & 6rows of 9 chips at one end of the board, furtherest from the port.
#2 Manufactured by "Sigma designs."
marked "Sigma Designs SDI-384 REV 1.2"
features; No ports on back of card,no other connections oncardbesides the edge connector for bus,8 switch mini dip switch, 6 rows of 9 (memory?) chips. This board is made in two halves joined by a 50 strand ribbon cable, & the 2 halves then fold & are stacked (seperated by plastic posts)on top of each other.
If anyone could give me any info on these items it woul be most helpfull. I would like to know how to configure the modem so I could use it. If anybody could help with any software required to drive any of these items I would be very appreciative. P.S. If anyone would like any software to use on similar machines please feel free to contact me.
I have several cards to suit pc/xt
I have just got an olivetti PC M24 with no hard drive, and a
5 1/4" floppy.
it is a i8086 with 640k memory, but I need a dos boot floppy on 5 1/4" disk
can anyone send me one?
postage returned
Simon Adams
P.O. Box 17015
London
NW3 4ZG
United Kingdom
Many thanks
keep up the good work people!
I'm looking for info and/or schematics for the Apple IIe
MMU and IOU chips. Thanks in Advance!
DECStation 333c Information Wanted.
I have a DEC CPU that needs some upgrading and I need some info about the on-board HD controller and the key combination to access the BIOS for setup. Also would like info about the functions of all the jumper settings on the motherboard. Thanks.....JOHN
I need user and technical manuals for a Zenith ZL-2 minisPORT laftop computer. Copies ok. Plus any information on standard options and hacking info. Also, this laptop has what seems to be a 2" floppy drive built in-what is the capisity of this drive and where can i get some disks of this format. And there was what was called a minisPORT HD model which had a harddrive built in, can this ZL-2 support an internal harddrive? Any help, info, or comments will be appreciated.
I have a 286/12 computer and battery went dead and I need a setup program to reset the cmos in th bios array if you can help me thanks
You could email me the file and i could download to this computer and transver if to the 286
if you can't help me please tell me who can ok
Need a system disk for Tandy 1000
Hi,
I have a Compaq Portable 386 that I am trying to restore. It's now running MSDOS 6.21 and I'd like to install Windows 3.1. Unfortunately I do not have Compaq's version of MSDOS, which had some alterations to the mode command, allowing you to set up the Compaq Plasma display properly. Does anyone know where I can get a copy of Compaq's version of DOS 3.31 or greater? Better yet, does anyone have a utility to properly set the plasma display into CGA mode?
Other ideas?
Thanks,
Steve Minar
P.S. The computer had been running Windows 3.1 for many years until a well meaning friend helped my inlaws install some new software... I may have to resort to buying a video card and installing it into the expansion slot to get it working again.
I have a Compaq Portable III, of which the power supply has recently failed. I have been able to hook up another power supply that I had laying around and have managed to get it to power the computer, but not the monitor, due to the lack of labels on the power supply saying how much voltage there is going through the cables to the monitor. I need to know the voltage levels that should be going to the monitor, and which wire in the cable corresponds to what.
Thanks in advance,
Kevin Pfohl
kspfohl@adelphia.net
I am having trouble with linking two computers together via their
serial ports. I have the DOS program Zip 2.02a, which can transfer
files between the serial ports on IBMs. Problem is, I can't seem to
be able to send anything larger than 16K. It will show 8K sent, 16K sent,
and then . Please help!!! The computers are a Compaq 80286 and
an IBM Aptiva 80486.
Thanks
Chris
working on an old 286 epson 0201a. There is a parity error and
I need to access the bios,what is the key or keys to access
the bios
Still looking for OS/GS. Also, how do I install OS/2
version 2.0??
Thanks,
Mike
Does anyone know of any good tutorials for QBASIC on the internet
i have an old toshiba laptop model t1200. i need to know
more about this equipment. if you have some information or
manual???
Where can I download old DOS versions?
Please e-mail!
Thanks!
I have a compaq modem "assembly # 225150 - 001 rev" JP3 is the only selectable jumper. How do I know what comm and IRQ I am at?
I have a 386 dx 40 with a 387 co-processor installed.
How do i force windows to use it for maths instead of the cpu?
cheers
shard
ARCHIVE TAPE BACKUP software wanted! FASTAPE
I believe there ares three files
FTINSTALL.?
FASTAPE.COM
?
If anybody knows where I can get them please let me know,I would greatly appreciate it.
John Teeny
Hi!
I need a Dial-up adapter for and old laptop computer that I have. It runs on DOS, and I have Lynx installed on it. I just can't connect. I also need a packet driver (I think that usually comes with the dial up program.
If someone has an old text-based DOS browser wth built- in dialing, that would be helpful, too.
ThAnX,
-Jason
I am looking for a patch file that will allow me to run GW-Basic under Windows 95. Do you know where I can obtain such a file?
I have 7 Wang terminals that I would like network somehow. Is it possible to use an IBM compatible as a server? Or is there another way without having the actual Wang server.
Thanks
David Moran
Looking for instruction manuals for Apple IIc and Tandy
TRS-80 Model II. Photocopies Ok.
Thanks Pete
Does anyone know where I can get a power supply cord for the keyboard of a 1984 Commodore 64? I would like to get it for around $5.00 because I don't know if the computer works.
have a tandy 1400hd laptop I need a dos 3.3 boot disk to make
it work. please help
Have acquired two oldies. An Empac XT with DTK/Erso/Bios
2.29(C)1986. The other an IBM Personal Computer AT made by
Datatec. It has DTK/Erso/Bios 2.36 (C)1986. Don't know how
to access Bios on either one. Please help. Many thanks.
Hi does anyone know where I can get a copy of OS/GS, and
some software to run on it? I only have an IBM hooked up
to the web.
Mike
HELP NEEDED WITH MACINTOSH M0001 (Mac 128)
Ijust got the above mentioned machine but when Iturn it on
I get a little picture of a floppy discwith a question mark flashing on it.Does this mean its looking for boot files? Is my hard disc fried? Can some one help me with boot files on floppy so my wife doesn't kill me for buying an old computer that doesn't work? (Some people just don't appreciate the value of rare antiques)How about software? Is there a download site? I would be happy to reimburse some one for boot disc and software. How about a hard drive? How can I tell for sure if it is the hard drive and where can I get one?
Thanks....Bob
Still looking for the following things:
- Software for the HP 2647A (it comes on cartridges type HP 200 Series 9800)
- Manuals/informations about the HP 9000 model 520
- an Intertec Superbrain in working condition
- a TI Silent 700 (Terminal)
- some other terminals of the good old 70ties :-)
Thanx a lot in advance for any kind of help.
Gaby
Wanted:
Copy of OS/2 to run on old IBM laptop.
Let me know if you have a copy.
ThAnX,
-Jason
I just moved and broke out my old Commodore SX-64 for the first time in years. It still boots and appears to be working, but the video is "scrambled" on the cute little built-in monitor.
Any Commodore hackers around that can fix this, or give me a clue what to try to isolate/fix the problem? (I've considered running another video source into the monitor to find out if it's the video output of the 64 or the monitor, but haven't had time yet.)
P.S.: Sorry, I'm not interested in selling, but I do want to get it working again, both for myself and the kids. Nothing I have now is half the fun the old 64 was - and I still think GEOS ranks as one of the great hacks of all time...
Forgot, I have software to sell for a friend that doesn't do internet:
Microsoft Office PROFESSIONAL & Bookshelf - Upgrade. Contains Word, Excel, PowerPoint, Schedule, Access and BookShelf all on 2 cdroms. This retials still at roughly $250-$300 and this is in the box, all manuals and cdroms.
Upgrade version for those running Win95 and one of the following products: MS Office, Lotus SmartSuite, Perfect Office, and tons of other stand alone word processors, databses, presentations, office suits and spreadsheets. If unsure, drop me a note with what you run and I can tell you as the list is long.
He needs $100 for the package plus $5 mailing in the 48 lower states. AK and Hi may carry a little more postage. Email ME for info on this package.
Tandy 1000HX w/640k and two 720k floppies, immaculate and collectable condition, ROM DOS - $20 plus USPS parcel post shipping (about 22 lbs rate).
Direct email if interested, also may trade.
Do you know how to restart a 7 year old ZDS 325 which has a flat battery, or do you know a telephone number for ZDS in the UK.
I have a Panasonic KX-P1124 and I need to replace the fuse... where is it and how do I open the case???
After a lot of searching on M4-434 motherboard settings I found it on http://ctsweb.olsy.co.za/pages/m4mbd/m4mbd.htm
Superb information and much better than Olivetti Sweden ever managed to get for me!!!
My problem is very briefly that I need to upgrade a few PC:s (actually 3) M4-434:s with one more harddrive. Every PC have right now a hard drive and a CD-Rom connected to the "Local Bus IDE VESA HDU Conn". Is it possible to use the other "Hard disk conn"-connection on the board and end up with 3 objects connected altogether?
Need a Western Digital CAVIAR 850 to fix mine. Mine has very important data on it but the board got shorted. Need a drive of the same size even if it has bad sectors. Board number wdc 60-6000580-002 revd Thanks
I Have Several Computers 386 & 486's
Rangeing From $300 To $500...
Take You Pick Of My Pre Assembled Selection...
Or Request A Custom System...
Pentiums And PII's Are Obtainable...
Also Parts...
Misc Cards/Cables/Ram/HDD/FDD/Tape Backups/CD-Roms...
Make A Request...If I Can Get/Have It I'll Give You A
Price :)
The Two Systems I Got Assembled Are Almost Twins
486 (30 To 66mhz)
VGA/SVGA Monitors
SVGA Video Card
IDE HDD & Controler...
HDD (500 Megabytes)
FDD (3.5 And 5.25)
Keyboard/Mouse/Power Cables
Windows 95/Dos 6.22
2x CD-ROM (Only 1 Right Now)
$400 Without CD-ROM
$450 With CD-ROM
$600 With CD-ROM & Multimedia System
Got a INEX3000 made by NAE WAE Semiconductor Co LTD model JCUN 386SX25 -it's missing a HDD and one internal board -would like to find some parts or sell it for parts
HELP!!!! I have a problem with my Connors CFS210A. I upgraded this unit and placed it into a 386. It now says ERROR OS and it will not let me boot up unless I have a disk. I ran scandisk on it it say it can't fix a FAT error. How do I get back into it to reformat and take the error off. It work fine before I tried to reinstall it into another unit>
Still have tons of Dell 325 (386SX-25) machines w/ HDD and floppy, no memory for $30 each plus shipping and a lot of different collector's machines in great condition from 5150 PC and up - 5170 AT's for $30 with whatever they came with but no KB or monitor, most with HDD.
Looking for something, email me direct....
I have some western digital mfm controler cards and several seagate hard drives,I need to find a third party software for the low level format routine,might anyone know where I could download this sort of thing.- THANKS!!!
I need shematics, and parts for an IBM PC Junior, and key caps for an 83 key keyboard, as well as help with an AST 286.
First the PC Junior... its hooked up properly, but the CPU seems to have no power, can I get a new power supply anywhere?
The keyboard is okay, but is missing a few keycaps, can i get these anywhere?
The AST 286 boots, but when I hook up the 83-key keyboard, it beeps and crashes. Any advice?
Thanks Alot,
Jon
Does anybody have a copy of their Powerspec system disc?
My power switch blew out, so I replaced it and now I need
a system disc so I can copy and get my computer working again. I bought the Powerspec PC at Microcenter in Houston,
and there was no system disc included. Now I need it badly.
Does anyone know how I can copy MS-DOS (THE COMPUTER USES WINDOWS 95) off of my computer onto 3.5inch floppy disks so I could get an old computer with a deleted hard drive I have working.
Where can I download Microsoft Windows 1.0 ?
Please e-mail me!
Thanks!
Hi,
Does anyone know, where to download Microsoft Windows 1.0 ?
I'm also interested in old and nostalgic pc-programs (MS-DOS 1.0 etc...).
Please e-mail me!
Thanks a lot!
PS: Thank you for answering my other questions about the controller
and the motherboard!
Need Apple II GS System Software
Additional S/W would be helpful also
I have a ProMicro 486DX2-80 with a Green VLB main board. Current I have two double sided 8m FPM modules installed and it works O.K. If I replace them with two 16m modules of the same type according to the manufacturers specs the system will not boot. I can hear the post memory click but nothing appears on monitor. All jumpers are according to manual specs. I have parity checking disabled in the bios.
I have a chap here with an old AT286 that has forgotten its BIOS settings. As I am sure you remember, in those days, the BIOS was entered using a setup floppy, but of course, this is no longer available. Can you point me somewhere I can download such a thing?
The Version is: C1.10
Date: 11/15/85
TIA
Declan Magee
Tech Support
Westinghouse Signals Ltd
Chippenham
UK
Looking for a Power Supply for a PC Partner by Leading
Technology Inc. File N0: E119095, Model PC Partner XI.
