home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.xmission.com
/
2014.06.ftp.xmission.com.tar
/
ftp.xmission.com
/
pub
/
lists
/
dr350
/
archive
/
v01.n222
< prev
next >
Wrap
Internet Message Format
|
1999-12-14
|
7KB
From: owner-dr350-digest@lists.xmission.com (dr350-digest)
To: dr350-digest@lists.xmission.com
Subject: dr350-digest V1 #222
Reply-To: dr350-digest
Sender: owner-dr350-digest@lists.xmission.com
Errors-To: owner-dr350-digest@lists.xmission.com
Precedence: bulk
dr350-digest Wednesday, December 15 1999 Volume 01 : Number 222
----------------------------------------------------------------------
Date: Tue, 14 Dec 1999 12:20:51 EST
From: Comobu@aol.com
Subject: (dr350) DR ergos
JD,
Well allright, someone else thinks the pegs are to far forward putting the
bars in my lap!!!(I'm 6'1'') Did you cut and reweld to get them 2" back??..
I've been staring at both peg mounts trying to figure out how... Thank you
Guy
Support Dual Sport News with your subscription http://www.geocities.com/~klrdsn/page2.html
Visit the dr350 archives at http://www.listquest.com/lq/search.html?ln=dr350
Unsubscribe by sending a message to majordomo@lists.xmission.com
Leave subject blank, message is unsubscribe dr350 (or dr350-digest).
------------------------------
Date: Wed, 15 Dec 1999 00:04:51 -0000
From: "ThunderSUB" <thundersub@ip.pt>
Subject: Re: (dr350) dr clutch arm
Hi guys,
I have the PEP E-Z Arm (WB P/N 76-122) + a Terminator Clutch Cable (WB P/N
49-159) and in my opinion they are worth every penny ($19.95 + $26.20).
My DR is a '93 DR-S and I am using it without any problems. Installation was
very simple (I replaced the clutch cable also).
The clutch pull is a lot easier and effortless now.
The feel is also excellent. I ordered it from WB.
I just don't know which one of the parts (the arm or the new cable) made the
biggest improvement, but the combo works great !
Just get it !
Hope
ThunderSUB (Claudio)
Lisbon, Portugal
http://drive.to/thundersub
thundersub@ip.pt
ICQ# [3072424]
* 1982 Honda Dax 70
* 1993 Suzuki DR377 S
* 1999 Yamaha YZF-R1
Support Dual Sport News with your subscription http://www.geocities.com/~klrdsn/page2.html
Visit the dr350 archives at http://www.listquest.com/lq/search.html?ln=dr350
Unsubscribe by sending a message to majordomo@lists.xmission.com
Leave subject blank, message is unsubscribe dr350 (or dr350-digest).
------------------------------
Date: Tue, 14 Dec 1999 17:28:50 -0800
From: Doug Bragg <dbragg@seatac.net>
Subject: (dr350) clutch cable, was RE: dr clutch arm
Speaking of clutch cables, on any ride where you plan on riding any
distance away from civilization, carry a spare clutch cable. I do, I pack
in my toolkit that I strap onto my Dual Star rack on the rear fender.
If anyone hasn't seen my list of goodies that I always carry riding, here
it the link to my web page:
http://members.tripod.com/dougb1969/dualsport/myride.html
and
http://members.tripod.com/dougb1969/dualsport/gearlist.html
- -----Original Message-----
From: ThunderSUB [SMTP:thundersub@ip.pt]
Sent: Tuesday, December 14, 1999 4:05 PM
To: Comobu@aol.com; dr350@lists.xmission.com
Subject: Re: (dr350) dr clutch arm
Hi guys,
I have the PEP E-Z Arm (WB P/N 76-122) + a Terminator Clutch Cable (WB P/N
49-159) and in my opinion they are worth every penny ($19.95 + $26.20).
My DR is a '93 DR-S and I am using it without any problems. Installation
was
very simple (I replaced the clutch cable also).
The clutch pull is a lot easier and effortless now.
The feel is also excellent. I ordered it from WB.
I just don't know which one of the parts (the arm or the new cable) made
the
biggest improvement, but the combo works great !
Just get it !
Hope
ThunderSUB (Claudio)
Lisbon, Portugal
http://drive.to/thundersub
thundersub@ip.pt
ICQ# [3072424]
* 1982 Honda Dax 70
* 1993 Suzuki DR377 S
* 1999 Yamaha YZF-R1
Support Dual Sport News with your subscription
http://www.geocities.com/~klrdsn/page2.html
Visit the dr350 archives at
http://www.listquest.com/lq/search.html?ln=dr350
Unsubscribe by sending a message to majordomo@lists.xmission.com
Leave subject blank, message is unsubscribe dr350 (or dr350-digest).
Support Dual Sport News with your subscription http://www.geocities.com/~klrdsn/page2.html
Visit the dr350 archives at http://www.listquest.com/lq/search.html?ln=dr350
Unsubscribe by sending a message to majordomo@lists.xmission.com
Leave subject blank, message is unsubscribe dr350 (or dr350-digest).
------------------------------
Date: Tue, 14 Dec 1999 21:56:58 -0800
From: "Jesse Kisntz www.kientech.com" <jesse@rvi.net>
Subject: RE: (dr350) dr clutch arm
Hi Guy, this is really bazarr that you should ask, because I just ordered
some today they are really
trick looking they are cnc machined from billit aluminum and should make a
big difference on the clutch pull I have a barnett set in mine and it is
stiff. I should have them by next week I plan on retailing them for 27.00
including shipping. merry Christmas to you and yours. Jesse
- -----Original Message-----
From: owner-dr350@lists.xmission.com
[mailto:owner-dr350@lists.xmission.com]On Behalf Of Comobu@aol.com
Sent: Tuesday, December 14, 1999 9:14 AM
To: dr350@lists.xmission.com
Subject: (dr350) dr clutch arm
Jesse... you seem to be coming out with some great products for our bikes...
how about a slightly longer clutch actuating arm for an easier pull? White
Bros. sells a PEP arm but says it only fits 95,96 DR models??? All day
aggressive riding and my upper arms are so tired.. every little bit would
help
Guy
Support Dual Sport News with your subscription
http://www.geocities.com/~klrdsn/page2.html
Visit the dr350 archives at http://www.listquest.com/lq/search.html?ln=dr350
Unsubscribe by sending a message to majordomo@lists.xmission.com
Leave subject blank, message is unsubscribe dr350 (or dr350-digest).
Support Dual Sport News with your subscription http://www.geocities.com/~klrdsn/page2.html
Visit the dr350 archives at http://www.listquest.com/lq/search.html?ln=dr350
Unsubscribe by sending a message to majordomo@lists.xmission.com
Leave subject blank, message is unsubscribe dr350 (or dr350-digest).
------------------------------
Date: Wed, 15 Dec 1999 12:57:11 EST
From: Comobu@aol.com
Subject: (dr350) clutches arms.. cables
...good tip Doug.. Thanks.
Jesse, I'll take one when you get 'em... mine's a 91DR.
Guy
Support Dual Sport News with your subscription http://www.geocities.com/~klrdsn/page2.html
Visit the dr350 archives at http://www.listquest.com/lq/search.html?ln=dr350
Unsubscribe by sending a message to majordomo@lists.xmission.com
Leave subject blank, message is unsubscribe dr350 (or dr350-digest).
------------------------------
End of dr350-digest V1 #222
***************************