home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!usc!zaphod.mps.ohio-state.edu!cis.ohio-state.edu!rutgers!cbmvax!cbmehq!cbmger!edomdo!manfred
- From: manfred@edomdo.UUCP (Manfred Dolag)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Zorro <> CAMAC Bus interface needed
- Message-ID: <manfred.01jj@edomdo.UUCP>
- Date: 7 Sep 92 18:53:20 GMT
- References: <13490@swrinde.nde.swri.edu>
- Organization: Edotronik GmbH
- Lines: 39
-
- In article <13490@swrinde.nde.swri.edu> kent@swrinde.nde.swri.edu (Kent D. Polk) writes:
- >
- >
- >We are in need of an Amiga to CAMAC bus interface card. The CAMAC bus is a
- >scientific instrumentation bus with 16bit data, 20bit address.
- >
- >I would be seriously interested in discussing this matter with someone who is
- >technically competent to make such a bus interface for us.
- >
- >Please contact me at:
- >
- >Kent Polk: Southwest Research Institute
- >Internet : kent@swrinde.nde.swri.edu
- >UUCP : $ {cs.utexas.edu, gatech!petro, sun!texsun}!swrinde!kent
- >Phone : (512) 522-2882
- >
- >US Mail :
- >
- >Kent Polk - Div 17
- >Southwest Research Institute
- >PO Box 28510
- >San Antonio, TX 78284
- >USA
-
- --
- we did already a VME-BUS-Interface for Amiga ( so I think, we can do also a
- CAMAC-Interface )
-
- Please mail spec you need: 1. which level of CAMAC do you use ?
- 2. which funktions of CAMAC do you need
- to us from Amiga ?
-
-
-
- --
- Manfred Dolag, Edotronik GmbH (ECG018), Tel. +49 89 404093, FAX +49 89 402293
- St.-Veit-Str. 70, 8000 Muenchen 80, Germany
- -*-*- for email from outside of Commodore Developer Group please use: -*-*-
- -*-*-*- Path: cbmehq!cbmger!edomdo!manfred@cbmvax.commodore.com -*-*-*-
-