Any help?
I recently acquired an old DataVue 25 portable but I don't have any manuals or instructions. My main problem is that the machine doesn't recognize A: on startup. Anyone have the manuals or just advice?
Hi I'm looking for a fax/modem and 4mb of memory for a compuadd 325tx notebook Ron
Just acquired a Gateway 2000 Handbook (the "286" version).
Looking for the RAM upgrade and the external floppy unit (aka the "combo unit").
Also - it came with the original diskettes and manuals. Anyone out there need any info from the manuals or files from the diskettes?
To respond, please remove .nospam from my address.
Several recent posts have asked about BIOS upgrades so they can use big hard drives in older systems. Finding a real compatible BIOS can be difficult, but there is an alternative. Several of the drive manufacturers have software patches (Maxtor's MaxBlast and Western Digital's EZ-Drive, for example) that you can download from their websites for free. Maxtor's URL is the easiest to remember - it's www.maxtor.com.
There are also BIOS Enhancer cards that fit in an 8-bit ISA slot (Promise Technology and SIIG both make them). I've used these with varying degrees of success.
If your heart is set on a full BIOS upgrade, try Unicore Software, Inc. (www.unicore.com).
Looking for cheap monitors. Many to choose from. New,used,and refurbished. VGA's starting at $20.00!!!
http://home.sprintmail.com/~jochal/Videomonitors.htm
Also check out my computer parts page. Keep an eye on it. Sometimes it's packed, other times it's not. But whatevers on it, it's a bargin.
http://home.sprintmail.com/~jochal/computer.htm
I have an IBM ps/2 model 70 and I need to get the software to edit the BIOS on it. Can anyone help me out?
J. Ochal
Hi!
Looking for the following:
-SETUP disk for Compaq SLT 386s/20 (can't download from Compaq's website)
-GATEWAY 2000 Handbook. Any speed, any size RAM, any size HD. As long as it works and is a good price.
-TANDY laptops- working, low prices. Any model but the 600 and 1400 (I already have them).
FOR SALE:
-IBM XGA MONITOR- Works great. needs XGA/2 adapter.
-Toshiba 200CDS laptop - refurbished. email for more details.
-TEXAS INSTRUMENTS TI4a- I have everything (main unit, a few cartridges, TV converter, Composite converter, manual). all you need is the adapter (I have the voltages).
I will trade various things for any of the "wanted" items above. I also still have a few XT parts in my basement. email for more details.
-Jason
seeking any information about Epson equity IIs made early 1980s, especially info about how you do setup. This one boots to A but RLLs cannot seem be made to work with
Everex controller or WDS. Tried all kinds of old Hard drives but no success. Trying to restore as original.
seeking good motherboard for proprietary Gateway 2000,
4DX2-66 (with or without chip). Am restoring series of all Gateway models and video on my model does not work. Any paperwork (layout of board, manuals) would be much appreciated.
i have on disk for anyone who needs it,
dos 3.0-dos4.0 dos5.0 and the autoexec.bat and config.sys according to each version. 5.00$ for the disk , 1.50 mail.
Does anyone know if you could upgrade from a 386SX, to a 486cpu...
Also does anyone know of a website that you could get the full version of DOS.
I hava a macintosh quadra series which I bought for 200 dollars. I was wondering if I can run internet explorer or netscape navigator on it.
i have a zenith supersport that needs the cmos set how can i access this?
I was just wondering it the is any 286 to 386 uprades????
For the cpu that is a little waffer and is cover by a peice
of metal and is held in no other way?
i went to my closet today and found a timex-sinclair 2000 with printer, games manual, system and instuction manual, and 6 game cassetes, and a 64 character system cassete. all its needs is a tv switch box and cable to the tv to monitor the system. all of these items are near new condition. anyone out there able to put a value on this? kj
Is there such thing as an IBM X-10, or is it a mispronounced
XT??
Thank You,
Mike
HP-UX HPUX Hewlett Packard Unix 9000 series 300
I must run HP-UX 9.01 on this machine, but can't get
old disks that are recognized by the install CD. New
disks are usable as mounted filesystems, but fail with
the install CD's script. The problem is that the install
CD is the only way of making a root filesystem which has
its primary swap configured. All my attempts to dd, cpio,
dump-restore, a working root disk to a new disk fail on
boot with a panic about the primary swap being unconfigured.
Anyone with a source of older disks, or a way to get around
the Install CD please let me know. Thanks, R
Hello again,
I have in my possesion a black RM Nimbus 380Z With all the manuals. This was the only 380Z that RM made(or so I thought). The otherday I managed to find a blue RM 380Z!. Does anybody have any information about it? I am also looking for a power key for the Black 380z as it has a key power switch.
Many people seem to have trouble finding drivers for their PC's. This is because many PC's are made by different companies, and then branded differently. A way to find out who the original manufacture was is to look for a FCC id number. if you then type this number in at http://www.fcc.gov/fcc-bin/ead it will tell you who the manufacture is.
Hi
Has any one got a broken LTE LITE/20 as I need a display and
battery charger for one.I hope some one can help.
Thanks
Martin Stevens
I lost my BIOS password.
Motherboard: YANG AN YA-1 E114139 94V-0 9506
Ho can help me with the jumper setting for releasing password?
Hi
I am looking for a setup disk to reinitialize a 286 PC made by Sperry. The motherboard is by mitsubishi. I boot it up and it ask for the "Setup Disk".
Please Help.
anyone need this memory expansion board?
couple $ for shipping, and its yours.
I have absolutely no idea what it is for.
Mitsubishi WFLEM1, has sockets for 6 x 6 of 4164-15 dram.
1/2 populated.
..pat
Manual OPTI motherboard type v4p895p3/sm1 v.4,0 -
can anyone help me to find & download this manual.
Wang-cs/ds and 2200
Look for anyone to exchange information on wang computers
Have lots of wang stuff here ....
I'm looking for any information on a Dauphin 1050 notebook computer. It's a 386SX20. There is no HD, so I'm trying to boot from the floppy. What I'd really like for starters is the pin-out on the power plug. I'd like to know if the inside or outside of the plug is the + or - .
---
| 0 | ?? + outside or the post inside?
---
I don't want to fry it trying to rig a power source. Also any info on the size and type of power supply needed. I'm guessing it needs a 12 volt system of somekind, the battery says 12 VDC / 1.7 AH. I have a 12 VDC / 500ma I can use, think that'll work?
Any Info that anyone can supply would be greatly appreciated.
Thanks in advance!
Brian
Hi,
I'm looking for jumper-settings for an old "data tech corp"
controller card. 5187 CRH / 393 S00376 / Fab.-No: 01-00364 Rev B
Thanks a lot!
I just was given an old portable made by the Columbia Data Products, Inc., in 1985.
I've tried to find some info on the company, to no avail.
Any information, ANYTHING! will be greatly appreciated.
Thanks so much.
ihave xt with an error message K-B when it boot up what does it mean
Help! I just aquired 3 SMC 8 Port 10BaseT hubs, there is only one problem with them, they don't have any power adapters. The Model # of these is SMC3608TP, and the interface is a strange 6 pin interface. If anyone has or can help me find adapters for these, I would be very grateful.
Ok, I know this is not really an item for the helpline
but I'm DESRERATE I just killed my 486dx4 motherboard!
Does anyone out there have a MTI r418 motherboard or equavilent that I can buy. or know someone who does.
help me...
I have a Zenith Laptop Z Star EX, model number ZPG-9861-KS, and I need a manual for it.
Any ideas where I could find a manual?
Thanks.
Hi!
Searching for ANY information on a Compaq SLT 386s/20 computer. I ESPECIALLY NEED A SETUP DISK!!! There is a math co-processor in it that isn't being recognized. The coprocessor if fine (tested O.K.), but I need to tell the computer that it's there. It's running slower than it should, because it's confused.
PLEASE HELP....
ThAnX in advance,
-Jason
Need at least one SIMM memory for a Compaq 286SLT notebook/laptop in either 1, 2 or 4 mb. These are special types that plug in and have the card edge plug to one side. Direct email if you may have something. Manuals would also be nice, need at least one but possibly two.
Also "shopping" for the possibility of a docking station for the Compaq 286/SLT notebook and other items. Prefer a trade if possible, have lots of goodies.
Direct email if you have anything please.
I have just aquired an IBM ps/2 L40sx (with no manuel) and am having trouble installing JUNO. Does anyone know what modem is in this model?
Hi there,
Here a question from Holland:
I'm looking for someone who knows much about old Apple's.
I have an Apple ][ Europlus witch is working fine.
I have also a computer without a name with is looking
very much like the Europlus, but the keyboard and the
inside is a little diferend, it also has a memorycard
in slot nr.0. I can use the IO-card and also the drive
from the Europlus. The powersupply is carying the name:
SUPERCOM MODEL NO: SPS-41H serial NO: 202364
I can execute most programs from the Apple //C on this
machine witch I can't use on the Europlus.
Any Idear what it is ??
Allard
hello folks
i am very happy with this helpline
the question now
i have a siemens pc-mx2 mini but no software
can anybody help me to have the system running
see also my homepage
http://users.pandora.be/lust
I have been attempting to install a 2.5gbyte fujitsu IDE drive into a compaq deskpro 3/25i in place of the 80mbyte drive.
The setup procedure will not allow the configuration of drives with more than 2099 cylinders. (The 2.5G drive has 4098 cyls.)
even if the next largest drive is selected in the setup list (#81 is a 2.1 gbyte drive with the same head/sector count) FDISK will never find more than 508 Mbyte drive. I suspect this might be a BIOS limitation.
Does anybody know of a BIOS upgrade for this system which will permit drives above 508 Mbyte?
Okay, this is directed to anyone and everyone that has seen my messages about DOS 6.21 with Doublespace. I have the copy in my hand and I now see the error of my ways. It is not DOS 6.22 or 6.21 or even 6.2 It is however DOS 6 with Doublespace just plain 6 and yes I have checked the record books on this one, there were 1543 copies of the program installed onto the harddrives of computers that were bought. There were 500 copies of the program sold to comsumers in the boxes that were "on the shelf". So I am sorry for any inconvienience to anyone and yes this software semirare. And If you would like to purchase it from me it is for sale. Send me a price and we can talk. I also have 11 unused and unopened copies of DOS 3.30 that are for sale for $5 a piece + $3 s&h by Priority mail. Also for sale are 9 unopened unused copies of IBM PS/2 Model 25 Operation Manual and Starter Disk for $2 a piece and s&h depends on where u live.
Also if anyone has anything regarding the Compaq SLT 286 in the way of manuals, memory, battery, expansion base, etc.... I am extremely interested in these items and can pay money for them. I am desperately searching for anything at all related to the Compaq SLT 286.
I Also have a number of atari item that are for sale or trade for a working Atari Portfolio, 64k mem card, and pc to mem card reader interface. For a list of what atari stuff I have, email me and I will send as soon as possible.
Thanx in advance,
Casper
Also, one VERY important thing, it's a laptop. Tahnk you for any help you can provide.
I have a old NEC 486SX/C. I cannot seem to find any drivers to get the C drive to work again. It only reads A and B right now. Where could I download the drivers for this dinosaur?
I am looking for mainboard jumper settings for a
DECstation 425c.
Any help would be appreciated. Thanks
Hi
Has any one got a old non working LTE LITE?20 that they
wantto get shoot of.
Thanks
Martin Stevens
Looking for a floppy drive for a PS/2 model 60, have one for a model 30
Anyone have one around that they are not using?
trade for the model 30 floppy drive :)
I have a zenith data systems laptop that was given to me. It is a 286 supersport. I looking for someone to help me syntax in the systems or other commands. It has a MFM 200 Command Summary, but I don't any of the syntax.
Please Help,
Thanks
Marie.
am in the process of attempting to rebuild and update an old Compact computer in our lab for the learning process.
It is a 486DX ISA BIOS (KB-BIOS-Ver F P80428AP?)
Serial # AA0284401
I think I will need a newer AMI BIOS that is compatible -- is there such an animal?
MB = 20081732 AT4305H Made in Taiwan FP043C2157
Can it support stacked memory? We have slots for 8 1 mg memory chips.
Will it accept 2 mg SIMS?
It has an Intel 486DX 33 mhz chips -- can our MB handle a faster chip?
It also has a Varta Barrel Battery Nicad 3.6v 60 MA -- do they still make these? If not, what would be a current replacement?
Thanks!
Need cache enable program for improveIT technologies Make-it 486. Disk I got with this was trashed (as usual).
Hi everyone!
I am looking for a Motherboard for a TI Microlaser Pro 600/
JX-9601.
Did anybody knows where i can get a memoryextention for a Fujitsu
M3716MG Laser Printer?
Thanks, Eric
Looking to upgrade BIOS on CompUSA Compudyne 486 dx2-66 to
install larger disk with win98.
Any suggestions as to where to look. AMI and CompUSA not much help.
