Andrew's Guide on how to build a computer
Step 2: Installing motherboard risers.
Keep the motherboard from touching the metal surfaces
Remove your motherboard from its packaging and lower it into the case.
Installing the Motherboard, CPU
Line up the ports on the motherboard (PS/2, USB, etc.)
with the appropriate holes in the back panel I/O shield
of the case (see pic below).
Once the board is temporarily in place, observe which screw holes in the case
line up with the holes in the motherboard. These are where you will need to
place risers if they are not already pre-installed. Remove the motherboard
and insert the risers in the appropriate screw holes.
Writer: Andrew Densmore
Email: Densmore_a@yahoo.com