home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!uunet.ca!xenitec!zswamp!geoff
- From: geoff@zswamp.UUCP (Geoffrey Welsh)
- Newsgroups: comp.dcom.modems
- Subject: Re: RTS problem w/USR Dual Standard
- Message-ID: <a0k5wB8w165w@zswamp.UUCP>
- Date: Sat, 09 Jan 93 14:56:45 EST
- References: <BJuliano.10.726207943@rm42.ucc.uconn.edu>
- Organization: Izot's Swamp
- Lines: 19
-
- BJuliano@rm42.ucc.uconn.edu (Bryan Juliano) writes:
-
- > I had my USR square dual standard working fine with RTS/CTS flow control.
- > Today it stopped working. I was using the R2 command before and now it
- > keeps the modem from communicating as the RS light never comes on. I
- > verified the lack of RTS with a RS232 led tester. The results are the same
- > on both com ports on each of two computers, using dos redirection, QModem
- > and Telemate, no RTS. Any ideas?
-
- Have you checked the cable (e.g., put the lead tester right on your RS-232
- port)? Have you tried it with the modem disconnected (to see if it's jamming
- the RTS signal)?
-
- Geoffrey Welsh, 7 Strath Humber Court, Islington, Ontario, M9A 4C8 Canada
- geoff@zswamp.uucp, [xenitec.on.ca|m2xenix.psg.com]!zswamp!geoff (416)258-8467
- Now I've lost everything, I give to you my soul
- And the meaning of all that I believed before escapes me
- In this world of none, no thing, and no one
- - Genesis, _Afterglow_
-