home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.mac.comm
- Path: sparky!uunet!nih-csl.dcrt.nih.gov!helix.nih.gov!gooey
- From: gooey@helix.nih.gov (Sean Graham)
- Subject: External Modem on Duo 230
- Message-ID: <1993Jan2.042357.10880@alw.nih.gov>
- Followup-To: comp.sys.mac.comm
- Sender: gooey@helix.nih.gov
- Organization: National Institutes of Health, Bethesda
- Distribution: usa
- Date: Sat, 2 Jan 1993 04:23:57 GMT
- Lines: 31
-
- I've got a brand new Duo 230 that obviously didn't ship with
- the new Express Modem (since it's not out) so I tried to hook
- it up to an external USR Courier v.32bis via it's
- modem/printer port.
-
- Only problem is, none of the programs can find the modem.
- I've tried Versaterm PRO, Zterm and the Shiva Dial-in program
- and none of them can open the port.
-
- So I break down and read the manual and sure enough it says
- (p. 260) that I should open the Powerbook Control panel and
- make sure that the external modem option is enabled. Well,
- when I open the cp there is no such option. The only 3
- options abailable on my cp are battery, scsi, and wake-up.
-
- So what's up? How do I enable this port? (I've checked the
- phone lines, modem and cable and am sure they all work).
-
- Any suggestions welcome...
-
- Thanks in advance,
-
- Sean
-
- sean@zippy.nimh.nih.gov
-
- --
- || Sean N. Graham NIH DoD# 601 AMA# 601894 ||
- || '91 GSX600FM | '85 RX-7 Bethesda, Md gooey@helix.nih.gov ||
- || "This is a test of the Emergency Broadcasting System. This is just a ||
- || test. In the event of a real emergency you would most likely be dead." ||
-