![](/file/12652/www.mactech.com.tar/www.mactech.com/sites/all/themes/custom_front/images/you_are_here_red.gif)
![](/file/12652/www.mactech.com.tar/www.mactech.com/sites/default/files/beta-site.gif)
|
Volume Number: 18 (2002)
Issue Number: 8
Column Tag: QuickTime Toolkit
A Bug's Life
Retrieving Errors in QuickTime Applications
by Tim Monroe
Introduction
Termites happen. So do errors in QuickTime-savvy applications -- often for reasons other than mere sloppy programming. Network connections can fail in the middle of downloading a movie file or other data. System resources (memory, disk space, and so forth) can get depleted while an application runs. Components necessary for the playback of some media data might not be available on a particular machine. In short, lots of unpredictable occurrences can lead to the failure of QuickTime functions. How you deal with those failures is up to you. You might throw an exception, which (hopefully) is caught by an exception handler. Or you might just return an error code to your caller and expect it to handle the error gracefully. This is all part of the theory and practice of error handling, which is often the subject of heated debates among programmers. But before you even begin to handle an error, you first need to discover that it occurred in the first place. That's the subject of this article: how to determine that a QuickTime function has failed to do what you wanted it to do.
At first glance, this might seem like a fairly trivial topic. After all, many QuickTime functions return a result code that indicates the success or failure of the operation. But in fact things are not always that simple. For starters, not all QuickTime functions return a result code directly to the caller. Many of them, particularly Movie Toolbox calls, return a result code only indirectly, and we need to do a little work to retrieve that result code. We'll begin this article by looking at how to do that. Also, it's easy to misinterpret some of these result codes, so we'll investigate some of the pitfalls lurking here. Toward the end of the article, we'll take a look at a bug in our sample applications that I inadvertently added a few months ago.
Error-Reporting Functions
A large number of QuickTime functions return a result code directly to the caller as their function result. For instance, the EnterMovies function is declared essentially like this:
OSErr EnterMovies (void);
If a call to EnterMovies fails, QuickTime tells us so by returning a non-zero result code. The main reason that EnterMovies can fail is insufficient memory available for QuickTime to do the necessary initialization, so the result code is very likely to be memFullErr. No matter what the error here, however, our sample applications all quit pretty much immediately after they get one, first informing the user of the error. Listing 1 shows a portion of our application start-up code on the Macintosh.
Listing 1: Initializing the Movie Toolbox (Macintosh)
main myErr = EnterMovies(); if (myErr != noErr) { QTFrame_ShowWarning("\pCould not initialize QuickTime. Exiting.", myErr); ExitToShell(); }
And Listing 2 shows the corresponding code in our Windows applications.
Listing 2: Initializing the Movie Toolbox (Windows)
WinMain myErr = EnterMovies(); if (myErr != noErr) { MessageBox(NULL, "Could not initialize QuickTime. Exiting.", gAppName, MB_OK | MB_APPLMODAL); return(0); }
But a significant number of QuickTime functions do not return an error code as their function result. A good example is StartMovie, which is declared like this:
void StartMovie (Movie theMovie);
As you can see, StartMovie returns no function result at all. Some other functions do return function results but they are not of type OSErr. An example here is GetMovieActive, which returns a result of type Boolean:
Boolean GetMovieActive (Movie theMovie);
To handle cases like these, QuickTime provides a set of error-reporting functions. Let's see how these work.
Getting the Current Error
We can use the Movie Toolbox function GetMoviesError to retrieve the current error value (or current error), which is the result code of the most recently executed QuickTime function. GetMoviesError is declared like this:
OSErr GetMoviesError (void);
We can use GetMoviesError to get the result code for those functions that do not return one as their function result. (GetMoviesError also returns the result code for functions that do return an OSErr, but it's pretty much redundant in those cases.) Here's a typical use of GetMoviesError:
myTrack = NewMovieTrack(myMovie, myWidth, myHeight, 0); myErr = GetMoviesError(); if (myErr != noErr) goto bail;
We could just as easily have checked to see whether myTrack is equal to NULL after the call to NewMovieTrack, but calling GetMoviesError gives us a result code that we can return to our caller, if so desired.
