home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.wwiv.com
/
ftp.wwiv.com.zip
/
ftp.wwiv.com
/
pub
/
BBS
/
BCNUK080.ZIP
/
NUKE.DOC
< prev
next >
Wrap
Text File
|
1994-12-25
|
12KB
|
267 lines
▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
─────────═════════φ PCB 15.2+ Nuke PPE φ══════════──────────
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
(C) BlackCat,
Version 0.80ß
────────────────────────────────────────────────────────────────────
Yes, here I am again with yet another nuker. Emphasis has been put
on speed in this nuker. Depending on the feedback I get for this
version I will decide whether or not to put some more work into it.
This nuker took more of my time then the usual PPE, so I'd appreciate
a small donation if you decide to use this.
Note: the PPEs in this distribution will only run on pcboard 15.2 and
above!
────────────────────────────────────────────────────────────────────
──────────═════════φ Files φ══════════────────────
────────────────────────────────────────────────────────────────────
The following files should be included in the distribution:
HELP\*.* - Help files subdir.
WORK - Temporary directory, must exist.
graph\text - All miscellaneus nuker text can be found here.
graph\award.msg - Award message written to DIR (contains macros)
graph\comment.msg- Comment message written to DIR (contains macros)
graph\nuke.msg - Nuke message written to DIR (contains macros)
graph\free.msg - Free message written to DIR (contains macros)
graph\cmthdr - Header when showing comment selection menu.
graph\cmtftr - Footer when showing comment selection menu.
graph\delmenu - Menu shown when selecing to move/zerobyte/delete a
file
graph\deschdr - Header when showing a description.
graph\menu - Main menu.
graph\tophdr - Top nuked bulletin header.
graph\topftr - Top nuked bulletin footer.
graph\msgaward - Message sent to a user when awarding (contains
macros)
graph\msgnuke - Message sent to a user when nuking (contains macros)
graph\tbnuke - Message sent to a user when turbo nuking (contains
macros)
graph\tbaward - Message sent to a user when turbo awarding (contains
macros)
graph\turbomsg - Warning message displayed when turbo nuking.
graph\credhdr - Header shown when asking the credit factor to
nuke/add.
graph\noaxx - File shown when a user has no nuke access.
graph\owncmt - File shown when entering your own comment.
comment.cmt - Comment lines configuration file when commenting.
nuke.cmt - Comment lines configuration file when nuking.
award.cmt - Comment lines configuration file when awarding
findnuke.exe - FindNuke used by main.ppe.
flag.ppe - Normal flag.ppe (3.0 and above) replacement.
flag.pps
flagbar - Lame example flagbar to be copied to your flag dir.
flagnuke.cfg - Nuke cfg file to be copied to your flag dir.
flagv.ppe - Flag replacement to be used if you're using my
viewer.
flagv.pps
lb.cfg - Main menu lightbar configuration file.
main.ppe - This PPE does just about all the work.
nuke.cfg - Main configuration file.
nuke.doc - This doc file.
nuke.his - Program history.
nuke.ppe - This PPE should be used to start the nuker.
pwanuke.ppe - PPE to be used with Drew's Flag PPE (PWA).
pwanuke.pps
replace.exe - Nuke Replace, used by main.ppe.
search.exe - Nuke Search, used by main.ppe.
top.cfg - Top nuked bulletin configuration file
top.exe - Top nuked bulletin creator.
users.cfg - Nuke access configuration file (only used if setup
throuh nuke.cfg).
────────────────────────────────────────────────────────────────────
──────────═════════φ Installation φ══════════────────────
────────────────────────────────────────────────────────────────────
Here are the installation instructions. If you follow these
carefully you shouldn't have any problems installing the nuker.
As most of the other nukers I've seen this nuker also uses a
modified version of the commonly used flag.ppe.
1 - Overwrite your original FLAG.PPE with the nuker version. The
source code is supplied so you can mod FLAG.PPS yourself if you
have it setup with other patches/mods and compile it.
The patched version of FLAG.PPE for use with my file viewer (in
case you use that) is supplied as FLAGV.PPE/FLAGV.PPS.
Make sure you also edit FLAGBAR to mention the nuke command
(or copy the supplied FLAGBAR to the flag PPE directory)
If you use PWA's flag from DREW you can copy PWANUKE.PPE to the
EFLAG directiroy and install it as an external NUKE command in
EFLAG.CFG. Make sure you also install FLAGNUKE.CFG as described
next.
If you use Drew's flag v2.0 (or higher) copy BCNUKE.PPE instead of
PWANUKE.PPE and edit BCFLAG.CFG in the flag directory to contain
the nuker path, instead of FLAGNUKE.CFG, as described in step 2.