I have a an old copy of Windows 3.0. Someone had posted a request for
it, but now the message seems to be gone. Let me know.
I have an 8 inch disk. does anybody know how much its worth?
i have a 486 dx 100 3 volt chip that i want to put in to a 486 3.45 volt motherboard do you think it will harm it or what ?
I am looking for a printer driver for an ollivetti pr 2840
I need a copy of GW BASIC that I can run on my Pentium 100,
Windows 95, 32k, etc. which came with Q-BASIC. My phone number is (520) 778-5457 after 11 AM Mountain time.
I have a PS/1 2155 model 90P (sl-B) that had a DX2-50 cpu in it that I have changed to a DX2-66. Having done something simular to an aptiva with Mwave I know I need a Bios setup to read the new cpu. Where can I find one on the internet ? I already searched IBM with little results.
I require a top/front case for a Ambra laptop. #nb9800d The hinge is broken on one I'm considering purchasing. Searching for available parts is suprising. Surely someone has a good or new front cover for a reasonable price? Please let me know. This IS world access.
I'm looking for jumper settings for Tandon-TM 6001A's
(XT-clone) motherboard. (Tandon Switzerland has some
manuals at their www-pages, but since they never sold
this model they don't have the manual.)
Also "shopping" for the possibility of a docking station for the Compaq 286/SLT notebook and other items. Prefer trade if possible, have lots of goodies.
Need at least one SIMM memory for a Compaq 286SLT notebook/laptop in either 1, 2 or 4 mb. These are special
types that plug in and have the card edge plug to one side. Direct email if you may have something.
BIOS questions...
1. Where do I get an updated BIOS ROM
2. Will any brand of BIOS work in any brand of motherboard.
Don't laugh but...
It's for a Packard Bell 486dx2-66, the BIOS wont allow a hard drive over 500 meg(give or take).
Please help if you can, thanks
I was wondering if anyone has hardware specs on the Compaq
Portable, or at least the pin-outs for the monitor cable in it.
thanks
I have a Compaq DeskPro 386/33L. I'm looking for a power supply to replace the defective one. Does anyone know where I could get one?
I am looking for Jumper settings on a SAB-757 io/ide controller Card.. it has a winbond chipset..
I am looking for Jumper settings on a SAB-757 io/ide controller Card.. it has a winbond chipset..
Looking for help w/ an Apple III+ 512K w/%MB Hard Drive.
I have an old IBM PS2 model 50z Type 8550-031 serial 72-7141420 It needs a hard drive but more importantly I need any and all info about cmos setup, error codes etc. (yes I'm new at this, learning everything I can) Thanks
Looking for specs on an Acer V30 motherboard. Jumper settings, etc. Got a copy of Microhouse, but my version doesn't have it. Not sure what model the unit it's self is. Just the board.
If anyone can get me a URL or FTP site where I may find documentation, it would be appriciated.
Thanx in advance.
Michael.
hello
i have just aquired an ibm model no.5150 dual floppy(5 1/4")
i need a boot disk and any documentation on this machine.
any help will be greatly appreciated
peace to you and yours
floyd
Hey! getting a new "franken-puter" together!
will be looking for any good used smaller capacity
(cheap)IDE drives soon. e-mail me if you got any.
Also my poor demised 386 signed its organ donor card..
the following parts are ready for transplant;
386-DX DXL-40 processor(no math)$5.00
AMI Bios 1986---$5.00
128 K cache modules--- $15.00
all worked fine before the quartz clock died.
prices are very negotiable.
will give up the whole board for spare parts
for the right price.
(I decided not to bury the poor thing afterall...)
Who knows something about old 486DX-mainboard jumper settings?
I own the following mainboard: "TK8880F/2066A2" (this number is on the
front) "TEAN TN1 94V-0" "9521(in digital letters)" and "B10-41-313" (all
on the back) (I don't know, who's the manufacturer!)
BIOS: AWARD SOFTWARE INC. 486DX (number on the chip: J309388)
Chipset: UMC UM8881F and UM8886F
Please e-mail me!
Thanks!
PS: Best answer will be paid ($50) !!
Who knows something about old 486DX-mainboard jumper settings?
I own the following mainboard: "TK8880F/2066A2" (this number is on the
front) "TEAN TN1 94V-0" "9521(in digital letters)" and "B10-41-313" (all
on the back) (I don't know, who's the manufacturer!)
BIOS: AWARD SOFTWARE INC. 486DX (number on the chip: J309388)
Please e-mail me!
Thanks!
PS: Best answer will be paid ($50) !!
Hi alls!
It's a few problems:
1. I have damaged external modem SmartLink 2834A (FCC ID: FI 794082834). I look
for EPROM file of this.
2. In my collection is LASER 2001 with 5.25" FDD. In disk interface DI 100A is
bad ROM 2364 type. Wanted EPROM file for this , any software on diskettes
and compatibility info will be appreciated. It's 6502 CPU machine(not compatible
with Coleco Vision) and VideoTechnology made about '83.
Cheers Jerzy
I've just come into possesion of a very old toshiba T1100 plus
and was wodering where i could get a system disk for it, and which version i need?
I've just come into possesion of a very old toshiba T1100 plus
and was wodering where i could get a system disk for it, and which version i need?
i bought a epson apex100 at a yard sale for 5 bucks. the problem is the guy put a password in and forgot what it was so im like stuck. please help me
Hi
I recently found a Configuration guide from Hewlett Packard: HP JetDirect Network Interface (1994).
If somebody need this 150 pages book, let me know, I will send it for free (just S&H).
Chris
I am selling GWBASIC design software. I did not know that
later models of PCs did not have GWBASIC installed. Is it
legal to give people disk copies of GWBASIC, BASICA, or
BASIC ? is there a URL that will let me download BASIC.EXE
programs?
I just came across an old Leading Edge computer Model # DC-2011. I was wondering if someone might have some documentation about it. It came without any RAM and I would like to know what kind? I sure would appreciate some help.
i just got an old Compaq 386 LTE. it sounds stupid, but
i can't get the battery to charge, and i think maybe i'm
doing it wrong. Does anyone know the correct procedure
for recharging the battery on such a machine? Any help
would be greatly appreciated.
Sorry for Taking up Un-necessary space.
PLEASE IGNORE PREVIOUS POSTINGS
MISSING INFORMATION / WRONG E-MAIL ADDRESS
I have a Toshiba T5200/100 which gives only the message "CACHE MEMORY ADDRESS ERROR". I can't even get into BIOS. If anyone knows the correct chips that I can replace or has any further info please e-mail. Many Thanks . AL
PLEASE IGNORE PREVIOUS POSTING.. MISSING INFORMATION.. I have a Toshiba T5200/100 which gives only the message "CACHE MEMORY ADDRESS ERROR". I can't even get into BIOS. If anyone knows the correct chips that I can replace or has any further info please e-mail. Many Thanks . AL
I have a Toshiba T5200/100 which gives only the message >. I can't even get into BIOS. If anyone knows the correct chips that I can replace or has any further info please e-mail. Many Thanks . AL
I have a toshiba T3100/20 can the harddrive be upgaded to a larger one say in the order of a 120 Meg or better?
I am looking for an old (very cheap) laptop. Broken LCD screen (but working with monitor) or box - OK. Hard drive not working - OK (but has to work with floppy). Also, any stage laptop (does not have to work) with integrated CD drive. Thanks.
i am looking for a printer driver for a toshiba p321sl.
it seems like i've been searching net forever to no avail
and no support from any toshiba webpage. any help would
really be apreciated. thanks
Toshiba Satellite 2130
I have a 2130 laptop I bought used that I loved. I dropped it off my kitchen counter, and now it needs a new harddrive. Do you happen to know where I can find a harddrive and instructions on removal and replacement?
Matt,
Your mouse is NOT compatible with a Mac Plus. A Mac Plus has a serial port for the mouse, not an ADB port...
Try Sun Remarketing to get a mouse/trackball compatible with your MacPlus...
You wrote:
Matt Antonellis
seattle, wa usa - Saturday, July 11, 1998 at 00:13:30
I have a KENSINGTON Turbo Mouse version 3.0, model #62358. But I don't have the cable to connect to a MacPlus. Would like a phone call if you know how I can solve this? local (West Coast) Matthew 206-343-7576 THANKS
I've a Compaq Contura 3/20 and have bought a 8mb simm for it
which fits fine. However, when I boot up it is not recognised.
I've searched for a bios update from Compaq but can't find one.
Does anyone know if this update exists? If so, please tell me
where I could find one.
Cheers, Iain
Toshiba T1200
Looking for any info or help On them.
Have one in woking order, just looking for software and upgrade possibilities
I have fixed my problem listed below.
I have a NEC PC-8300 that iam tying to get to connect to a BBS. But whenever I enter the "stat MI71XSP10" in TELCOM to change the communication parameters, it just beeps at me. I have tryed the defalt parameters that are in the manual but it still just beeps at me.
Thank you for any help,
David Moran
Casper,
Whoops my apologies,
I jusrt checked my copy IT does have drivespace
instead of doublespace the documentation
wasn't changed.
again i overshot my mouth.
Sorry
Casper,
I have dos 6.21 with Doublespace...
how rare could it be?
Thanks to all who answered my XT question about adding a 3.5" Hard Drive.
My new problem is...
I just got a Genoa Systems Super VGA 8-bit Card (model 5100 / BIOS ver. 2.1).
It has a VGA and an EGA connector.
When I put the card in and fired up the machine the GENOA BIOS message was displayed and everything looked ok but then the computer should normally put its name, FiveStar XT, followed by all the cards in the system and their address (video card, printer, async comm.) then do a RAM check, then load config.sys and autoexec.bat.
When this card is in there however, the machine displays the FiveStar XT line but then puts the message "Error #04" and waits. If I press enter it goes on to the config.sys and autoexec.bat files and stops at the c: prompt. I can use the graphics card to play Simcity (only graphical game on the system) just fine.
I want to know what the message "Error #04" means and what I can do to get the machine to boot normally.
Note: There are 4 dip switches on the face of the card and they are all turned to the off position.
Thanks,
A. Keith Krueger
muakk5@wiu.edu
Looking for software: "Carbon Copy" for DOS v 6.1, Host. Appreciate very affordable price. Probably need registered copy so it may be updated when necessary. Info on software buletin boards also appreciated. Thank You.
I have a NEC PC-8300 and would like some info on it.
I need to know how to connect to PC-8300 to my IBM.
I also need to know how to load files of a tape drive.
Thank you for any help,
David Moran
Got a Mac 512k with a GCC Hyperdrive with dead floppy disk drive. Anybody have 3 400k Mac disk drives they don't need. Also I need a Hyperdrive utility disk so I can format and use the hard disk. Thanks
I am getting ready to give a COMPUDYNE 4DX33 to my fateher. I just put in 8 4MB memory modules, but the machine is only seeing 4 (16Mb). Does anyone know the jumper or bios settings to see and use the other 16MB of memory.
I have Compaq SLT/286 notebook computer from 1987 or 89 and I need a new battery and I want a docking station or expansion or whatever you want to call it. I am also looking for memory chips and/or anything else that will work with this model notebook. I am extremely interested in finding any item related to the Compaq SLT/286. Please if you know of anyone who has any of the above items, tell them to contact me. I am willing to pay money for the items. I am desparately searching for these items.
My email is pb4ugoout@aol.com and I check it every day. Will try and respond to all mails concerning this matter.
Thanx
Casper
I have tons of atari stuff that we want to get rid of. It takes up to much space that we dont have. I also have a very rare copy of MS-DOSÖ 6.2 w/ DoublespaceÖ. This is not 6.22
This version was made right before 6.22. It was recalled when MicrosoftÖ was sued for useing the product called Doublespace because they didn't have the rights to license it with DOS. Only about 1000 of these were made and over500 of them were preinstalled on computers. which leaves only about 300 to be bought from a store with the disks and manuals. The merchandise is unopened and on 5,25 disks. This software is very rare and cannot be found without a high price. I am told that to this day only around 50 unopened copies exist. This comes from MicrosoftÖ. Dos 6.22 was made to make up for the mistake the micrsoftÖ made in 6.2 I am selling this software to the person who gives me the highest price. I am also selling the atari stuff to the person with the highest price. To find out what I have tell me what u want and I will tell tou if I have it.
Thanx.
--------------------------------------------------------------------------------
In desperate need of a monitor for my EPSON QX-16 anyone know where I might purchase one?
I have a Packard Bell Statesman Laptop that I just
purchased used. It is a 486 33mhz with 12 megs of ram
and a 200 mb hard drive. It came with a disk to
reflash the bios or, in other terms, change the settings.
There where a few things that I needed to change. One
was that there was a beep from the PC speaker when a
key was pushed. As I ran the bios reflashing utillity
it froze. I then restarted and when I did the hard
drive powered up, but about a second later the power
light started turning on and off. It turned on and off about
once every second and when ever the power light would change
there would be a soft clicking sound from the PC speaker.