It's worth noting that GetMoviesError (and GetMoviesStickyError, which we'll consider in a moment) are global to an application and are not thread-specific. This means that an error that occurs in one thread can be reported to another thread. (Just something to keep in mind if you are writing multi-threaded applications.)
Getting the Sticky Error
QuickTime also maintains an error value called the sticky error value (or sticky error), which is the first non-zero result code of a Movie Toolbox function that was generated since the last time the sticky error was cleared. We retrieve the sticky error value by calling GetMoviesStickyError and we clear the sticky error by calling ClearMoviesStickyError. Here are the function prototypes:
OSErr GetMoviesStickyError (void); void ClearMoviesStickyError (void);
When our application first starts up, the sticky error is 0. If all our Movie Toolbox function calls succeed, the sticky error remains set to 0. But as soon as any Movie Toolbox function encounters an error, the appropriate error value is copied into the sticky error value. We can call GetMoviesStickyError at any time to retrieve the sticky error value. This value does not change, even if subsequent Movie Toolbox calls fail, until we explicitly reset it to 0 by calling ClearMoviesStickyError.
The sticky error value is useful when we want to execute a series of Movie Toolbox functions but don't particularly want to check for errors after each Movie Toolbox call. Listing 3 shows a situation in which GetMoviesStickyError might be used. The function VRObject_ImportVideoTrack copies a video track from one movie (the source) into a second movie (the destination).
Listing 3: Importing a video track from one movie into another
VRObject_ImportVideoTrack OSErr VRObject_ImportVideoTrack (Movie theSrcMovie, Movie theDstMovie, Track *theImageTrack) { Track mySrcTrack = NULL; Media mySrcMedia = NULL; Track myDstTrack = NULL; Media myDstMedia = NULL; Fixed myWidth, myHeight; OSType myType; OSErr myErr = noErr; ClearMoviesStickyError(); // get the first video track in the source movie mySrcTrack = GetMovieIndTrackType(theSrcMovie, 1, VideoMediaType, movieTrackMediaType); if (mySrcTrack == NULL) return(paramErr); // get the track's media and dimensions mySrcMedia = GetTrackMedia(mySrcTrack); GetTrackDimensions(mySrcTrack, &myWidth, &myHeight); // create a destination track myDstTrack = NewMovieTrack(theDstMovie, myWidth, myHeight, GetTrackVolume(mySrcTrack)); // create a destination media GetMediaHandlerDescription(mySrcMedia, &myType, 0, 0); myDstMedia = NewTrackMedia(myDstTrack, myType, GetMediaTimeScale(mySrcMedia), 0, 0); // copy the entire track InsertTrackSegment(mySrcTrack, myDstTrack, 0, GetTrackDuration(mySrcTrack), 0); CopyTrackSettings(mySrcTrack, myDstTrack); SetTrackLayer(myDstTrack, GetTrackLayer(mySrcTrack)); // an object video track should always be enabled SetTrackEnabled(myDstTrack, true); if (theImageTrack != NULL) *theImageTrack = myDstTrack; return(GetMoviesStickyError()); }
As you can see, we call ClearMoviesStickyError at the beginning of this function and then return to our caller the value returned by GetMoviesStickyError. The idea here is that our caller will care only about the first error we encounter while executing this function, which will of course be the sticky error (since we cleared the sticky error at the beginning).
Another case where we may want to access the sticky error is when we know or suspect that a QuickTime function will report an error, but we don't really care about that error. Listing 4 defines a function, QTUtils_GetFrameCount, which returns the number of frames in a specified track. We use GetTrackNextInterestingTime to step through the track's samples.
