home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 36 Tips
/
36-Tips.zip
/
osinapm.txt
< prev
next >
Wrap
Text File
|
1997-04-27
|
2KB
|
54 lines
OSINAPM - TRAP000D AFTER INSTALLING OS/2 2.11 OR OS/2 WARP ON A
NON-IBM SYSTEM
01/29/96
=======================================================================
TRAP000D after Installing OS/2 2.11 or OS/2 Warp on a Non-IBM System
=======================================================================
Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------
DESCRIPTION
When restarting the system after installing OS/2 2.11 MR1 or OS/2 Warp
3.0, the following message is received:
TRAP000D CS:EIP=0768:00000011 CSLIM=0000ffff
RESOLUTION
Note: Make sure you have a backup of any file you intend to change.
Currently, non-IBM clones with Advanced Power Management (APM) features
are not compatible with APM drivers under OS/2.
If this message is received after a full installation, check the CMOS
and disable any APM options that are set. (System boards are not tested
for APM.) If the CMOS does not have APM support, edit the CONFIG.SYS
file and remark-out (REM) the following statements (x is the drive
where OS/2 is installed):
* OS/2 Warp:
DEVICE=x:\OS2\BOOT\APM.SYS
DEVICE=x:\OS2\MDOS\VAPM.SYS
* OS/2 2.11:
DEVICE=x:\OS2\APM.SYS
DEVICE=x:\OS2\MDOS\VAPM.SYS
Save and exit the CONFIG.SYS file, and then restart the system to
activate the changes.
______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including
without limitation, warranties of fitness and merchantability with
respect to the information in this document. By furnishing this
document, IBM grants no licenses to any related patents or copyrights.
Copyright (c) 1994, 1996 IBM Corporation. Any trademarks and product
or brand names referenced in this document are the property of their
respective owners. Consult your product manuals for complete trademark
information.