home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!usc!zaphod.mps.ohio-state.edu!cis.ohio-state.edu!rutgers!cbmvax!cbmehq!cbmger!edomdo!manfred
- From: manfred@edomdo.UUCP (Manfred Dolag)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Zorro <> CAMAC Bus interface needed
- Message-ID: <manfred.01jp@edomdo.UUCP>
- Date: 7 Sep 92 19:01:46 GMT
- References: <13490@swrinde.nde.swri.edu> <1992Sep4.094020.5498@mpifr-bonn.mpg.de> <13511@swrinde.nde.swri.edu> <1992Sep4.235204.18776@mpifr-bonn.mpg.de>
- Organization: Edotronik GmbH
- Lines: 32
-
- In article <1992Sep4.235204.18776@mpifr-bonn.mpg.de> mlelstv@speckled.mpifr-bonn.mpg.de (Michael van Elst) writes:
- >In <13511@swrinde.nde.swri.edu> kent@swrinde.nde.swri.edu (Kent D. Polk) writes:
- >>Whyever not? I have a CAMAC crate with a couple of DSP technologies 200 MHz
- >>digitizers which can multiplex for an additional two channels at 100 MHZ
- >>each.
- >
- >It surely does make sense if you have a CAMAC crate with some useful
- >equipment. But CAMAC is IMHO something antiquated :-) And an interface
- >requires more work than say the VME bus.
- >
- >If you really need such an interface I can try to design one. But I won't
- >be able to actually build it..
- >
- >Regards,
- >--
- >Michael van Elst
- >UUCP: universe!local-cluster!milky-way!sol!earth!uunet!unido!mpirbn!p554mve
- >Internet: p554mve@mpirbn.mpifr-bonn.mpg.de
- > "A potential Snark may lurk in every tree."
-
- --
-
- question: is there an IEEE 488 Interface available for CAMAC ??
-
- ( we have an IEEE 488 Controller for A2000/3000 . Is that the solution ? )
-
-
- --
- Manfred Dolag, Edotronik GmbH (ECG018), Tel. +49 89 404093, FAX +49 89 402293
- St.-Veit-Str. 70, 8000 Muenchen 80, Germany
- -*-*- for email from outside of Commodore Developer Group please use: -*-*-
- -*-*-*- Path: cbmehq!cbmger!edomdo!manfred@cbmvax.commodore.com -*-*-*-
-