Listing 4: Counting the frames in a track
QTUtils_GetFrameCount long QTUtils_GetFrameCount (Track theTrack) { long myCount = -1; short myFlags; TimeValue myTime = 0; OSErr myErr = noErr; if (theTrack == NULL) goto bail; myErr = GetMoviesStickyError(); // we want to begin with the first frame (sample) in the track myFlags = nextTimeMediaSample + nextTimeEdgeOK; while (myTime >= 0) { myCount++; // look for the next frame in the track; when there are no more frames, // myTime is set to -1, so we'll exit the while loop GetTrackNextInterestingTime(theTrack, myFlags, myTime, fixed1, &myTime, NULL); // after the first interesting time, don't include the time we're currently at myFlags = nextTimeStep; } if (myErr == noErr) ClearMoviesStickyError(); bail: return(myCount); }
GetTrackNextInterestingTime returns, in the sixth parameter, the first time value it finds that satisfies the search criteria specified in the flags parameter. When it cannot find a time value that satisfies those criteria, it sets that parameter to -1. For all we know, it's possible that GetTrackNextInterestingTime also sets an error value; if so, we want to clear that value by calling ClearMoviesStickyError (but only if the sticky error on entry to our function was noErr).
Error Notification Functions
QuickTime provides the SetMoviesErrorProc function, which we can use to install an error notification function (or, more briefly, error function). An error notification function is called whenever QuickTime encounters a non-zero result code during the execution of a Movie Toolbox function. SetMoviesErrorProc is declared like this:
void SetMoviesErrorProc (MoviesErrorUPP errProc, long refcon);
The first parameter is a universal procedure pointer to our custom error notification function; the second parameter is a 4-byte reference constant that is passed to our error function when it is called. The error notification function is declared like this:
void MyMoviesErrorProc (OSErr theErr, long theRefcon);
The first parameter is the non-zero result code that was just encountered, and the second parameter is the reference constant we specified when we called SetMoviesErrorProc.
An error notification function is useful during application development or debugging, as they provide a single location where all errors are reported. This keeps us from having to put breakpoints all through our code as we track down problems.
Mysterious Errors
While we're on the topic of retrieving errors in QuickTime-savvy applications, it's worth discussing an issue that trips people up occasionally. This is the issue of mysterious QuickTime errors like -32766, which can occur when we execute some code like this:
OSErr myErr = GraphicsExportSetDepth(myComponent, 32);
When this code is executed, then for certain graphics exporters, myErr is set to -32766. If we look in the file MacErrors.h, we won't find any such error. What's going on?
The explanation is surprisingly straightforward: GraphicsExportSetDepth and many other QuickTime functions that work with components return a function result of type ComponentResult, which is declared like this:
typedef long ComponentResult;
On the other hand, the OSErr data type is declared like this:
typedef SInt16 OSErr;
When we try to fit a ComponentResult into an OSErr, we get only the low-order 16 bits, interpreted as a signed value. When the ComponentResult is noErr, this truncation is unproblematic. But several component errors use the full 32 bits of the long word, in which case the truncation will give us the mysterious errors described above. In particular, if a component does not support a particular action, then it will return the value badComponentSelector, which is defined as 0x80008002. Truncating 0x80008002 to a 16-bit signed quantity gives us -32766. That's what's happening with the call to GraphicsExportSetDepth we just considered: the particular component specified by the myComponent parameter does not support setting the export bit depth, in which case it returns badComponentSelector.
