home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.dcom.modems:16523 comp.dcom.fax:2066 comp.sys.mac.comm:10730
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!wupost!wuarchive.wustl.edu!hp48sx
- From: hp48sx@wupost.wustl.edu (HP48SX Archive Maintainer)
- Newsgroups: comp.dcom.modems,comp.dcom.fax,comp.sys.mac.comm
- Subject: Fax modem questions
- Date: 7 Nov 1992 18:35:38 -0600
- Organization: Washington University in Saint Louis, MO USA
- Lines: 23
- Message-ID: <hp48sx.721182588@wuarchive.wustl.edu>
- NNTP-Posting-Host: wuarchive.wustl.edu
-
- I am going to do some hacking on my Supra FAXModem V.32bis, but
- unfortunately the fax AT commands is not listed in the manual anywhere.
- So if somebody could please tell me where to find them, and where to
- find the format of incoming/outgoing faxes.
-
- My problem is, I have a Mac with FAXstf, the Supra V.32bis, and a phone
- + answering machine. I would like this combination to let the answering
- machine (connected to the phone outtlet on the modem) answer all calls,
- and if either a carrier or a fax CNG is detected then disconnect the
- phone/answering machine, and let my program handle things.
-
- Is it possible to do this ? That is listen on the line without answering
- ? Can I do it with Rings to AutoAnswer set to 200 ? or how is it done ?
-
- thanks in advance,
- Povl H. Pedersen.
-
- I live in europe, so no US BBS please. ftp sites, or direct mail is OK.
- --
- Povl H. Pedersen hp48sx@wuarchive.wustl.edu
- HP48sx archive maintainer
-
- All Opinions (C) Copyright the Intergalactic Thought Association
-