Every time it is turned now it does this and doesn't start
up. To turn it off I have to disconnect the power supply.
I have taken my Laptop to several computer repair
places and everyone said it was a different problem. They
all said it would be more than it's worth to fix.
My Laptop started doing this only 2 days after I got it
and I can't take it back. It's unuseable like this. I don't
have enough money to get a new motherboard or buy any major
parts. If there are ANY sugestions you have they would be
very appreceated!
Thanks for your time....
I would appreciate being contacted by anyone who might have the proprietary interface card or a sound card with such interface for the SONY cdu33a-41 type cd rom drive that they would consider parting with for a reasonable price.
Thanks SGT
I need set of keys for my nec.425S Overide(486dx33)to get
to the bios to change the system setup.
Does anyone have ( or have a URL for ) the dip switch
settings for a Victor GEGA 480 video card?
The machine had a PSU fault and, when it failed the user
messed about with the video card dip switches. I have got
it working partially by deducing some of the switch
positions by the dust on the switches :) but its default
mode is, at present mono40 so the initial startup screens
look rough. I would like to set it to default to co80.
TIA
Pete
I have a 486DX33 laptop made by a company called "KRIS" or "Kris." Anybody familiar with that company? The model number is TS34X-25. The keyboard has gone out on me (part #ADTS3420102) and I can't seem to find a replacement part. Help!
Can somebody please explain the
process of getting something C.O.D?
I just answered an online ad and the guy seemed
offended that I suggested sending a money order
He said he usually did C.O.D.'s only??
confusion abounds....
and on that note of offending people.....
I said I was sorry about dissing IBM's support service
so enuff with the e-mail slamming already :)
1) The Texas Instruments TravelMate 2000 Notebook Computer was a Sharpe Notebook repackaged in a TI box. Does anybody know what the Sharpe equivalent was called?
2) Where can I obtain a new battery for the Texas/Sharpe notebook?
Does anyone have a boot disk and/or more software for a Franklin Ace 1000 and 1200?Thanks in advance.
I'm looking for the pinout's on the LCD monochrome monitor
of my old IBM laptop. It's a 386 PS/2 40Mhz. I wan't to
re-use this monitor for another laptop project, but I can't
manage to sort out how to connect it to a standard VGA port.
can someone help me?
Does anyone have a fully functional Kaypro 10 in good condition (with or without software) they would like to sell? Also, can the Kaypro 10 utilize larger MFM drives (i.e. 20MB or 40MB)?
I have a KENSINGTON Turbo Mouse version 3.0, model #62358. But I don't have the cable to connect to a MacPlus. Would like a phone call if you know how I can solve this? local (West Coast) Matthew 206-343-7576 THANKS
I have a KENSINGTON Turbo Mouse version 3.0, model #62358. But I don't have the cable to connect to a MacPlus. Would like a phone call if you know how I can solve this? local (West Coast) Matthew 206-343-7576 THANKS
I have a KENSINGTON Turbo Mouse version 3.0, model #62358. But I don't have the cable to connect to a MacPlus. Would like a phone call if you know how I can solve this? local (West Coast) Matthew 206-343-7576 THANKS
NEEDED: schematics for TANDY 1400HD power supply (internal switching). I need to get some important files off of the HD, and the power supply blew. The HD is not standard, and I have no other way to access it, other than through the Tandy. If anybody has a working power supply, let me know.
ThAnX in advance,
-Jason
Does anyone know where to obtain a utility to low-level format a 20mb ibm ps/2 hard disk? There is no partition table or boot sector on this drive and I would like to try to salvage it. Thanks in advance to anyone who can help.
Looking for an old Gateway Handbook. I don't care what speed it is, what size the HD is, or how much memory it has. Just as long as it works. I have some IBM computer parts I'd be willing to trade, or If the price is right, I could pay cash (COD) for it.
Thanks in advance,
-Jason
I know this isn't a techie question, but would anyone be interested in:
2 TI 99 4A's
1 plastic cased ( nothing with it, just computer)
1 Silver Cased
Orig. Boxes, manuals, ect.
RF Mod.
Power Supply
10 Carts Some with boxes, all with docs.
Joy Sticks with box, docs
TI tape Recorder with box, docs, all cords, ect.
Beginners Basic book
TI 99 4A game basic program book.
This system works really good and is in very good condition.
Make an offer :) Email for details :)
swolfe1@mail.gcnet.net
I have just installed dos 6.22 on Compaq ProLinea 3/25s but
I can't boot from the harddrive. The computer only returns
LI. So my question is: Do anyone know what can be wrong and
please tell me what LI means.
I have installed dos on a one gigabyte harddrive which the
computer seems to detect allrigt and it has been formated
as a 540 Mb harddrive. It works fine if I boot on a disk.
do u know where i can get a olivetie 510 notepad laptop monitor ribbon
from the base to the pull up monitor as mine has broke
For Sale:
Dauphin DTR-1 Pen-Based Portable
486SLC 25mhz
6mb of RAM
40mb HDD (HP KittyHawk)
2400 Baud FaxModem Internal
10-Base-T Ethernet Adapter Internal
External Floppy Drive
Carrying Case, Manuals and Software
Asking $300.00 or best offer (S/H not included from Phila PA)
Works 100%!
Still selling from various sites on the net for $699.00US
Here's an offline place to start for parts documentation
and other help for Heath/Zenith systems.
Quickdata, Inc.
2618 Penn Circle
Sheboygan, Wi 53081-4250
ORDERS:(414)452-4172
FAX LINE: (414)452-4344
BBS: (414)-452-4345
Also to April's post,
I have an esdi isa controller card
no support for floppy drives though.
I'm looking for an ISA ESDI hard disk controller
I have to sell or trade all the manuals for the plotter HP 7475.
I to trade it for the manual of the 7550 or I sell it $10 CAN.
I am looking for drivers for an IMES 8x IDE CD-ROM Drive. Could I use a standard ATAPI driver, or do i have to have the specific driver. The file name is IMES_CD.SYS.
Any help would be appreciated.
I have an HP125 and am trying to find information on the passthrough protocol
and how to use it to boot the computer over the serial port. If you have info for
an hp120 or hp125 of any of the terminals these were built into drop me a line.
In regards to Russ's post,
Mea Culpa if i stepped on anyones
favorite oem's toes
Most of my experiences with "Big
Blue's" tech support of older systems
has not been favorable
they always seem to give the
runaround and end up charging
more than the part is worth.
but THAT is MY experience..
and yes, most of the vendors are
excellent at tech support
and my hat is off to them.
Willie Rayburn
Shreveport, LA USA - Friday, July 10, 1998 at 11:47:35
Just recieved the stats and documentation for my 386/486 motherboard from DFI!!
.
.
(IBM could take lessons.)
Willie, IBM has materials online, software online and full parts availability for machines way back to pre-msdos machines. They more than do their share of support, and worldwide. It's just a matter of looking or asking when someone that's not familiar with an IBM product needs help. AST research is another that bears a pat on the back for supporting older items, at their cost. There are many others in that category but way too many to mention briefly.
Just recieved the stats and documentation
for my 386/486 motherboard from DFI!!
(yipee, now I won't have to moan about it
anymore) :)
if anybody else has any DFI parts that need
documentation use this source
http://www.dfine.com
use the number to call
have your model number,
serial number,
revision number (letter)
These guys are great!!!!!
It is so refreshing to find a
company that doesn't mind
supporting old products.
(IBM could take lessons.)
Also it would be nice if those
people to whom i responded to their
questions thru e-mail would write back.
FS: KAYPRO 2(s) ù One working machine, with official leather Kaypro case, plus software, plus discs, plus cables. Also a second non-working machine for parts, plus extra keyboard module. Also: three Kaypro-compatible printers: 2 dot-matrix, one large-carriage daisy wheel; with cables. Ribbons, extra wheels, manuals, etc. Asking $150 o/b/o, plus shipping from central Connecticut.
DOS games freeware and shareware for 10 year old download
internet address WANTED.
My grandson Adam has a XT PC which only has DOS and I am
having difficulty finding any shareware or freeware to
download.
Will respond to replies - Thanks in anticipation!!
John.
I need video drivers for OTIVGA800 for Win 95. Where can i find them?
Thanks.
Rodolfo
Three things:
First:
I have just obtained an old 386SX byt Ambra...
The bios is Phoneix V1.01 / W1.2
Can anybody telly me where i can find an update for this, it does not seem to detect my floppy drive.
Second:
Can anybody tell me how I can get a zip drive working in RedHat Linux
Third:
How can I get my Creative Sound 32PnP card working in Linux?
If anybody can help I would be grateful...
Two things:
First:
Two things:
First:
Two things:
First:
Followup:
I found the pricing sheet I had for OpenStep. Prices are as follows:
OpenStep Developer $5000/Developer
OpenStep User $800/User
OpenStep 4.2 (what used to be called NeXTStep, the OS for the NeXT computer) for Mach and Intel is still a commercial product from Apple Computer, Inc (since they bought NeXT).
Supposedly, the guts from OpenStep are being used to product Rhapsody but last I heard it has been shelved indefinately.
To get my NeXT boxes up and running, I bought a copy of this puppy for close to $5K from Apple (I had to have the developer version).
More info is at http://enterprise.apple.com/openstep/
I have an old Compaq Laptop with only 120 Mb disk.
I want to find a 32 bit C-compiler so I can use all the
memory in my computer. I looked at gcc documentation but
it seems very tricky to install with DOS.
Does anyone know of any C-compilers which allow 32 bit exe
files to be written for DOS.
I'm looking for something by Next Computer.....
something called "Next Step" or "Open Step"
for Moc release 4.X for Intell Processors.
If anyone might know where I might find this
product, you help would be greatly appreciated!
Thanks,
Melissa :-)
I have two Toshiba T1000SE notebook computers.
I am looking for Manuals, Service Manuals, and Schematics.
Can anyone help me ?
Cheap to a good home:
Tandy Deskmate manual. I no longer have the program, but the manual is in perfect shape if someone is in need of a replacement one. Just $2.00 plus shipping (apx 1.25) US.
Hey,
I was wondering if anyone either has or would know where to get an 8-bit i/o card with ide hdd, fdd,serial, & parallel. Please e-mail with any info. thanx
I'm looking for a Future Domain SCSI-card type TMC-1660.
Can anybody tell me where I can buy this obsolete adapter ?
Thanks !!
I have a Timex Sinclair 1000 computer, brand new, never out of box. Also have an Epson QX-10 with CPM, MS-DOS, TPM, & Valdocs. Works fine. I have no need for these & would like to sell them. Please e-mail me if anyone interested.
I have just got an Olivetti 86. I would like to know of any software and accessories that there may be for it.
Also, if possible, I would like someone to e-mail the boot-up software, as I don't have a disk.
Thank you
Zenith 420 BIOS
Does anyone know what jumper contact on the motherboard needs to be shorted to dump the BIOS Password? System user has departed and is presently unknown (no records kept). We cannot access PC without a password.
My brother has an old WANG LAPTOP COMPUTER, model WLTC
with BIOS from 1985 - Rev. 0.06.
This machine is defected, the has partially damaged (erased)
EPROM chips with the BIOS. I can't read the contents of this EPROMÆs,
the results of reading on EPROM programmer are partially random.
Can you send me a file with contents of the BIOS EPROMÆs from
this machine model (64 Kbytes or 2 times 32 Kbytes) or memory dump
from address range F000:0000 to F000:FFFF (64 Kbytes).
Thank you very much and I am sorry for my English.
Libor
I have a Mac Plus and an old GC external 60 MB HD. I want to
find a driver that will allow me to connect it to a Performa
running system 7.5.5. I've beem unable to locate General
Computer, the maker of the HD, and believe they've since
passed on to the ash heap of history.
Any suggestions?
Can anyone tell me where I can find software (especially the boot disk) for an Osborne 01 Version 2? I have two of them, but no software. Any suggestions of where to look will be appreciated.
Still waiting on the results of the great 386/486
mainboard info search from DFI.
On a sadder note... I just lost my old 386-40
It won't even post :.(
It's hopelessly dead, let us all mourn it.
It led a full life through many hardware and software
configurations and saw many a chassis.
It has gone to the great tiawanese heaven in the sky.
I shall miss it.
please send your condolences.
If you are looking to buy, sell, or trade new, used, or old computer software and/or hardware, please click on my name to go to my website, where I have listed a bunch of old computer stuff (from 5.25' floppies to CD-roms to monitors to Atari equipment.) I am sorry, but I can't go looking around for specific computer equipment, for people ,unless I were to get paid, so please don't email me asking where you can find something. Laters...
Still looking for an Internal (switching) power supply for a TANDY 1400HD laptop computer.
ThAnX,
-Jason
Ya I Got A Sharp 3040 Notebook Computer (Quite Nice)
And I Called Them Company They Said I Can't Disable The
External Com1(Standard 9pin) & Com2(IR) Ports....
(Want To Put PCMCIA Modem On Standard Port....