The lesson here is simple: pay attention to the data type of a function's return value and make sure you have enough space to hold that value. More specifically: don't use a variable of type OSErr to hold the return value of a component-related function whose return value is of type ComponentResult. But don't feel bad if you slip up occasionally. This mix-up is in fact so common that the file MacErrors.h contains some helpful comments:
/* ComponentError codes*/ enum { badComponentInstance = (long)0x80008001, /* when cast to an OSErr this is -32767*/ badComponentSelector = (long)0x80008002 /* when cast to an OSErr this is -32766*/ };
A Framework Bug
Let's close this article by squashing a particularly nasty bug that I introduced into our sample applications a few months back, when we updated our Macintosh code to use Carbon events instead of "classic" events. (See "Event Horizon" in MacTech, May 2002.) Recall that we added a Carbon event loop timer to each open movie window, so that we can periodically task the movie controller (by calling MCIsPlayerEvent or MCIdle). Unfortunately, our existing application can crash -- at least on Mac OS 9 -- if we do something so simple as open a movie window and then later close it. That's not good.
Fixing the Bug
The problematic code turns out to be in the Macintosh version of the QTFrame_CreateMovieWindow function, shown in Listing 5. Here we create a new window and window object. Then we attach standard and custom Carbon event handlers to the window. Finally, we call InstallEventLoopTimer to attach a timer to the window.
Listing 5: Creating a movie window
QTFrame_CreateMovieWindow WindowReference QTFrame_CreateMovieWindow (void) { WindowReference myWindow = NULL; // create a new window to display the movie in myWindow = NewCWindow(NULL, &gWindowRect, gWindowTitle, false, noGrowDocProc, (WindowPtr)-1L, true, 0); // create a new window object associated with the new window QTFrame_CreateWindowObject(myWindow); #if USE_CARBON_EVENTS { EventTypeSpec myEventSpec[] = { {kEventClassKeyboard, kEventRawKeyDown}, {kEventClassKeyboard, kEventRawKeyRepeat}, {kEventClassKeyboard, kEventRawKeyUp}, {kEventClassWindow, kEventWindowUpdate}, {kEventClassWindow, kEventWindowDrawContent}, {kEventClassWindow, kEventWindowActivated}, {kEventClassWindow, kEventWindowDeactivated}, {kEventClassWindow, kEventWindowHandleContentClick}, {kEventClassWindow, kEventWindowClose} }; // install Carbon event handlers for this window InstallStandardEventHandler (GetWindowEventTarget(myWindow)); if (gWinEventHandlerUPP != NULL) InstallEventHandler(GetWindowEventTarget(myWindow), gWinEventHandlerUPP, GetEventTypeCount(myEventSpec), myEventSpec, QTFrame_GetWindowObjectFromWindow(myWindow), NULL); } if (gWinTimerHandlerUPP != NULL) InstallEventLoopTimer(GetMainEventLoop(), 0, TicksToEventTime(kWNEMinimumSleep), gWinTimerHandlerUPP, myWindowObject, &(**myWindowObject).fTimerRef); #endif return(myWindow); }
It turns out that InstallEventLoopTimer can move memory, which might invalidate its last parameter, &(**myWindowObject).fTimerRef. If the window object indeed moves, then InstallEventLoopTimer will write the timer reference into the previous location of the window object. That's bad enough, but it gets worse when you realize that the window object, in its new memory location, now won't contain the timer reference returned by InstallEventLoopTimer. Rather, (**myWindowObject).fTimerRef will still be NULL. The event loop timer indeed gets installed, but we don't have a reference to it.
This in itself isn't a problem until we try to remove the event loop timer when the window is closed. Here's the code we use to do that:
if ((**myWindowObject).fTimerRef != NULL) RemoveEventLoopTimer((**myWindowObject).fTimerRef);
Since (**myWindowObject).fTimerRef is indeed NULL, RemoveEventLoopTimer isn't called and the timer continues firing even after the movie window has disappeared. Listing 6 shows our event loop timer callback function.
Listing 6: Handling event loop timer callbacks
QTFrame_CarbonEventWindowTimer PASCAL_RTN void QTFrame_CarbonEventWindowTimer (EventLoopTimerRef theTimer, void *theRefCon) { #pragma unused(theTimer) WindowObject myWindowObject = (WindowObject)theRefCon; // just pretend a null event has been received.... if ((myWindowObject != NULL) && ((**myWindowObject).fController != NULL)) if (!gMenuIsTracking || gRunningUnderX) MCIdle((**myWindowObject).fController); }
If the window object has been disposed of, then reading any of its fields (in this case, fController) will likely result in a segmentation fault or other error.
