home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!usc!news.service.uci.edu!ucivax!mac_dungeon.ics.uci.edu!user
- From: truesdel@ics.uci.edu (Scott Truesdell)
- Subject: Re: MacPlus - No Video!
- Nntp-Posting-Host: mac_dungeon.ics.uci.edu
- Message-ID: <truesdel-161292205910@mac_dungeon.ics.uci.edu>
- Newsgroups: comp.sys.mac.hardware
- Organization: ICS Department, U.C.I.
- Lines: 14
- References: <liob05INNrc6@jethro.Corp.Sun.COM>
- Date: 17 Dec 92 04:59:37 GMT
- Followup-To: comp.sys.mac.hardware
-
- > I have a MacPlus that exhibits the following symptoms:
- >
- > * intermittent flashing on screen
- >
- > * sometimes no video upon powerup
- >
- > * flashing, then total loss of video
-
- Either you have a loose connector or, much more likely, your analog board
- is dead or dying. In any event, unless you can open the case, discharge the
- CRT, and optain spares cheaply, it needs a tripp to an authorized Apple
- tech. If it's the board, it's going to cost at least $100.
-
- --scott
-