And I Am Looking For A Diagram/Instructions Free Of Charge
On How To Build A Working (Possiably Color) PC-TV Adaptor
Useing Standard 15pin Video From A PC As Input And Possiable
Phono/Coax For Output.... Any Ideas? (Greatly Appreciated)
Hope Someone Can Help Me...
Have A G'day Peoplez :)
Hello everybody!
I'm still looking for an INTERTEC SUPERBRAIN in working
condition!
Is there anybody out there who can help me????
Another thing that would interest me are manual/documentations,
or anything else about the HP 9000 model 520.
Please e-mail me.
Thanx a slot!
GATEWAY HANDBOOK 486- Hard drive spins, screen dimly lights up(no text), nothing else. Anybody have any experience with this machine?
Looking for Motherboard info on a Everex model 3000D 386DX20. Serial #PSH 00002952 Code #E-10. INTEL Chip # L9351420
I have an Osborne1 Rev 1.4 and need to know where I can get the CPM and other software on the 5 1/2 inch disks.
I need instructions how to install software onto a BBC
Econet network. Please help !!
Heres the latest news about my odd mainboard.
it IS a DFI board!!!!
contacted the company and hope to get the docs
and specs on it soon
heres some helpful information for you other people
in my situation.
try http://www.ping.be/bios/
this is a bios homepage that can identify your board by
its bios string!
still didn't find my particular board's specs but at least I narrowed it down to the company
company that manufactured the blasted thing!
Hope this information helps somebody and tell me if it does :)
If DFI doesn't deliver, I will be back here to whine somemore
ands ask for help to find my 3486-ucf rev A boards lost specs.
what is the differenceS between hardware and software
of a mainframe and a personal computer (pc)???
Pls help.
Thankx.
I have a DECpc 486xl that I want to try to upgrade. Does
anyone have the jumper settings for this machine? Better yet
does anyone have a used daughter board to upgrade this to
Pentium or even Alpha? I found a brand new one with all the
latest bells and whistles and the price took my breath away!
Even a good used P60 upgrade board would be nice.
Hello!
We have an Apricot 486 XEN-PC, does anybody know the key commands to access the BIOS setup on boot up?
Thanks
I have just aquired a VGA Backlite LCD display. I want to wire the display so that it can run of any video card!
The display will be mounted in a portable box so power is no problem but the wiring harness is the only thing i cant figer out. Any suggestions gladly accepted:)
By the way this site is a great idea!
I wan┤t a program for DOS, WINDOWS 3.11, WINDOWS 95 or LINUX to read commodore 128 formated disks.
I┤ll apreciate your help, programs, faqs, DOCS, etc.
Thanks,
PJMS
I can offer people the following:
IBM PS/2 Model 70 Diags/Setup/Reference Diskette
MFM Hard Drives
Commodore 128 with drive
BBC Master Series with twin floppy drives
Plus lots of information on older hard drives and how to connect two MFM drives together etc.
I need:
Rodime RO202 hard drive from ICL terminal which used to boot ICL Concurrent CP/M-86 v3.x
Power supply (12V) and 20Mb RLL hard drive unit for Toshiba T1200.
MS-DOS v1 and v2 original Disks
MS-Windows 1.0, 2.0, 3.0 installation disks
Any old collectors piece
Pentium 75 Overdrive
Machine with SMD hard drive controller
If you have anything under 'I need' please email me.
I have lots to swap (especially those in the offer section) and money. I will pay shipping etc and pay using Direct Credit.
Jonathan Chote
I am trying to install a generic 33.6 plug and play modem into an Aptiva 310, model 2144-22P. Has anyone successfully upgraded the modem in that model? If so, how can I get Win95 to detect the new modem? Thanks.
I'm looking for the RAM module pinouts for a IBM PS/2
model 70 PC. Can anybody help me with this, or tell me
how to adapt non-IBM 72-pin PS/2 modules for use in
IBM PS/2 mod 70? Thanks!
For Sale 5 1/4 DD Diskettes in cases of 100. Brand new sealed in 10 boxes of 10 ea. $4.50 ea case of 100, $4.00 for postage and $.50 for the disks.
Hi everybody,
I have a strange computer with I dont know anything of it.
Maybe some can help me:
It's a Philips with (in red) "YES" on the front and 2 x 3.5" floppydrives
with serveral connections on the back, left site and on the front.
If I put the power on, it ask for a floppy. Very special is the the keyboard with
can slide into the systemcase.
Does somebody know this system ? I'm looking for the system disk and manual.
If somebody can help me please E-mail me: A.SchaaP@pl.hanze.nl
With regards, Allard Schaap, collector of obsolete computers.
By the way, I frequencely see Question about IBM, here are some very interesting sites:
http://www.pc.ibm.com/cgi-bin/listftp?dir=27&sorttype=date
http://www.gtweb.net/faq.html#1
http://www.adfa.oz.au/Hardware/IBM_Error_Codes/errorcodes.html
http://www.can.ibm.com/helpware/vintage.html
Here you can find anything about it!!
Good luck
I am looking for parts / components for an IBM Thinkpad 500. I specifically need batteries and memory, but I'll look at any other items anyone has available for this notebook.
There have been several posts in this area about Compudyne BIOS upgrades but have not seen any follow-up responses. They may have been private. If anyone has had success upgrading a P75 Bios V2.0 to recognize a 4.3GB hard disk and would like to share what they did, I would really appreciate it ...or ANY help I can get. thanks!!
I am trying to find info on Microstar's 5128 motherboard. The pin outs for the
hookups to the LED's and Speaker and so on. Any help would be graetly appreciated.
Thanks, Ed Cox
This is a Zenith model ZFL-181-93. I got it with some other items that I bought. I don't know anything about. I was told it has two 3 1/2" floppy drives and includes ports for RS232, Printer, RGB/Video, EXT. FDD, and an EXT. BUS which might be a mini SCSI but I'm not sure. The case is set up so that you can add an internal modem. The battery is dead and I don't have the AC adapter so I can't test it.
PLMK anything you can ASAP!!
I have a very curious mainboard in my secondary system.
it can use both 386 and 486dx2 cpu's the model number is 3486-ucf rev A
the board also has a label from Datacomm computer systems
neeed the manual for the board if anyone has something similar please
email or post me a message. I wanna play with the settings on it!!! :)
LOOKING FOR ANY INFO, START-UP DISK, INSTALLATION MANUAL FOR IBM PS/2 MODEL 60. ANY INFO WOULD BE APPRECIATED. TNX
To the woman with the MAC PORTABLE that needs a cord, email me about it.
Also I am looking to buy a Apple LISA.
Thanks for having a great site, and letting us use it.
Hi. I'm looking for jumper settings for a UM82C862F hard
disk controller card. Thanks. James
Hi, I am looking for service manuals, list of common faults & how to correct them for IBM & Compaq Monitiors. I will need information for all models, but in particular the
IBM 8512
IBM 8513
IBM 8514
IBM 9515
Compaq 420
Compaq 420T
Compaq 440
Thanks
Matthew
Hi Has any one got a manual for a Compaq LTE LITE that I can borrow or buy
Thanks
Martin Stevens
I know this has been asked a hundred times, but no answer
was posted. does anyone know where I could get a copy of
Windows 3.0(a)? I've got a 286 that could use it. Thanks,
Frank
I have a 286 bondwell laptop-need cmos settings,please help
I'm always looking for cheep Atari equipment. Willing to pay for it if needed or trade for other stuff I might have laying around.
Tony
For all of you who are looking for harddisk information,
point your browser to:
http://www.microhouse.com
Tons of info there about HD's, controllers, motherboards,
network adapters and the like. They are also the suppliers
of Drivepro. This is a must for all that want to get any
'strange', unknown or unsupported HD's in their system.
Also have a look at : http://www.supportsource.com/hdfind/hd.htm
Cheers to all and thanks for your time,
Peter
I┤m seeking service manuals, or any informative docs about
Bondwell model 8 portable computer.
Thanks in advance,
Vesa
Have Macintosh Portable, but no power supply. Does anyone know what will work with this computer?
I have a Tandy Memory Plus Expansion Board, tandy catalog number 25-1011
that brings the base memory of the machine from 128k up to 640k RAM.
It came from a Tandy 1000 (no suffix) but will work on a Tandy 1000A and
1000HD. Full information documents are contained on line at
http://support.tandy.com/support_accessories/2460.htm
Not sure if your model works with it? Check the docs for your model 1000
at http://support.tandy.com/support_computer/2512.htm
and look under the memory upgrades page to see if it will. I know for
sure it will NOT work on the EX and HX models.
The card is populated with the full 512k RAM to bring your 128K basic
machine up to full DOS RAM.
I need $15 for the card which includes shipping to you in the 48 lower
US states. AK and HI should inquire to see if any additional shipping
applies, probably won't. Email me direct if interested.
Looking for:
Memory for a ZEOS 386+ Laptop
LNW-80 Computer (Model 2 preferred)
Laser 128 Computer or an Apple ][c
Memory & HDD for Nec Versa Laptop (486DX2 50mhz Color)
For Sale:
Apple Newton 100
TRS-80 Model 4p
Atari Portfolio w/Parallel Interface & PC Card Reader Interface.
Nec 386sx 16 Computer
4mb RAM Module for Gateway Colorbook
4mb RAM Module for Apple DUO 230
Mac 512k (System Bd, Case, & Display. No PS Board, FDD, KB or Mouse)
Logitech Scanman Handheld Scanner
Make an offer...
Hi everyone...I'll get back to help a few of you...I've got old info and old programs that are in working order. However, I need help.
I'm looking for a parts compatibility list for an old NOTESTAR 1183 laptop with a 486DX processor and only 4 Meg Ram. I've been trying to use my old MS OFFICE 4.0 on it and really could use some more memory. The manual says you just need to plug in another board, but doesn't say what kind or what will fit.
Any help would be appreciated!!!!!
Network help needed. I'm trying to setup a network with Netware Lite 1.0
and I have now two cards Ge2000III with both bnc- and tp-connectors.
I have five computers (P133, 486dx, 386/25, 286/6 and 8086 PS/2 mod.30)
I have 2 printers (Canon BJC-240, Fujitsu DX2100).
My problem is that I cannot find any suitable Network card for my PS/2.
It is a 8-bit slot where there are no room for longer cards than the ISA-slot.
Can anyone give me suggestions on what cards I should look for (or if anyone have
one they can sell). I also need drivers and instructions for it.
I also need a monitor for the PS/2 that should be as small as possible (6"-9").
Does anyone know how to get into the bios of a Zenith 400+ Series computer?
It's a 486 DX33.
Thanks for you help.
My son just got a CompuAdd 316nx laptop, but it only has 3mb ram. Is anyone familiar with upgrading/adding memory and upgrading hard drive? Anyone have a manual for sale?
Any info appreciated! (Email any info.)
It would be greatly appreciated if somebody could send me the
jumper settings for a Captain 286 memory board.
I have a Toshiba T1200 (laptop) and I would like to know:
a) were there Windows 1.0 1.1 1.3.... 2.0 2.1 etc.
b) if there were does anyone know if my computer would run it
c)does anyone have a copy of Windows that my computer WOULD run?
Thanx,
Todd
Does anybody have a specification (heads, cylinders, capacity etc.) for an IBM WDA-42 Hard Drive?
Many thanks.
Free - You Just Pay the Postage - Free 386SX16 Processor & Motherboard. MB has 'Chips' chipset was made in Taiwan (go figure) VIP-M345000 NPM/16. Anyone want it? I was told it worked when it was given to me. First Come/First Serve. Est Postage will cost $4.00-5.00
I am trying to install an Aztech multimedia card in a Leading Edge 486/25 computer. Does anyone have any suggestions as how to configure it in Windows 3.1? Thanx Angel H
Any info you can send me on slt 286 compaq portable
thanks
I have 2 Commodore 4032 systems in good running condition. Is there any market for these machines as "collectibles" or otherwise?
Thanks
Best place for PS/2 files and info....
http://members.tripod.com/~ps2page/
Lots of links, info, reference disks, etc including links to manuals for desktop, server and portable PS/2's.
I have a memory board for a planar type ZDS machine, came out of a Z248.
This one is the newer type that has four SIMM sockets on it, uses 30 pin
SIMMS. There is no memory installed, just the card itself, works great.
Goes into the special 32 bit type slots like the CPU, IO and other type
memory cards do on planar units.
Not sure how many types of ZDS units this will work in.
Need $15 for it which includes shipping in the 48 conus states.
Will consider trades of equal value cards for ISA, VLB, PCI or even MCA
slots, but please no network cards. Will also trade for one or two
Microsoft InPort mice, without the cards since I have them.
Email for info or if interested
Two of the most common questions I've been seeing pertain
to setup/diagnostic disks for IBM PS/2's and Compaqs.
IBM stuff found here:
http://www.can.ibm.com/helpware/vintage.html
Compaq stuff found here:
http://www.compaq.com/support/out_of_production/
In both cases just follow the links to the model in question
and you will find Setup/Diagnostic disks for that
model.
