The World of Computer Software

home *** CD-ROM | disk | FTP | other *** search

/ The World of Computer Software / World_Of_Computer_Software-02-385-Vol-1of3.iso / m / mmaker12.zip / MMAKER.DOC < prev next >

Wrap

Text File | 1991-12-19 | 21KB | 492 lines

MATCH MAKER v1.2 by Al Lawrence Sunrise-80 BBS (404) 256-9525 DESCRIPTION ___________ Match Maker allows for the matching of callers with like interests based upon answers given to questions developed by the Sysop. You may create up to 50 questions to be asked of each caller. You may create a different set of questions, based upon the callers sex. All that is required is to assign the proper filename to each set. You may create a file containing names you do not want used as an alias (registered verion only). You may limit the number of times a caller may access the door. You may send and receive PRIVATE messages (does not affect the normal BBS message base). Message database can accomodate 1000 messages. Caller database can accomodate 1000 users. All Caller database records contain the logon name of the caller. A maintainance program is supplied to be used to purge the databases. Command line parameters define the purge criteria. (Registered version only). Unregistered version allows for the search and viewing of Callers records (search may ben Alias or logon name). NOTE: Most errors will be logged to a file called DFRAME.ERR which is created in the directory you run the door from. INSTALLATION/LIMITATIONS ________________________ Installation is fairly easy and straight-forward. The following steps and examples should have you up and running in a very short period of time. It is assumed that you are familiar with setting up DOORS on your system. To this end, only examples of the configuration file and Door batch file are described. 1) Create a directory to hold all MATCH MAKER files 2) Unzip MMAKERxx.ZIP into the the above directory NOTE: BRUN45.EXE is not included but is required !!! 3) Create a configuration file, with a name of your choice, or modify the supplied MMAKER.CFG file. A description follows: ** Location of system file (See Below) SUNRISE-80 BBS Your BBS Name Al Sysop's First Name Lawrence Sysop's Last Name 00000000 Registration Number # 2 Keyboard timeout value in Minutes ! # 1 Maximum # of Games per day (Sysop gets 99, Registered version ONLY) 2 1 = DO NOT Display ADOPT-A-DOOR Message 2 = Display ADOPT-A-DOOR message ! # 0 Time allowed in Door (Sysop = Time Remaining - REG. VERSION) ! # 000=00/00 Security Level/Games Allowed Per Day ! # 000=00/00 Security Level/Games Allowed Per Day ! # 000=00/00 Security Level/Games Allowed Per Day ! # 000=00/00 Security Level/Games Allowed Per Day ! # 000=00/00 Security Level/Games Allowed Per Day ! # 000=00/00 Security Level/Games Allowed Per Day ! # 000=00/00 Security Level/Games Allowed Per Day ! # 000=00/00 Security Level/Games Allowed Per Day ! # 000=00/00 Security Level/Games Allowed Per Day ! # 000=00/00 Security Level/Games Allowed Per Day @ # XXXX/YYYY Blackout Range From/To @ # XXXX/YYYY Blackout Range From/To @ # XXXX/YYYY Blackout Range From/To @ # XXXX/YYYY Blackout Range From/To @ # XXXX/YYYY Blackout Range From/To ** = Replace with ONE of the following: C:\PCB\PCBOARD.SYS <- For PCBoard systems using PCBOARD.SYS only C:\BBS\CALLINFO.BBS <- For Wildcat! systems (prior to v3.0) C:\BBS\USERINFO.DAT <- For Wildcat! systems using v3.x (Note:DOOR.SYS must be in SAME directory) C:\BBS\DOOR.SYS <- For systems that support DOOR.SYS C:\BBS\DORINFOx.DEF <- For QBBS/RBBS/RA. Replace x with Node #. C:\BBS\SFDOORS.DAT <- For Spitfire systems. C:\BBS\CHAIN.TXT <- For WWIV systems # = Requires registration to change to a different value. ! = See "Plays Per Day" Below @ = See "Blackout Periods" Below NOTE: There are NO Blank Lines in the Config File!! 4) Create a batch file or modify the MMAKER file supplied. A description of this file follows: ECHO off cd\PCB\DOORS\MMAKER Location of MatchMaker files MMAKER MMAKER.CFG EXE filename and CFG filename (Name used in creating file in #3 above) CD\PCB * BOARD * This is for PCboard. Replace with whatever your software requires to return to the BBS 5) When running in more than one node, be sure to supply a different configuration name for each node (your choice of name). 6) The maximum number of messages that can exist in the Message Database is 75 in the UNREGISTERED version and 1000 in the REGISTERED version. BLACKOUT PERIODS ________________ Use the Blackout ranges option to define up to 5 time periods during which you DO NOT want the Door to be played. If a caller tries to access the Door during the Blackout period, they will be shown a message that contains ALL the Blackout periods you have defined, and to try the Door at a later time. Each of the 5 Blackout ranges takes the form of XXXX/YYYY, where XXXX=beginning time and YYYY=the ending time. For example, 0930/1230 means to NOT allow the Door to be played between 9:30am and 12:30pm. IMPORTANT: - All times must be 4 digits & must follow the XXXX/YYYY format - DO NOT change the XXXX/YYYY entry UNLESS you want to assign a Blackout range. - You MUST use the MILITARY time format. Example: 2030=8:30pm 0900=9am, 0030=12:30am, 1700=5pm, etc. TRASHCAN FILE _____________ This is a text file you must create (if you wish to use one), with a file