Comtrol Logo

 Active Products
 DeviceMaster FreeWire
 DeviceMaster LT
 DeviceMaster PRO/RTS/Serial Hub
 DeviceMaster UP
 DeviceMaster 500
 RocketLinx
 RocketModem IV
 RocketPort EXPRESS
 RocketPort EXPRESS SMPTE
 RocketPort INFINITY
 RocketPort Universal PCI
 RocketPort uPCI Plus
 RocketPort uPCI SMPTE
 RocketPort uPCI 422
 RocketPort 550 uPCI
 RocketPort USB Serial Hub II & III
 Troubleshooting
 Comtrol .iso Files
 Beta Files
 DeviceMaster UP
 IO-Link Master
 EtherNet/IP
 Installation 4-EIP
 Rotary Switch
 Mounting/Installation
 Connecting to the Network
 Connecting the Power
 Setting the IP Address
 Configuring Ports
+Connecting IO-Link Devices
 PortVision DX
 Software
 Documentation
 Troubleshooting
 RocketPort 550 Universal PCI
 Obsolete/Legacy Files
 Warranty
 FTP Administrator - Report Issues

IO-Link MasterConnecting Devices

You can use the IO-Link Master 4-EIP User Guide or the following information to connection IO-Link devices to the IO-Link Master.

The IO-Link Master provides four IO-Link ports with M12 connectors (5-pin female/A coded).

[Note]
Note

Make sure that you tighten the cables properly to maintain IP67 capablities.

This table provides signal information for the IO-Link connectors.

PinSignalDescription

1

L+

Power supply (+)

2

DI

Digital input

3

L-

Power supply (-)

4

C/Q

Communication signal, which supports SDCI (IO-Link) or SIO (standard input/output)

5

N/A

Not Connected

This table provides information that you may need regarding the IO-Link connectors.

Current and Power Value

Maximum IO-Link Supply

200mA

Maximum C/Q Current:

High: 200mA

Low: 200mA

Peak C/Q Current:

High: 500mA

Low: 500mA

C/Q and DI Input

Maximum: Power Input +0.5VDC

Minimum: -0.5VDC

SDCI (IO-Link) Transmission Rates:

COM1: 4.8Kbps

COM2: 38.4Kbps

COM3: 230.4Kbps

[Note]
Note

IO-Link ports must have an approved cable or protective cover attached to the port guarantee IP67 compliance
nice color
06/11/14Home | Comtrol Support 
Copyright © 2014 Comtrol Corporation.