home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.mac.system
- Path: sparky!uunet!caen!nuntius
- From: Jeffrey L. Needleman <JNeedleman@MCIMail.com>
- Subject: Re: Which is less buggy, 6.0.7 or 6.0.8?
- Message-ID: <M-W-t0A@engin.umich.edu>
- Date: Thu, 30 Jul 92 18:32:37 EDT
- Organization: The University of Michigan, Ann Arbor
- References: <rich.712525288@pencil>
- X-Useragent: Nuntius v1.1
- Nntp-Posting-Host: via.dsf1.merit.edu
- Lines: 19
-
- In article <rich.712525288@pencil> Rich Winkel,
- rich@pencil.cs.missouri.edu writes:
- >I know of at least one program I use which works fine under 6.0.7 but
- bombs
- >in 6.0.8. So the question is, should I upgrade everyone to 6.0.8, or
- would
- >I be better off using 6.0.7 with the 6.0.8 lw print driver?
-
- I'm surprised--what is that program working under 6.0.7 but not under
- 6.0.8?
-
- In any case, there's another alternative: use the usual system 7.0 or
- 7.0.1 disks to do a custom install of JUST THE PRINTING SOFTWARE on the
- 6.0.7 machines. Test the result with that problem program. If all is OK,
- then also considering using the newer printer drivers and chooser
- extensions on the Tune-Up 1.1.1 disk as well. Make sure everyone on the
- network has those same printing tools if you do decide to upgrade.
-
- Jeff
-