home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.os.os2.misc
- Path: sparky!uunet!cs.utexas.edu!uwm.edu!linac!pacific.mps.ohio-state.edu!cis.ohio-state.edu!magnus.acs.ohio-state.edu!usenet.ins.cwru.edu!eagle!lims01.lerc.nasa.gov!scdorcy
- From: scdorcy@lims01.lerc.nasa.gov (JAMES DORCEY)
- Subject: Re: Service Pak readme
- Message-ID: <5NOV199209172071@lims01.lerc.nasa.gov>
- News-Software: VAX/VMS VNEWS 1.41
- Sender: news@eagle.lerc.nasa.gov
- Nntp-Posting-Host: lims01.lerc.nasa.gov
- Organization: NASA Lewis Research Center
- References: <6kRkTB1w165w@cybernet.cse.fau.edu> <1992Nov4.110026.27@dcs.simpact.com> <1992Nov5.054218.1090@ncsu.edu>
- Date: 5 Nov 1992 09:17 EST
- Lines: 17
-
- In article <1992Nov5.054218.1090@ncsu.edu>, stephen@ncsu.edu writes...
- >
- >Obviously, you did not read the whole thing. The next sentence clearly states
- >that the WELCOME folder is only on preinstalled systems, if you have installed
- >it yourself, you must type dspinstl from the OS/2 command prompt. If people
- >don't read it themselves, maybe I'll just post that part of the README file...
-
- This is the second time that I have read that the README file for the
- installed CSD states to run DSPINSTL from the OS/2 prompt, which ain't what
- my README says (mine says to run selective install once you get past the
- part about the WELCOME folder). Are there two different variants of the
- README file running around (mine is from the 5-1/4" Service Pack/CSD)?
-
- The selective install method worked fine for me (640x480x256 on a Diamond
- SpeedStar).
-
- JD
-