This is a classic case of using a dangling pointer, the address of a block of memory whose contents have moved. You can get the full details on this type of problem in the book Inside Macintosh: Memory (which I am presently chagrined to admit I myself wrote a decade ago). There are several solutions to this type of problem. A standard solution is to lock the window object before calling InstallEventLoopTimer and then unlock it afterwards:
HLock((Handle)myWindowObject); if (gWinTimerHandlerUPP != NULL) InstallEventLoopTimer(GetMainEventLoop(), 0, TicksToEventTime(kWNEMinimumSleep), gWinTimerHandlerUPP, myWindowObject, &(**myWindowObject).fTimerRef); HUnlock((Handle)myWindowObject);
Or, even more simply, we can just use a temporary variable to hold the timer reference:
EventLoopTimerRef myTimerRef; if (gWinTimerHandlerUPP != NULL) InstallEventLoopTimer(GetMainEventLoop(), 0, TicksToEventTime(kWNEMinimumSleep), gWinTimerHandlerUPP, myWindowObject, &myTimerRef); (**myWindowObject).fTimerRef = myTimerRef;
Adding Some More Protections
Let's take this opportunity to tinker with the Carbon event loop timer callback function QTFrame_CarbonEventWindowTimer (Listing 6, above). First of all, we should add a check at the top of the function to make sure we got a non-NULL window object:
if (myWindowObject == NULL) return;
And we should make sure that we are passed the same timer reference we are storing in the window object:
if ((**myWindowObject).fTimerRef != theTimer) return;
More importantly, I want to change the call to MCIdle into a call to MCIsPlayerEvent. We can achieve this end by building a null event and passing it to our framework function QTFrame_HandleEvent, as shown in Listing 7.
Listing 7: Handling event loop timer callbacks (revised)
QTFrame_CarbonEventWindowTimer PASCAL_RTN void QTFrame_CarbonEventWindowTimer (EventLoopTimerRef theTimer, void *theRefCon) { WindowObject myWindowObject = (WindowObject)theRefCon; if (myWindowObject == NULL) return; // sanity check: make sure it's our timer if ((**myWindowObject).fTimerRef != theTimer) return; // just issue a null event to our event-handling routine.... if (!gMenuIsTracking || gRunningUnderX) { EventRecord myEvent; myEvent.what = nullEvent; myEvent.message = 0; myEvent.modifiers = 0; myEvent.when = EventTimeToTicks(GetCurrentEventTime()); QTFrame_HandleEvent(&myEvent); } }
I prefer this revised approach to tasking our movie controllers because it routes null events through our existing event-handling routine QTFrame_HandleEvent. This in turn will make it easier to modify our code to handle movies that need to be tasked but which don't yet have a movie controller attached to them. In the next article, we'll see how this can happen.
Conclusion
Of the four new QuickTime functions we've encountered in this article (GetMoviesError, GetMoviesStickyError, ClearMoviesStickyError, and SetMoviesErrorProc), we're most likely to want to use GetMoviesError in our daily programming, as it provides our only means of retrieving the result codes for a large number of QuickTime functions. I generally find the sticky error less useful, but there are times we might want to take a look at it. The error procedure is, to my knowledge, largely unused. I can, however, imagine that a clever programmer could find some useful applications for it, so it's good to at least know it exists.
Tim Monroe in a member of the QuickTime engineering team. You can contact him at monroe@apple.com. The views expressed here are not necessarily shared by his employer.
![](/file/12652/www.mactech.com.tar/www.mactech.com/sites/all/themes/custom_front/img/search_text.gif)
- SPREAD THE WORD:
- Slashdot
- Digg
- Del.icio.us
- Newsvine