Beta Files

Use this table to access the latest DeviceMaster beta firmware for your protocol.

Name	Files	Description
EtherNet/IP firmware	V4.11	You must use PortVision Plus before configuring the serial ports. Refer to the EtherNet/IP User Guide for detailed information and the EtherNet/IP Interface Configuration Quick Start for configuration procedures.
Modbus Router	V6.06	You must upload Modbus Router firmware on the DeviceMaster UP using PortVision DX v3.03 or higher before configuring the serial ports. You may want to download the Modbus Router User Guide. You may want to also download the appropriate installation and configuration for your model.
PortVision DX	v3.03	PortVision DX replaces PortVision Plus. PortVision DX is required to upload the latest firmware versions.
Modbus Router User Guide	Rev D	The Modbus Router User Guide provides detailed information about Modbus Router firmware v6.06.
DeviceMaster UP Hardware Installation and Configuration Guide 1/2/4-Port Only	Rev J	This guide contains the latest information about installing and configuring the DeviceMaster UP using PortVision DX.
DeviceMaster UP 16-Port Hardware User Guide 16-Port Only	Rev A	This guide contains the latest information about installing and configuring the DeviceMaster UP 16-port using PortVision DX.

Note
Files labeled Beta means that the product is a current product, but the download files are still in the development process. Please consult with Technical Support before using BETA drivers/software in a production environment. These downloads are fully supported by Comtrol except in production installations.

	06/11/14	Home \| Comtrol Support
	Copyright © 2014 Comtrol Corporation.