Some Comtrol® software (device drivers, utilities, and tools) are compressed and you must extract the files before installation. For assistance, see Extracting Comtrol Driver Packages.

Product

Files

Description

Installation

Rev E

Use this document for installation and user information for the DeviceMaster Primo.

Using Raw and Pair Connection Methods

Rev B

This document provides information about using raw and pair connections with the DeviceMaster Primo.

Firmware

v2.40

You must install one of the Windows drivers to access the DMupg.exe Utility, which is required to updated the firmware on the DeviceMaster Primo.

Linux

V1.02

Refer to the readme file bundled with the driver for installation procedures. You can also download LCOM, which can be used for testing serial ports on a Linux system.

Using minicom

Rev C

This document discusses using minicom, a built-in serial communication utility. You can use minicom for sending commands to attached modems.

Windows 98

Windows Me

V1.05

You can use the DeviceMaster Primo Serial Port Server Device Driver Installation guide for installation procedures.

Windows 2000

V1.07

You can use the DeviceMaster Primo Serial Port Server Device Driver Installation guide for installation procedures.

Windows NT

4.0

V1.05

You can use the DeviceMaster Primo Serial Port Server Device Driver Installation guide for installation procedures.

Windows XP

V1.07

You can use the DeviceMaster Primo Serial Port Server Device Driver Installation guide for installation procedures.

Test Terminal

Windows 98/Me

WIndows NT

Windows 2000/XP

V1.01

This is a test terminal program that you can use to test the port.

Note
Products labeled Obsolete means that both the product and download files are obsolete and are AS IS (in mature status and are no longer updated). Limited Technical Support available.

	06/11/14	Home \| Comtrol Support
	Copyright © 2014 Comtrol Corporation.