Click the Beta button to check for a beta version of the file. This is the location for the files before the product has been officially released.

The Check for Latest File button links to the file location after the product has been officially released.

Please note that at the time this CD was manufactured, the product has not been officially released.

Image

Version

Description

U-Boot Bootloader

v1.01

U-Boot is a high-level bootloader that has networking and console command line capabilities. Among other things, it implements a TFTP server and Comtrol Corporation's new discovery protocol. This verifies that a Linux kernel image exists in NAND, then copies it to RAM and starts the IO-Link Master The U-Boot version is displayed after the image name.

FPGA

v1.00

The FPGA partition/image contains configuration data used by programmable hardware within the IO-Link Master.

System Primary/Backup uImage

v1.00

The uImage contains the Linux kernel and the RAM-resident root file system. It does not contain industrial protocol support or application-specific features.

There is a Primary and Backup version loaded on the IO-Link Master. The IO-Link Master automatically reloads the Backup uImage if the file system corrupted. The uImage version is displayed after the Primary/Backup uImage.

Application Base

v1.2.0

The Application Base image comprises a flash-resident file system containing application and protocol support.

The Application Base is built from a collection of application subassemblies -- each of which may be updated individually between releases of the application base as a whole. The Application Base assembly has a 2-tuple version number, which discussed in the note below.

This table contains the individual Application Subassemblies that make up the Application Base image. There may be an application that is not available in the latest Application Base image in the table above. If that is the case, there will be an image and version available in the VERSION column.

Application Subassembly

Version

Description

Application-Manager

v1.2.0.0

This application subassembly is integrated into the Application Base image. The latest version of the Application Manager may not have released in the latest Application Base image.

Configuration-Manager

v1.2.0.0

This application subassembly is integrated into the Application Base image. The latest version of the Configuration Manager may not have released in the latest Application Base image.

Discovery-Protocol

v1.2.0.0

This application subassembly is integrated into the Application Base image. The latest version of the Discovery Protocol may not have released in the latest Application Base image.

EtherNet/IP

v1.2.0.0

This application subassembly is integrated into the Application Base image. The latest version of EtherNet/IP may not have released in the latest Application Base image.

Event-Log

v1.2.0.0

This application subassembly is integrated into the Application Base image. The latest version of the Event Log may not have released in the latest Application Base image.

IO-Link Driver

v1.2.0.0

This application subassembly is integrated into the Application Base image. The latest version of the IO-Link driver may not have released in the latest Application Base image.

Web User Interface

v1.2.0.0

This application subassembly is integrated into the Application Base image. The latest version of the Web User Interface may not have released in the latest Application Base image.

Note

Application subassemblies have 3-tuple or 4-tuple version numbers (for example, 1.10.1). The first two values in a subassembly version correspond to the version of the application base assembly for which it was built and tested.

For example, a subassembly with version 1.10.3 was tested with application base version 1.10. When using this page or PortVision DX, an application subassembly can install only if its version number matches that of the installed application base assembly. A subassembly with a version of 1.20.2.4 only installs if the application base version is 1.20. It will not install on a, IO-Link Master with application base version 1.09 or 1.20.

	06/11/14	Home \| Comtrol Support
	Copyright © 2014 Comtrol Corporation.