2 - Copy FLAGNUKE.CFG to the same directory as your FLAG.PPE, the
first line in this file should contain the path of the nuker.
i.e. d:\pcb\nuker
----------------
Okay, now to the nuker config part:
Edit NUKE.CFG and make sure everything corresponds to your
setup. You'll probably have the most difficulty with the UPLOADED
BY setup, since most of you have the 'Uploaded by' string as the
last line in your description I suggest using 'B' (look from the
bottom up), just make sure the coordinates of the start and length of
the user name in the uploaded by line you give are correct (check
them in your dir files).
Another thing you might want to change from the default
setup is the ULBY path, if you don't use ULBY enter a 'N' in the
first line.
After this go into PCBSETUP, Press 'B' twice and press 'F2' over edit
CMD.LST. You should now enter something similar to the line below
depending on your setup.
Command Sec PPE/Mnu.......
====== === ================
1) NUKE 100 D:\PCB\NUKER\NUKE.PPE
| | |
| |
| | Full path of nuker
|
| Security level
Command to use nuker
────────────────────────────────────────────────────────────────────
──────────═════════φ Nuking φ══════════────────────
────────────────────────────────────────────────────────────────────
Right on to the good bit. NUKING!!!!!
When doing a file list or similar instead of pressing to spacebar to
flag a file press 'N'. You will then see file FILE TARGETTED FOR
NUKING at the bottom of the screen. Do this for all the files that
need nuking. When on the main menu type NUKE or whatever you decided
to call it in the cmd.lst file.
Note that the flagged files are conference specific, ie. the Nuker
creates a different batch file for each conference so that you do
not accidently try to nuke files in the wrong conference.
Another manner to quickly nuke a file or a bunch of related files
is by using the 'WildCard' option of the nuker. Just enter the
wildcard to match the files you want to process (eg. bc*.zip) and
start nuking/awarding!
I'll quickly go trough the options you see at the main menu:
Normal Process -
This options starts processing the files in the current batch.
You can NUKE/AWARD/FREE/COMMENT files. When nuking/awarding
NUKE.PPE will leave them a message with why it was done. You can
pick the reasons included or add your own. You will also be
asked by how many factors to NUKE/AWARD by (ie. 2 = 2X credits
added or deleted.
The PPE itself contains help options, so I won't go any further
into it here.
Turbo Process -
This is the same as normal processing, except that
the values you enter for the first file in the batch are
automatically used for the rest of the files in the batch.
NOTE: it is your resposibility to make sure that all the
files belong to the same user as the nuker only verifies this
for the first file, and assumes the rest of the files in
the batch belong to the same user!!!
WildCard Process -
This asks you for a wildcard entry which is used to find
files for processing. You can add the found files to your
current batch or turbo process the found files without loosing
your current batch.
Zippy flag files - Same as 'Z'ippy search for files....
Locate file name - 'L'ocate file name to nuke.....
Scan - 'S'can the upload dir for new files as you would
normally with the N command.....
Delete batch list - Delete the list for nuking, ie start again...
(note: only the batch of the current conference
will be deleted of course)
Edit batch list - Add or delete some of the files targetted for
nuking in the current conference.
It really is very straightforward, any probs. just let me know, but
there shouldn't be.
────────────────────────────────────────────────────────────────────
──────────═════════φ Greetings φ══════════────────────
────────────────────────────────────────────────────────────────────
Greetings go out to:
Satans Fire : thanks for the great diz !!
Drew : for your comments on how to improve things
Rigor Mortis: you're doing great things for WN, hope you can keep it
up!
Mr. Menor : love your chats and keep up the GREAT work with WN
(and try paying your bills on time, you scared the hell
out of me :).
Animal : for testing the nuker and writing parts of these docs to
relieve the tension on my fingers a bit..
Like Kata : for testing and helping me out..
Il padrino : for never answering my pages :-)
B.o.B : Hmmm, what happened to you, haven't seen you around
lately.
And everyone else I forgot!
Furthermore I'd like to thank the authors of all the other nukers
around from which I got the inspiration to make this! The nice
skull pictures were taken from the THT nuker by The Master, hope
you don't mind dudes, it was all done in good spirit!!
────────────────────────────────────────────────────────────────────
──────────═════════φ Disclaimer φ══════════────────────
────────────────────────────────────────────────────────────────────
This software and manual are supplied "AS IS". The author hereby
disclaims all warranties relating to this software and its
documentation file, express or implied, including but not limited
to damage to hardware, software and/or data from use of this
product. In no event will the author of this software be liable
to you or any other party for any damages. Your use of this
software indicates that you have read and agree to these and
other terms included in this documentation file.
────────────────────────────────────────────────────────────────────
──────────═════════φ Author φ══════════────────────
────────────────────────────────────────────────────────────────────
You can contact me at Nosferatu +31-365367077, just page me from
the matrix if it concerns PPEs or leave feedback if I'm not there.
If you're on internet you can also mail me at an42144@anon.penet.fi.