Stlii looking for a working internal power supply or schematics for a power supply for a TANDY 1400HD laptop computer.
Email me if you have ANY information.
Thanks in advance,
-Jason
Does anyone have a copy of Diagnostic/Setup disk for an IBM
PS/2 Model 50 or where I might find one?
Thanks
Hi Robbo,
I saw your message on the helpline.
Try these:
ALT+CTR+ESC
ALT+CTRL+S (old Phoenix bios)
ALT+CTRL+SHIFT+DEL (!) (Olivetti)
ALT+CTRL+F1
F2 key
F10 key (COMPAQ)
INS key
ESC key
of course DEL key
Some time ago someone dropped this on the helpline
By the way:
I DIN'T GOT ANY RESPONCE FOR MY QUESTION ABOUT
!!!!!!! A SYSTEM- OR DOS-DISK FOR THE HP SERIES 100 MODEL 150 !!!!!!!
THERE MUST BE SOMEONE WHO HAS THEM !!!!!
PLEAS E-MAIL ME
Allard Schaap collector of obsolete computers
I have many items to sale that work on a XT (8086-88) computer.
-MGA, CGA, HERCULES, EGA Display adapter
-Old SEAGATE, MINISCRIBE, MICROSCIENCE hard disk
-Hard disk controller
-Many other things such floppy controller etc
Because of the exchange rate, I sell only in Canada
... got an old 1MB scsi harddisk labelled as
--- digital DSP 3105 ---
now i need information about the jumper settings
e.g. termination on/off scsi-id just everything
any help appreciated
thanx a lot
michael
Mac Plus with US system 6.0.8
I have a Finnish keyboard, but it doesn't get recognized
properly. I don't want the entire system in FI, so how do
get the two languages bolted together?
Anyone ever heard of a Leopard mainboard - If so, any idea on the jumper layout.
It came with an IBM 486 SX CPU.
Thank you.
I'm looking for a new or used(working) Intel Overdrive
Processor for a Pentium P60. I believe the Intel part
numbers are BOXPODP5V133 and/or ODP5V120. Please E-mail
if you have this or know of a supply source. Thanks.
OK all. I recently posted an add trying to get rid of My older computers. I NOW have all of the other ones (ZENITH 286-??, Mac 512k, IBM XT) plus a "Leading Edge " thing (Im tired of messing with them all...) and a gutted Mac Classic. Will trade for 386 Laptop, or anything ekse thqat is useful. they all work, but are in need of repair (New job..no time) none have disks, and I do have about 10 5 1/4 floppy drives, yada yada yada. I guaruntee it all works, but remember, it needs repairs (they will run, some are weird, \the XT boots into BASIC, I dont know how to get ouyt.., and I havent turned on the Leading Edge thing, the 512 needs a new keyboard cable, comes with ext. floppy, 2 keyboards, software. I only have 1 power cable, they were all sold to Me in a bargain box at an auction) ANYWAY.. EMail Me if interested in a trade. Will sell on best offer made in a week.
Thanks,
Gary
I am in need of 1 to 3 Microsoft InPort mice, without the interface cards. Anyone out there get one that they thought might work but didn't get the card with it? have one laying in the desk drawer at work from the machines they yanked and dumped?
I can buy or trade for these, unless "donations" are offered.
Wanted: Jumper settings for a OPTi895-F Motherboard. Trying to upgrade from a 486-66 to a AMD 486-120. I have discovered that the motherboard was manufactured by Holco (shuttle}. The ID# is 40-P3J2-DK1343-00101111-121593-OPTi895-F. Any help would be appreciated. Please E-mail me at jdcarter62@aol.com.
For Sale - AST SixPakPlus Board for older computers circa 1985. It'll give you an additional 640K of memory, an LPT (onboard), comm port (25 pin/included), a joystick port(?) {15 pin/included}, and a real-time clock (for starters). Unfortunately I don't have any manuals but with the help of the many people on this site, you'll be able to either scare up one or find the proper settings. Highest Bid + $3-4.00 for shipping to you via 1st class mail. Love to give this card a new home where it'll be used again.
hello
in the past 2 weeks i have been seeing alot of questions dealing with
nearly new or new computer items. this is an OBSOLETE computer helpline. not a
computer helpline a OBSOLETE, OLD, DUSTY, ANCEINT, whatever you call it, museum.
if you want answers for your new computer questions, go somewhere else and quit wasting space.
thanks.
WANTED:
RAM chips and HardDrive for IBM PS/2 L40 SX laptop computer
Also looking for Power supply for Tandy 1400HD (internal), and various working Tandy laptops.
ThAnX,
-Jason
I've swapped the 486SX25 process for a 486DX250 overdrive in a DECpc 425ST.
It works OK but won't boot without manual intervention because it comes up with
a NMI failsafe timer error. I assume it is confused by the processor now going
twice the speed. There are jumpers on the processor board marked UPGD which may fix
this but I have no manual. Does anyone have a clue which I need to change.
Looking for the DOS disks that came with the Toshiba
T3100 80286 8mhz portable PC. Mainly, I need the
'Test' program mentioned in the User Manual in order
to see if the HDD is ok.
I have a small collection of 10 - 15yr old apricots, xen, xi and various other related bits.
Can anyone help me find a home for these cute computers?
Does anyone know where I can get second hand memory chips
for a Compaq Presario CDS 523 at a cheap price delivered to
Ireland. I would be very grateful for any information or
URLs that anyone could help me with.
Thank You.
Anyone interested in purchasing a Sinclair QL 128k still in
originally box with full manual and all accesories included.
Nice antique for a museum or exhibition. If you want a photo
of it dont hesitate to give me a shout and a email one over
to you.
p.s. Oh there some small problem with the keyboard after I
polished it with Mr.Sheen one day. Thats why it still in the
origianal box I guess.
addition to earlier post today, 2- 5 and 1-4" floppy drives and cables and 1 3.5 floppy from 286 puter. all tested and working. kj
I am looking for a battery for a NoteStar NP-925 Laptop
computer, can you help?
I NEED ALL THE INFO ON THE GRIDCASE 3,THE 1550SX,1535 EPX AND A S S
I have an old HP Portable Vectra CS that my mother would
like to use to write her senior club newsletter, only
problem is, I am lacking the owners/set-up manuals.
(HP part # D1001-90029) Would anyone have this or know where
I can get a copy? HP was no help at all!!!
Here's the perfect addition to the Helpline for those that do computers more than once in a while - the Computer Talk Shop mailing list....
It's easy to subscribe to and free. See the info and instructions at http://www.flash.net/~ecvogel/
This is especially good for questions and answers that are more about newer machines but older ones as well.
2-286 mb 2-hd 40 meg several controller cards, cables.1 165 watt power supply, 1 cga monitor and card , all work and are for sale. 10 -30 dollars american. the whole box 90 dollars american or trade for intel pentium processor 166. no mmx . kj
I recently tried to install a second hard drive, a Maxtor 5.7GB. I thought everything went okay, the bios recognized the partitioned drive and I was able to access it, but I kept getting a bios error on startup. I physically removed the second drive from the pc and the bios but I continue to get the error. I tried loading the bios "Defaults" and still I get the error.
Upon Startup:
Phoenix Bios Development Version 4.05.I
Copyright 1985-1995 Phoenix Technologies Ltd., All Rights Reserved
Copyright 1995 NEC Techologies, Inc. Rev.00.04.03
CPU = Pentium 133MHz
640K System RAM Passed
97280K Extended RAM Passed
256K Cache SRAM Passed
System Bios Shadowed
Video Bios Shadowed
UMB upper limit segment address: F108
System Configuration Date Read Error
Fixed Disk 0: Identified
Press F1 to Resume, F2 to Setup
If I press F1, it boots up okay, otherwise if I go into Bios Setup, no matter what I change I can't get away from the error message when I exit the bios setup and it reboots.
I need jumper sttings for a Western Digital WD90C31 VGA/SVGA card. FCC ID: DBM603527
Hi,
I need the jumper settings to get an Dataexpert board 8661
to work with a Pentium-233MMX
The M/B version is 1.3 so It can work with MMX.
But the crap manual doesn't tell you what jumpers do
bus speed or clock mul. DOh!
Looking for old TANDY laptops - any model. ESPECIALLY a working 1400HD, or power supply (internal) for the 1400HD. I am willing to pay cash or I will trade for an IBM XGA monitor (works - and looks - great). Email for more info.
ThAnX,
-Jason
Hello, I was wondering if someone could send me the
following DOS programs on a 5.25" Floppy/Floppies:
PKUNZIP
INTERSRV & INTERLNK
I have a Compaq Portable III running DOS 3.31 and
Windows 3.0 and need these programs to link the
Compaq to my desktop. Unfortunately, my main
computer doesn't have a 5.25" disk drive and I hope
someone out there will be nice enough to help me
out...
Thank You,
Chris
eman@frontiernet.net
I need jumper settings for my Acer/Aopen model V30 MOTHERBOARD.... unable to find on AOLnetfind or Yahoo... ANY HELP AND PICTURES APPRECIATED!
Hi Everyone,
I hope someone can help me with this problem. I recently
obtained a IBM Thinkpad 750Cs. When I attempt to boot the
computer, I get two beeps frpm the P.O.S.T. system. I
recieve an error code of 5016. Now when i enter the system
diagnostic mode, all the tests return normal results. By
hitting ESC I am able to exit the Diagnostic mode and Win 3.1
will run normally except for the fact that the pointing
device or the mouse do not function even though the drivers
were loaded. Someone mentioned to me that this error code
was erronious and there was a service disk to upgrade the
BIOS. Is there anyone who is familiar with this model or
problem who can offer some advice. I would greatly
appreciate any and all advice in this matter.
Thank You,
Steve
I wan to upgrade memory for Laser Pal 286 Desktop PC. I have no manuals. Which banks do I use? How many SIMMS? 1, 2, 4, 8MB? Do I jump anything? Do I have to remove the original 640K?...Help
I just found a Compaq Portable 386/20. I need documents or
reference on how to toggle between the built-in plasma
display and an external display...like keystrokes!
I am a high school math teacher. I have a few "antique" red LED calculators. TI-SR10 and others. The LED does not function. I would like to attain functionality again. Does anybody know who can repair these relics from the past?
Does anyone have the Kaleidoscope program (ca. 1977)
for the Cromemco Dazzler, in source or object code
form?
(A long shot, I know).
I recently got a "good deal" on a Texas Instruments TI-99 4/A.
It had everything, even the box, and about 15 programs. However,
The RF Modulator's tv jacks had been cut! Is there anyway to get another,
Perhaps Radio Shack Carries them? Or are the parts of the TI 99 4/A
non-standard?
Thanks!
-Matt Jolley
Please help me I am looking for some 386 and slower laptops
including Tandy, 80806, 80808, 286, and 386
Also programs for all of the above
NEEDED!!! Power supply for TANDY 1400HD Laptop, or Complete working 1400HD. The power supply went in mine, and I NEED access to the HD. I am willing to trade an IBM XGA monitor for one.
ANY help is appreciated!!!
ThAnX,
-Jason
I accidentally booted my ms-dos v6.22 Windows 3.1 computer
with a Windows 95 dos v7.0 disk can somebody help me?? I can
run dosj stuff, but when I run the dos shell it says "incorrect
DOS version.....please mail me...!!!!
have an 8088 leading edge computer,have set all settings on motherboard to make it run. all it ever says is: e-fd20-admark error. anyone knows what that is? im going to rip the motherboard out soon and hope you can at least answer that q for me. driving me crazy! thanks!
HI, I HAVE A SCOTT 286 COMPUTER W/ VGA COLOR MONITOR, MSDOS 3.31, 1.44 MEGABYTE, 4 SERIAL PORTS, TURBO PASCAL 5.0, 3-1/2"DISK, CAN THIS SUPPORT WINDOWS AND IF SO HOW? WHERE CAN I GET SOFTWARE FOR THIS SYSTEM? THANKS FOR HELP!!!
Two Quantum Hardcard II XL's for sale. They're 105MB ea. Best Offer! Buyer pays S/H. I was saving them for a 486 DX266 that I was going to put together, but that was months ago.
Also for others having trouble or needing info go to: http://support.quantum.com/menus/arch_menu.htm if anyone needs info or drivers on these or other hardcard products made by Quantum.
That's a MATH Coprocessor....SORRY
Hi all...I have an IBM PS/1 486SX 25Mhz with 12 MB RAM. Great sound, Video,CDRom, and Besta Data 33.6 modem, running Win 95.
My question is does anyone know where i can get the mah coprocessor for it???
I have looked all over and I can't find one....They aren't available for purchase that I could find and am at my wits end with this problem...
PLAESE...I NEED HELP!!
Thank you for any reply that I may get.