name of MMTCAN.DAT and it must reside in the Door directory. This file is used if you want to block the use of "offensive" alias' callers may choose to use. Each name (up to a maximum of 10 characters must appear on a separate line within the text file. NOTE: The name must match EXACTLY !!! This file is valid only with registered versions of the Door PLAYS Per DAY/DOOR Time _______________________ Plays Per Day and Door Time can be controlled several ways: (1) You can use the Games Per Day, singular option, in the config file above. This option, will affect ALL callers whose Security Level is NOT defined in any of the 10 optional Security Level/ Plays Per Day entries in the config file. (2) You can use the Door Time, singular option, in the config file above. This option, will affect ALL callers whose Security Level is NOT defined in any of the 10 optional Security Level/ Plays Per Day/Door Time entries in the config file. (3) You can restrict the number of games a specific Security Level will be allowed to play per day or REWARD specific Levels with more Plays Per Day. Likewise, you can restrict the Play time for a specific Security Level or REWARD specific Levels with more Door Time. These options are handled by the use of the 10 config entries (000=00/00). The format of each entry is as follows: XXX=YY/ZZ where XXX is the Security Level (must be 3 digits) where = is a constant and MUST be included where YY is the # of games per day (must be 2 digits) where / is a constant and MUST be included where ZZ is num. minutes per Door entry (must be 2 digits) If the callers Security Level is NOT defined, his/her Plays Per Day and Door Time will be controlled by the values in items (1) and (2), above, respectively.. You may define up to 10 Security Levels. All unused entries must be defined as 000=00/00 -------------------------------------------------------------------- Example: Suppose you had 3 Security Levels defined on your BBS as (20=Subscriber, 30=Visiting Sysop, 40=CoSysop, 90=Friend) and you wanted to set Plays Per Day as : Subscriber=5 Visiting Sysop=2 CoSysop=3 Friend=10 and Door Time as follows: Subscriber=30 minutes Visiting Sysop=20 minutes CoSysop=10 minutes Friend=remaining call time You would set the Individual "Games per Day" config entry to 1 and the individual "Door Time" to 5 minutes (these would be the default number of games and default Time for all Security Levels other than 20,30 or 40... make them any number you want). Next you would replace 4 of the Security Level entries as : 020=05/30 030=02/20 040=03/10 090=10/0 QUESTION FILE(S) SETUP ______________________ MatchMaker has the ability to use 2 question files, one for Male and one for Female. The Male question file must be named MMQUESTM.QUE and the Female question file must be named MMQUESTF.QUE. The Male file is REQUIRED to be present and the Female file is OPTIONAL. If you do NOT want separate question files, DO NOT create the MMQUESTF.QUE file. If you do use both, bear in mind that the questions should be essentially the same, but may be "slanted" to either sex. You will not get many matches if you use entirely different questions and answers. A sample MMQUESTM.QUE file is included to get you started. You may have up to 50 questions. Each question can be up to 2 lines Each question can have up to 14 answers. The following is an explanation of how to set up this file: 38 <number of questions in this file 1 <number of lines in the 1st question 10 <number of answers How old are you? <question line 1 Less than 18 years old <answer A 18 - 20 years old <answer B 21 - 25 years old <answer C 26 - 28 years old <answer D 29 - 32 years old <answer E 33 - 38 years old <answer F 39 - 43 years old <answer G 44 - 49 years old <answer H 50 - 60 years old <answer I Over 60 years old <answer J 2 <number of lines in the last question 3 <number of answers "Now honestly, did you tell the whole truth on the" "questionnaire, and nothing but the truth so help you God?" "Yes, I told the whole truth" A few lies never hurt anyone I told mostly the truth In the above example the first line is the total number of questions contained in the file. Line 2 is the number of lines in the first question. Line 3 is the number of answers listed for the question. Line 4 is the first question in the file. Lines 5 to 13 are the answers for the first question The last 7 lines break down as follows: Line 1 states that this question has two lines. Line 2 states that there are 3 answers listed Line 3 is the first line of the question. Line 4 is the second line of the question. Line 5 is the first answer. Line 6 is the second answer. Line 7 the third and last answer. A line, whether a question or an answer, must be enclosed in quotation marks (") if the line contains any punctuation other then a '?'