![]() | ![]() |
|
![]() |
|
Enable the features that you want to use.
![]() |
|
If desired, click the Clone check box to set all of the ports on this DeviceMaster to these characteristics.
If desired, select a different COM Name (NS-Link COM port number). The drop-down list displays (in use) next to COM port numbers that are already in use in this system. Do not duplicate COM port numbers as this will cause the ports to not function.
Highlight the next port that you want to configure and perform Steps 3 through 9.
You are now ready to attach your serial device. If necessary, refer to the DeviceMaster Installation and Configuration Guide.
If you want secure COM ports, you must Enable Secure Data Mode in the NS-Link web page.
Optionally, configure socket mode.
![]() |
![]() | 06/11/14 | Home | Comtrol Support | ![]() | |
![]() | Copyright © 2014 Comtrol Corporation. | ![]() |