I AM SEEKING THE DOCUMENTATION FOR A WANF MEMORY EXPANSION CARD, NUMBER 9453-3. THERE ARE THREE DIP SWITCHES ON BOARD, ALONG WITH THE 8 SIMM SLOTS, AND I WOULD APPRECIATE ANY INSIGHT IN HOW TO SET THIS BOARD UP. IT HAS DISKS CALLING IT A PC 200/300 16-BIT MEMORY CARD, BUT NOTHING ON THE DISKS IS OF ANY HELP.
THANKS IN ADVANCE. MARK CARNEVALE
I'm still selling a Zenith laptop computer for a friend. It's a complete setup. Incls computer, power supply, battery, and origianl Zenith carrying bag.
It is a Zenith ZWL-184-97, 8088 processor, 640K. Has 3.5 720K floppy (read/writes 720k, formats 360K), 20MB HD, 1200 baud internal modem, color LCD screen, ZA-180-85 rapid charge battery, external 9pin video port, RS 232C serial port, LPT printer port, and 25 pin external floppy port. HD has DOS 5.0 and WP5.1 loaded on it. Battery holds a good charge!
He wants $60.00 (obo) + Shipping via U.S. Mail for it; that's what he paid for it at an auction.
Brian
P.S. See what others are asking:
http://wwwipp.unicomp.net/c-reset/lap-port.html (bottom) for a price comparison
I have an old OPTI 82c495 sx 486 MB and I need the jumper settings for it . can anyone help me find a web site to download the settings . Thanx PAT
Free to good home: Intel SnapIn 386 Upgrade Module for IBM AT and PS/2 Models 50 and 60.
That's right, *FREE*. I bought it (cheap) and can't use it. As far as I can tell, It will only work in the above mentioned systems (it requires a PGA processor socket, rather than the standard "clone" 286 socket).
If you can use it, send me a message and we'll work out the details.
I will give special preference to anyone who wants/needs it for use in a system for a charitable organization (in which case, I will also pay shipping costs).
Don't dawdle - I've only got one.
John Lowe
jlowe2.nospam@pacbell.net
Please remove ".nospam" from my address before attempting to send me E-mail.
I have an 386SX-20 processor card. It was manufactured by TSI Inc. circa 1990. It has eight 30 pin memory slots, and
a Com 1 (serial port) and LPT on card, with interface for an extra Com 2 port. The Processor is Intel and it has an open
Math Co-processor socket (I also have some of these). The BIOS is Quadtel (386/SX 011246 OP.2 ) and it has an
Award Keyboard (?) BIOS.
It was pulled (along with other components) from a working system before it was junked.
Best offer takes it. Buyer pays shipping, est $3.00 via U.S. Priority Mail (2-3 days) to your door.
I have an old IBM ps/2 model 70 that boots straight into basic. I want to read my A: and C: drives but I can't get out of the basic program or access the directories from within basic...can anybody help...thanks
i went through some of my stuff, and here is a list of stuff ill let go of,you always pay shipping, or you can pick it up in buffalo ny. the cost of each item is seriously negotiable, but it all worked for me at one time or another. i throw away mics., part general, but retain all my paperwork and softwear, if i ever had it. 1.Macintosh SE/30 just the monitor w/drive 2.Commodore Model 16 3.Commodore Model 128D w/keyboard 4.Commodore Model 1520 Printer 5.Commodore 1531 Datacassette
6.Digital 320 Monitor
7.Digital 420 Monitor 8.EM Pac Tower 386 motherboard, 3&5 inch, no/hd 9.Acerview 11D SVGA Monitor 10.Magnavox Headstart 300, 286CPU, w/5inch 11.COMPAQ Domestic 101 keyboard 12.Panasonic Tape-a-vision NV3120 VTR 13.Chicony E8H57KKB-5160XT keyboard 14.Infinity Model IE14395V Monitor 15.Epson Model MCM4035N-6 Monitor 16.Intigrated Data System Paper Tiger Printer Model 560 17.IBM PCjr w/Color display monitor 18.Zenith Data System ZVM-1220-A monitor 19.Atari 2600 just the box no extras 20.Acer Monitor, no model # on this one 21. Three Texas Instuments computers, all 99 4/A complete, one in black, black missing bottom decorative chrome panel 22.i might not should have listed this here but i saved the best for last, RCA TK_76 CAMERA. This comes with the case even, ex lenses, and tripod. RCA told me that in 1976 this Camera with the tripod i have with it sold for 81,000, go figure. I m open to offers on all or part of this stuff. I got more but this is a start. Dont be affraid to express an interest, even a modest one. I m glad i found this place, it seems to be full of other displaced tinkeres. And i still need a AM amplifier kit or not for my Greymark 505 kit.
If anyone knows how to get into the BIOS of a Compaq LTE 286 Laptop PC, tell me quickly, via Email.
If anyone knows how to get into the BIOS of a Compaq LTE 286 PC, quickly tell me how, via Email.
I rescued an old LTE 286 Laptop PC from a scrap pile at my dad's company building a few days ago. I've been trying to reformat it, and load DOS onto it, but it either cannot read C: or has a problem with its C: drive. I need to know where I can get a reformatting disk, a DOS 5.0 system disk, and how to open the hard drive to see what's wrong with it. I would appreciate it if anyone would help me. This is urgent.
I need to identify a 486dx 7 slot esia, 3 are vesa motherboard, acquired without a CPU, for CPU Type Ref Menu and CPU voltage jumper setting documemtation. It has a 1993AMIBIOS AC0787928 on it and mb says made in Tawiwan with numbers VI15G 93136-4 48.85901.004 on it. I would like to obtain a manual if possible. Thanks in advance for your help.
GriDCase 1520--I need 1MB memory SIPPS if anyone has any for sale. Please email
me with details as I don't check this site every day. Thanks.
Jeff
I need help on dip switch settings on an AEGA card. There are five switches, and I don't know how theey should be set. I have no Instructions.
G'day, I am looking for a circuit diagram for an
AMSTRAD power supply for an AMSTRAD LAPTOP.
The power supply info : AMSTRAD MODEL ANBPSU,
100-240V ~ A.C. 50-60Hz. It's a switch mode psu.
Thank you.
I'm trying to fix a Compaq LTE Lite 4/25C laptop, is there a manual anywhere out there?
I┤m looking for 2 memory modules for the Tandon Laptop LT/386sx
each of 2Mb.
I am looking for 30 pin 4mb Simms.
Is there anyone that can direct me to
finding some cheap?
Hey there - I'm putting together a list of official pacman games and need help in my section on classic computers. I know of versions for the Atari 800, Comodore 64, Vic 20, Apple II, TI 99/4A...but there must be more. Any help is appreciated, thanks, howard (hnager@risd.edu)
I have gotten a Tandy TX 1000 for my sister to learn on and need a setup diskette and any information on same, if any one has some.
Any help would be greatly appreciated.
hi, i have 286 computer w/ ms dos 3.31. can it be upgraded to support windows it has 1.44 megabytes? where can get software?
Looking for any Osborne computers or accessories
Hi!
(Refferring back to my previous post)
I am willing to trade any of the items for sale (except the Toshiba laptop) for working Tandy laptops. I'm looking for any model but the 600 (I have one), and especially the 1400.
ThAnX,
-Jason
I recently purchased an OEM sound card called the Soundconductor 16 PnP, which appears to be based on ESS Technology's ESS1869 chipset..
My supplier is unable to help me with the problems I am haveing. The card
manufacturer is unknown to me although the capital letters C E are printed
on the little folder that came with the card. I installed the card's DOS drivers
and DOS programs respond to them. I get sound in DOS. I installed the Windows 95
drivers and cannot get the card to function in Windows. The Device manager puts
an exclaimation mark in a yellow circle over the ESS Audiodrive Icon. When I click
on Properties in the device manager, the device manager claims the hardware is not working
properly, the card is not installed properly or there are drivers missing. I have quadruple
checked each of the aforementioned items and can find nothing wrong. I have deleted the
device from system manager, removed all drivers from the Windows 95 folder and then restarted the
machine and reinstalled the drivers to no avail. I also repeated the
above process with drivers from ESS Technologies Website. No luck, same symptoms.
I have tried installing the card in different slots also. I have tried some
hardware and software diagnostics on it and they all claim there is something wrong with the card that
they cannot pinpoint. I feel I must be overlooking something but I am unsure what it is. Any
help you can give would be appreciated greatly. E-mail is the best
way to contact me. Thank you!
I have an IBM laptop model 5140, no battery, no power adapter.
What is the voltage specs on the power adapter so I can pick
a compatible one out at Radio Shack?
I remembered a couple of months ago there were several
folks looking for 386sx coprocessors. 2 places I know of
that have them pretty cheap ($5-$15) are:
B.G. Micro Inc. (http://www.bgmicro.com)
and
Computer Recyclers (http://www.comp-recycle.com)
I have bought from both vendors and very pleased
with their service (especially B.G. Micro)
Unfortunately Computer Recyclers sends stuff C.O.D. only
but they do have a wide variety of products.
I have an 80286 and im trying to put a cdrom it i bout an i/o card with an ide interface on it but it just frezzis the computer wene i plug the cd rom into it and if i unplug the cdrom it says the cabel is not pluged in or could be pluged in backwords this i/o card also hase a flopey cuntroller that works fine on the computer i hade to take the old cuntroller out to git it to work if you can help me out e mail me pleas also im running a scsi hd on the computer a soundblaster sound card a 9600 modem a vga monter and card all that stuff works fine thank you if you can help
I am looking for a 80808 laptop or a 286 laptop
And also programs for an 80808
Thank you
HI I AM LOOKING FOR ANY DISKS FOR A TANDY 1000 HX COMPUTER IF ANY ONE COULD SPARE A SET I WOULD APPRECIATE IT. E-MAIL ME AT TIMIK@MAILCITY.COM THANKS MIKE
I have a CTX CMS3436 Multiscan Monitor. It is about 8 years
old and no longer manufactured. I have lost the manual and
have searched everywhere to find one. I can't configure my
system properly without the specs. If anyone can direct me
to where I can obtain the specs for my monitor, I would
greatly appreciate it. Thanks
I found an old Epson Equity II + computer. Can you tell me if it can be upgraded to a working system?
Also I don't have a system disk for it, Do you know where I can get one?
Clearing my basement! Here's a few things that I found in boxes:
EXEREX 386 LAPTOP - Totally torn apart. everything is there - 4 meg RAM 60 AND 80 MB HD, 1.44meg floppy. Only problem (that I know of) is that the LCD was at the bottom of the box, and took the hit when the box fell off the shelf. As far as I know, the external VGA port still works. Make offer.
IBM 14" XGA MONITOR - Works great! needs XGA-2 adapter. Make offer.
HARD DRIVES - Don't know if they work. Email for more info.
TOSHIBA 200CDS LAPTOP - Just refurbished. Email for more info or make offer.
As I was moving boxes, I found I need a few things:
POWER SUPPLY/BATTERY - internal power supply and battery needed for Tandy 1400HD
ANY INFORMATION/PARS - For Compaq SLT 386s/20 - battery, manuals, memory chips, hard drives, and especially SETUP DISKS!!
PRINTER - Battery-operated printer for laptop wanted.
E-mail me for any information on anything mentioned above.
ThAnX,
-Jason
(roblwill@usaor.net)
have some impact printer ribbons, new
nominal charge, to a good home:
Star NX-1000, 4 pieces
Epson #8750, 3 pieces 80 col.
Epson #8755, 2 pieces wide carriage
Olivetti PG-308 laser printer:
Oops, sorry, in my question (b) below, I meant to say
"which RAM chips do I need in order to get 4MB on the
OLIRAM1?"
Mark.
Olivetti PG-308 laser printer:
a. Can anyone loan me a user or service manual for this?
b. I have an OLIRAM1 with 1MB on it, as 32x AMD M5M44256AP -10
chips. Which RAM chips do I need to replace them with?
c. Is it possible to get a PostScript upgrade?
Thank you,
Mark.
Question first: have a Compaq docking station for a laptop marked only as Series 2815 so I have no idea which Compaq laptop it might go to.
Sales pitch: It's for sale...perfect condition, appears to be fully functional. Make me an offer if you think it might work for you by dropping me an email, direct. Trades considered.
I have got a 486dx 66 vl bus pc with a conpaq model 420 monitor.The monitor has a 1" black border around the picture and i cant seem to configure it to fill the whole screen.
it'sa vga card with 2 mg ram, does anyone know what i'm doing wrong.
I have a 386 that I mess around on at night. My dad says that the box for the moniter I am using says it is a RGB moniter. When I run an old game, it says my display is CGA. I got a VGA card and an adapter that makes the 9 pin connector on the moniter into a 15 pin connector which vga moniters have. When I try to run it, I just get a green screen with black lines going through it. Is this going to work at all. Do I need to do something else? Please respond quickly via e-mail. I gotta return stuff if it not gunna work. THX!
anyone know how to get into the bios of a Epson EquityII+ computer
it is a 286 with a seiko epson bios.