. (see example files) The shorter the question the better. One liners are the best, two liners ok, but three or more becomes tedious. There are two questions you need not worry about including in the file. These are: What is your Sex What is your current age Since the program must have these to work correctly, they are asked when you first log on. MATCHMAKER MAINTENANCE PROGRAM (MMAINT) _______________________________________ The Caller Databse and Message Database, that MatchMaker utilizes, must be purged periodically. The Caller database can hold a maximum of 1000 callers, and the Message database can hold a maximum of 1000 messages. After a message is read, it is marked for deletion, but not physically deleted form the database. The maintenance program (MMAINT), when run, will remove all messages marked for deletion, as well as those messages that have ben on the system longer than the number of days specified on the command line. There are 2 ways to remove a caller form teh Callers database. You can delete it manually, after searching for & viewing the record or automatically if the door has not been accessed in the number of days specified on the command line. The command line required to run MMAINT is as follows: MMAINT vvvvvvv.CFG /E:x /MDAYS:yy /CDAYS:zzz vvvvvvv.CFG = MatchMaker Confgiuration FIle x = N (Run Manually) x = Y (Run as an Event) yyy = Delete message if message is older than yyy days. zzz = Delete User if MMAKER not accessed in zzz days. As you can see, you can run MMAINT in your nightly event and/or manually. Just adjust the /E: parameter, on the command line, accordingly. Special Note: The only option available to Non=Registered users is the option to search/view a caller's record. All other require you to run a registered copy of MatchMaker. COM Support ___________ Support for COM 1-4 on the standard IRQ's - COM1/COM3 = IRQ4 and COM2/COM4 = IRQ3. If you wish to use a non-standard IRQ, add the IRQ number after the configuration filename. Let's assume your Door is called FOOBAR and you want to use COM1 and IRQ5. The command line passed to your Door would be: FOOBAR FOOBAR.CFG /5 The /5 tells FOOBAR to use IRQ5 rather than the standard IRQ4 that is normally used with COM1. No /x parameter is needed for the standard IRQ's. ADOPT-A-DOOR ____________ Having been a Sysop for a number of years, I have had my share of problems and frustrations getting financial support for my board's upkeep. A fellow Sysop left a message on my board, not long ago, about a concept that was being used by several boards around the country. The concept, ADOPT-A-DOOR, allows a caller to register (ADOPT) a door. It would be the same as sending in a donation, only this way it is earmarked for registering a particular door. In a way, the user feels he/she is "getting something in return". As a Door author I have decided to build this concept into each of my Door programs. The concept replaces the usual message "tell the Sysop to register this Door" we find in most doors. If the Door is unregisterd then a message appears on the opening screen to that effect. After finishing or suspending a game, a message screen is displayed about the ADOPT-A-DOOR concept. The message also tells the caller to contact the Sysop to find out if there is any further details to the ADOPT-A-DOOR concept. Some Sysops give extra D/L time, online time, etc to callers that ADOPT-A-DOOR. If the Door has been registered, either by the Sysop or other callers, the names of those contributors will be displayed in the closing screen. NOTE: If you want to display the names of the callers that contributed to registering the Door, you must create an ASCII file called ADOPT.SYS. You create it with an Editor or Word Processor. Enter the name(s) of the contributors (one on each line, maximum of 5 entries, each a maximum of 30 characters long). This file must be saved, in ASCII format, and placed in the Door directory. LEGALITIES __________ THIS SOFTWARE AND ACCOMPANYING MATERIALS ARE DISTRIBUTED "AS IS" WITHOUT WARRANTY, EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ANYONE INVOLVED WITH THE CREATION AND PRODUCTION OF THIS PRODUCT BE LIABLE FOR INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES, ARISING OUT OF ANY USE THEREOF OR BREACH OF ANY WARRANTY. DISTRIBUTION ____________ You may make this file available for downloading from your BBS or you may upload it to any BBS of your choice, provided that you do not make any changes to the contents of the archive (ZIP file). The archive and its individual contents may not be used by any service that charges any money whatsoever, without the written permission of the author. REGISTRATION ____________ Registration and the subsequent insertion of the registration number into your configuation file, allows for the display of your BBS name on the opening and closing screen as well as the reduction of a delay built into the opening screen display along with the ability to change certain values in the configuration file. To register your copy of BETSY, please fill out the registration form (REGISTER.FRM) and mail it along with a small donation ($20,25,etc) to the name and address on the form. Be sure to use the proper upper/lower case when filling in your name and BBS name, as they MUST match the way you entered them in the configuration file. ^^^^ Based upon information supplied on the registration form, I will pre- register you on my BBS. You will then be able to call SUNRISE-80 and pick up your registration number. MISC ____ The latest version of MATCH MAKER and other fine SUNRISE DOOR programs are always available for download from SUNRISE-80 BBS. Remember, should you have any problems, questions or suggestions, be sure to drop me a message on Sunrise-80 or in the RIME network (BBS_Doors, PCBHints, SYSops) or on SMARTNET (SN_Sysops).