home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.hardware
- Path: sparky!uunet!munnari.oz.au!uniwa!cujo!marsh!amuser
- From: amuser@marsh.cs.curtin.edu.au (Bill Sharp-Smith AUG)
- Subject: Re: Bigger buffer...use EZSpool.
- Message-ID: <amuser.712313173@marsh>
- Sender: news@cujo.curtin.edu.au (News Manager)
- Organization: Curtin University of Technology
- References: <1992Jul13.105124.8687@bsu-ucs.uucp> <1992Jul13.203809.11548@ultb.isc.rit.edu> <1992Jul15.134156.1472@uni2a.unige.ch>
- Date: Tue, 28 Jul 1992 08:46:13 GMT
- Lines: 22
-
- zucker@uni2a.unige.ch writes:
-
- >check out my EZSpool. it's on amiga.physik.unizh.ch, wuarchive, and other
- >FTP sites. it's v1.0 which is functional. I'm working on v2.0 right now.
- >the principle is the following : use CMD to redirect printer device output
- >to a file in, say, work:spool. EZSpool gets notified when the directory is
- >changed and sends the file out to the parallel port. E-Mail for more info.
-
- I tried this program, but it didn't seem to work. Basically, nothing
- happened when I put a file in the assigned directory. I used CMD and
- also tried just copying a file to the directory. I am using WB2.04.
-
- Gary McGhee
- .
- --
- ________________________________________________________________________
- /[ /~7 / / /~~ / / /~7 | Email: amuser@marsh.cs.curtin.edu.au ]
- [ / 7 /_/ /_7 //l/ / 7 | By post: PO Box 595, Cloverdale,W. Aust 6105 ]
- [ Amiga Users Group of | ]
- [ Western Australia Inc | Opinions expressed are my own etc... ]
- [_______________________________________________________________________]
- / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
-