home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!charon.amdahl.com!pacbell.com!mips!swrinde!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!slc3.ins.cwru.edu!agate!stanford.edu!rock!concert!mcnc!theo!brooks
- From: brooks@mcnc.org (Ted Brooks)
- Newsgroups: rec.autos.tech
- Subject: Re: Removal of headrests
- Message-ID: <1992Aug19.180025.25844@mcnc.org>
- Date: 19 Aug 92 18:00:25 GMT
- References: <1992Aug19.123806.7046@ac.dal.ca>
- Sender: daemon@mcnc.org (David Daemon)
- Organization: MCNC Center for Microelectronics, RTP, NC
- Lines: 18
- Nntp-Posting-Host: alvin.mcnc.org
-
- In article <1992Aug19.123806.7046@ac.dal.ca> roneill@ac.dal.ca writes:
- >I have always found that a hacksaw blade is a wonderful
- >tool for removing headrests. Just follow the instructions
- >
- Removal with a hacksaw blade? But what if he wants to use his headrests
- later? :-)
-
-
- Ted Brooks
- ______________________________________________________________________
- | Disclaimer: The opinions expressed are my own, and do not reflect |
- | those of my employer. Advice is free, but you get what you pay for. |
- | ________ |
- | _____| 1955 |_______ |
- | / Chevrolet / |
- | /______ BelAir _____/ |
- | |________| |
- |______________________________________________________________________|
-