I have a Texas 4000 WINSX notebook computer, and I need to know how to get into the BIOS setup. Is there anywhere on the Internet where I can find this information and/or a copy of the computer manual?
As anyone got a manual or jumpering details for a MB4DUVC 486 motherboard? The significant physical features of this board are:
both 30 and 72 pin SIMM sockets.
3 x VL bus sockets.
Appears to have an 'on board' regulator.
Has MANY jumpers around the ZIP socket whose functions are unknown!
Help
Graham
Has
Does anybody have an old laptop (preferably 386DX) that they would like to sell for under $250
i am a student (and tight on cash)
Please email me
I have a clone 80286 12MHTZ IBM compatable and would like to utilize it by upgrading or connecting to my Compaq pressario 2240. Any suggestions? E-me !
GRID 1535 HAS A PROBLEM SEEING A MAXTOR 86 MB HARD DRIVE.
DISK MANAGER SEES IT, SETS IT UP BUT WHEN YOU REBOOT, THE
COMPUTER DOES NOT SEE IT.
GRID 1535 HAS A PROBLEM SEEING A MAXTOR 86 MB HARD DRIVE.
DISK MANAGER SEES IT, SETS IT UP BUT WHEN YOU REBOOT, THE
COMPUTER DOES NOT SEE IT.
This email goes with my last message
I bought a Packard Bell notebook at a garage sale. 386 cpu, 2 mb ram, and no name. Model #PB38620NB-80. The bios is dated 1993. I am trying to find out its name so I can upgrade the ram. Any help would be appreciated. Thanks.
I am looking for the Cirrus Logic IC GD6225-65QC.
This is obsolete controller for a LCD screens.
Could you please send me an information where I can buy this IC in quantity of 1.
My e-mail address is dmitrik@resmed.com.au
I am looking for the Cirrus Logic IC GD6225-65QC.
This is obsolete controller for a LCD screens.
Could you please send me an information where I can buy this IC in quantity of 1.
My e-mail address is dmitrik@resmed.com.au
I have a Dynalogic Hyperion and would like to get a copy of the original documentation and software. Willing to pay small copy fee in addition to shipping.
Thanks,
Allan
Hi again,
Does anyone collect IBM PS/2's? I will very shortly be aquiring aroung 25 PS/2 Model 50z's, that were destined for the crusher. If anyone would like one, please e-mail me. I can't promise anything, but I may be able to give you one. (The company that they are comming from may want them to only go to a school?)
Also, does anybody want some BBC's? Our school has some surplus ones. They would like ú20.00 for a complete system with an MCA (Micro Co
P.S. I am still looking for more Compaq Manuals for all machines. Come on, somebody must have some!
Kind Regards
Matthew Saxby
My friend recently bought a Tandy 1000HX and I need info on it. What its harddrive is (if it has one) and where can I find programs for it. (Games, and Word prossesor(sp) Also, can I put a mouse on it? Is it worth changing motherboards to a newer one? What is the cheapest way to play simple games and type? PLease e-mail me with an answer. I would love any help at all. Thanks
Aaron*
I have and IBM PS/2 model 30 (8086/88) with MCGA video.
Can I upgrade to EGA or VGA? What hardware & drivers are needed.
Thanks in advance
I have an AST Advantage 486/SX33 that needs a BIOS upgrade to run window 95/98 must have a late 95 date. Am willing to pay resonable price. Thanks.
Have old IBM L40SX. Love huge keyboard, want to upgrade
memory and processor.
Also if anyone would like a copy of DOS 3.x I have about 10 or 15 copies of it for sale for $5 for 1 copies, $5 for 2 copies if u pay the $10 shipping and handling charge. If u want more than 2 copies email me and we can figure a price. Buyers pay $5 shipping and handling per copy, less if u buy more than 2 copies to anywhere in the 48 states. No out of country orders please. This is first come first serve. I will respond to the emails in the order that they appear in my box. I also have plenty of IBM PS/2 Setup Disks and Installation manuals for sale also. $2 per copy and $2 S&H All merchandise is unopened.
Thanx in advance
Casper
Thanx
Casper
Also if anyone would like a copy of DOS 3.x I have about 10 or 15 copies of it for sale for $5 for 1 copies, $5 for 2 copies if u pay the $10 shipping and handling charge. If u want more than 2 copies email me and we can figure a price. Buyers pay $5 shipping and handling per copy, less if u buy more than 2 copies to anywhere in the 48 states. No out of country orders please. This is first come first serve. I will respond to the emails in the order that they appear in my box. I also have plenty of IBM PS/2 Setup Disks and Installation manuals for sale also. $2 per copy and $2 S&H
Thanx in advance
Casper
Thanx
Casper
I have two old IBM 4019 laser printers and I would really like to upgrade the RAM on it. They keep locking up the systems they are on if we try to print any complex graphics. Any ideas where I could find someone who still sell the appropriate memory upgrade?
I have Compaq SLT/286 notebook computer from 1987 or 89 and I need a new battery and I want a docking station or expansion or whatever you want to call it. I am also looking for memory chips and/or anything else that will work with this model notebook. I am extremely interested in finding any item related to the Compaq SLT/286. Please if you know of anyone who has any of the above items, tell them to contact me. I am willing to pay money for the items. I am desparately searching for these items.
My email is pb4ugoout@aol.com and I check it every day. Will try and respond to all mails concerning this matter.
Thanx
Casper
My compay is looking for a Copy of Lotus123 r2.1 to Purchase.
Please e-mail me if you can help with this.
Anyone know where I can buy a 16Mb upgrade module for an IBM Ambra Laptop computer in the UK ??
The model number is a SN8660
Thanks.
Andy
Recently found a Compaq CDS 633 in the back of the closet.. trying to find info as to what type RAM it uses, can I hook up two hard drives? Anything I can do to upgrade the bios? Thanks for any help
I am looking for documentation for an Epson HX-20 computer (programming manual, technical documentation....). I have one in excellent condition (almost unused) and I want to use it for data acquisition.
Thanks!
I am trying to make one of my XT's into a power-house machine (ha,ha) and while flipping through the June 1991 edition of PC Computing (p.251) I came across mention of some items I have an interest in acquiring. They are the following...
1. Intel's Inboard 386/PC with 1 mb onboard memory [1991 price = $750.00]
2. Intel's memory daughtercard (gives 2mb additional memory) [1991 price = $495.00]
3. Inboard version of Windows 3.0. [1991 price = $89.00]
I am interested in any info on these items.
If someone has some or all of them and wants to sell/trade let me know (obviosly I don't expect to pay 1991 prices :-) )
I am trying to make one of my XT's into a power-house machine (ha,ha) and while flipping through the June 1991 edition of PC Computing (p.251) I came across mention of some items I have an interest in acquiring. They are the following...
1. Intel's Inboard 386/PC with 1 mb onboard memory [1991 price = $750.00]
2. Intel's memory daughtercard (gives 2mb additional memory) [1991 price = $495.00]
3. Inboard version of Windows 3.0. [1991 price = $89.00]
I am interested in any info on these items.
If someone has some or all of them and wants to sell/trade let me know (obviosly I don't expect to pay 1991 prices :-) )
I have a NEC Pro Speed 286. It has one com port and a modem is attached to this port. How can I disable the modem so I can use a mouse with the computer.
I have several hardcards. They have a Seagate st07a/08a controller which I have the jumper information on it. It uses a Quantum EZ 127 hard drive.
Does anyone have the software to initialize it? or other information about it.
I would be interested in a different hard card as a replacement.
The power supply on my rainbow 100 computer finally failed.
I have many floppys containing data I wish to recover.
IBM compatible computers cannot read these discs. Any
suggestions as to how I can recover these data?
i have an old 386 amstrad how much is it worth
Is there a way of tricking Netscape or internet explorer to send non DOS, Non Basic stuff as attatchments?
My machine won't load for attatchment , what it cannot read, and make sense out of I am not sure that PK will Zip and unzip the files either. I have had that problem every time I have tried to E-mail
a propriatory operating system to some body who could use it. Please post the solution here so we all can use it
Is there a way of tricking Netscape or internet explorer to send non DOS, Non Basic stuff as attatchments?
My machine won't load for attatchment , what it cannot read, and make sense out of I am not sure that PK will Zip and unzip the files either. I have had that problem every time I have tried to E-mail
a propriatory operating system to some body who could use it. Please post the solution here so we all can use it
I need drivers for an nsa ncd-2x cdrom and drivers for a lava computers 1mb memory board from an epson equity 286. I would like to have win 3.1 drivers if possible. Can anyone help me??
Need Parts for:
Epson LT-386 SX
model T96652U
Product Number AO25100
Serial 2470001566
Woul like OEM RAM card, modem/phone card and access to larger than 40 megabyte hard drive.
Whoops, the jumpers originally were on...
OP and
D1
sorry about the typo
I am trying to upgrade an IBM XT with a 3.5" floppy drive. There was just a 5.25" A: drive and a 80meg hard drive before. I have the power cable and drive cable hooked up but cannot access the drive. I assume it has something to do with jumpers but I don't know much about them. The jumpers on the 3.5" drive are as follows...
(each line is a jumper)
HHO
OP
LHI
HHI
D1
D0
FG
When I took if from the 386 it was in there was a jumper on...
HH0 and
D1
(It was the only floppy in the 386)
I have a Notestar NP-925 laptop.I am looking for a modem for this,that is factory.speed is not important.I was told the part number is FXM-900 please help.
I have a number of files written in Word Perfect 5.0 on a
Toshiba 1600 which are coded with a password. I have lost
the program files and now I need my documents! So, does
anyone have WordPerfect 5.0? If you do, send it to me,
please! Or if you know any alternative way to decode my
files, please tell me. I may sound strange, but it is
actually pretty urgent.
My future lies in Your hands.
Hello, I am trying to get a Compaq Deskpro 386s to work with the tape drive that was originaly bundled with the system. I am in need of the windows/dos software to enable it. The tape drive is in perfect working order, but it's a bit useless without any software. Also thank you to all the people who responded to my post about old Compaq Manuals. I still need a few more, so please contact me!
Kind Regards
Matthew Saxby
Hi there again,
Here a question to everybody who know the HP series 100 model 150.
I'm looking for the referece or diagnostic disk and Dos.
I want to see that old one running!!
Please E-mail me for my adres.
With great regards from Holland
Allard
I have many items to sale that work on a XT (8086-88) computer.
-MGA, CGA, HERCULES, EGA Display adapter
-Old SEAGATE, MINISCRIBE, MICROSCIENCE MFM hard disk
-Hard disk controller for MFM
-Many other things such floppy controller etc
Because of the exchange rate, I sell only in Canada
My original post missed the URL for my PC Hdwe page.
http://www.randomc.com/~dperr/pc_hdwe.htm
Mfg URL lists, driver pages, "legacy" product info, links
to tech supt pages and repair vendors and much more.
Not a "one stop shop" but pretty close.
I have just been given a MicroVax 3100, its old dusty, a bit scary looking and came with a DAT Drive and A funny looking Disk Drive (Square Block taking disks that are the same size as bix of 10 1.44 floppys)
My Question is, how do i access the disk drives from the vax?
i want to format it and and reinstall VMS v6.0
As much info as possible please, i will be very grateful
I RECENTLY PURCHASED AN OLDER MODEL
PERSONAL COMPUTER[LAPTOP].IT IS LABLED AS A
PANASONIC MODEL CF-380H6.IT ALSO SAYS IT WAS MADE IN JAPAN BY MATSUSHITA ELECTRIC INDUSTRIAL CO.,LTD.I THINK IT MAY BE ABOUT 1992
VINTAGE.AS I DID NOT GET ANY MANUAL OR INFORMATION ON THE UNIT WHEN I PURCHASED IT,I WOULD APPRECIATE ANY INFORMATION ON THIS
MODEL.THANKS!
found this service searching for information on a recently
purchased older personal computer[laptop].looks like a very useful service!
In need of a motherboard for a Tandy 3800HD Laptop, or possibly a complete unit which has a good motherboard on.
If anyone knows where I can look to find one let me know.
Thanks much!
I recently got a hold of a sharp PC4501 laptop. It seems to work but I need the system disks for it.
They are 3.5 floppys. If someone has them please contact me. The machine was built according to the screen in
1986-87. I also need any manuals on same. Thanks to any help I can get.
I am looking for the jumper settings for a Microstar4136 motherboard withonboard vga can anyone help?
EPSON PX-8 for sale
We found an EPSON PX-8 in the basement during a cleanup,
and I thought it might be worth something to someone. I have not
tried to start it up, since I don't have the power adapter for it.
There is also some shrink-wrapped documentation available.
Ask me questions and I will take a second look at it.
Any idea how many of these were sold back in the mid 80's?
I was given an old computer with an Everex EV-943 modem.
What baud rate is this? Also, two dip switches on back side
what are they for? Thanks
Archived Questions:
Scripts and Guestbook created by Matt Wright and can be found at Matt's Script Archive