![](/file/12652/www.mactech.com.tar/www.mactech.com/sites/all/themes/custom_front/images/you_are_here_red.gif)
![](/file/12652/www.mactech.com.tar/www.mactech.com/sites/default/files/beta-site.gif)
|
Volume Number: 18 (2002)
Issue Number: 06
Column Tag: QuickTime Toolkit
by Tim Monroe
Virtuosity
Programming with QuickTime VR
Introduction
QuickTime VR (or, more briefly, QTVR) is the part of QuickTime that allows users to interactively explore and examine photorealistic, three-dimensional virtual worlds and objects. A QuickTime VR movie is a collection of one or more nodes; each node is either a panoramic node (also known as a panorama) or an object node (also known as an object). Figure 1 shows a view of a sample panoramic node, and Figure 2 shows a view of an object node. (When a QuickTime VR movie consists of a single node, folks often refer to it as a panorama movie or an object movie, depending on the type of node it contains.)
![](/file/12652/www.mactech.com.tar/www.mactech.com/articles/mactech/Vol.18/18.06/Jun02QTToolkit/figure01.gif)
Figure 1: A QuickTime VR panorama
![](/file/12652/www.mactech.com.tar/www.mactech.com/articles/mactech/Vol.18/18.06/Jun02QTToolkit/figure02.gif)
Figure 2: A QuickTime VR object movie
QuickTime VR movies are managed by the QuickTime VR movie controller, a movie controller component that knows how to interpret user actions in a QuickTime VR movie. The QuickTime VR movie controller also displays a controller bar with buttons that are appropriate to QuickTime VR movies. From left to right, the five buttons allow the user to go back to the previous node, zoom out, zoom in, show the visible hot spots, and translate an object in the movie window. The QuickTime VR movie controller automatically disables any buttons that are not appropriate for the current node type or movie state. For instance, the back button is disabled in Figure 2 because the movie is a single-node movie. Similarly, the translate button is disabled in Figure 1 because the current node is a panoramic node, not an object node.
QuickTime has supported QuickTime VR movie creation and playback since mid-1995. In early 1997, Apple released QuickTime VR version 2.0, which (in addition to numerous other improvements) provided a C programming interface to QuickTime VR. This interface, called the QuickTime VR Manager, provides an extensive set of functions for controlling QuickTime VR movies. In this article, we’ll take a look at the QuickTime VR Manager.
The QuickTime VR movie controller also allows QuickTime VR movies to send and receive wired actions. This allows us, for instance, to use buttons in a Flash track to control a QTVR movie, as illustrated in Figure 3. Here the Flash buttons in the lower-left corner of the movie are configured to send the appropriate QuickTime wired actions to pan, tilt, or zoom the panorama. (We saw how to attach wired actions to Flash track buttons in “The Flash II: Revenge of the Trickster”, MacTech, February 2002.)
![](/file/12652/www.mactech.com.tar/www.mactech.com/articles/mactech/Vol.18/18.06/Jun02QTToolkit/figure03.gif)
Figure 3: A Flash track controlling a QuickTime VR movie
We’ll take a look at the actions that can be targeted at a QuickTime VR movie, and we’ll also see how to attach wired actions to elements in a QuickTime VR movie. We can attach wired actions to a particular node or to a particular hot spot in a node. So, for example, we could wire a hot spot to launch the user’s web browser and navigate to a particular web site when the user clicks that hot spot. Or we can have some actions triggered when the user enters a node. We won’t learn how to build QuickTime VR movies in this article, but we will need to understand some of the structure of these movies in order to learn how to attach wired actions to nodes and hot spots.
The QuickTime VR Manager
The QuickTime VR Manager provides a large number of capabilities that we can use to customize and extend the user’s virtual experience of panoramas and objects. Here we’ll summarize the basic capabilities of the QuickTime VR Manager. Then, in the following sections, we’ll illustrate how to use some of them. The QuickTime VR Manager provides these main capabilities:
- Positioning. A QuickTime VR movie file contains a scene, which is a collection of one or more nodes. Each node is uniquely identified by its node ID. Within a panoramic node, the user’s view is determined by three factors: the pan angle, the tilt angle, and the vertical field of view (sometimes also called the zoom angle). For objects, the view is also determined by the view center (the position of the center of the object in the movie window). The QuickTime VR Manager provides functions to get and set any of these items. For instance, we can programmatically spin an object around by repeatedly incrementing the current pan angle.
- Hot spot handling. We can use the QuickTime VR Manager to manage any hot spots in a panorama or object. For instance, we can trigger a hot spot programmatically (that is, simulate a click on the hot spot), enable and disable hot spots, determine whether the cursor is over a hot spot, find all visible hot spots, and so forth. We can also install a callback routine that is called whenever the cursor is over an enabled hot spot.
- Custom node-entering and -leaving behaviors. The QuickTime VR Manager allows us to perform actions whenever the user enters a new node or leaves the current node. For instance, we might use a node-entering procedure to play a sound when the user enters a particular node. Or, we can use a node-leaving procedure to prevent the user from leaving a node until some task has been accomplished.
- Getting information. We can use the QuickTime VR Manager to get information about a scene or about a specific node. For instance, we might want to determine the ID and type of the current node. Much of the information about scenes and nodes is stored in atoms in the movie file. To get information about a scene or node that isn’t provided directly by the QuickTime VR Manager, we’ll need to use the QuickTime atom container functions to extract information from those atoms.
- Intercepting QuickTime VR Manager functions. We can intercept calls to some QuickTime VR Manager functions in order to augment or modify their behavior. For example, to assign behaviors to custom hot spots, we can install an intercept routine that is called whenever a hot spot is triggered. Our intercept routine might check the type of the triggered hot spot and then perform the actions appropriate for that type. Another common use of intercept routines is to intercept positioning functions (changing the pan, tilt, and field of view) and adjust environmental factors accordingly. For instance, we can adjust the balance and volume of a sound as the pan angle changes in a panorama, thereby making it appear that the sound is localized within the panorama.
- Accessing the prescreen buffer. QuickTime VR maintains an offscreen buffer for each panorama, called the prescreen buffer. The prescreen buffer contains the image that is about to be copied to the screen. We can use QuickTime VR Manager functions to access the prescreen buffer, perhaps to draw a graphic image over the panorama.
This list is not exhaustive. The QuickTime VR Manager provides many other capabilities as well. For a complete description, see the technical documentation cited at the end of this article.
QuickTime VR Movie Playback
Our existing sample applications, such as QTShell, are already able to open and display QuickTime VR movies. The QuickTime VR movie controller handles the basic click-and-drag navigation, keyboard input, and controller bar events. We need to use the QuickTime VR Manager only if we want to exploit some of the capabilities described just above.
Initializing the QuickTime VR Manager
Before we can call the QuickTime VR Manager, however, we need to do a little setting up (over and above what’s required for using QuickTime). First, we need to ensure that the QuickTime VR Manager is available in the current operating environment. There are several Gestalt selectors that we can use to see whether the QuickTime VR Manager is available and what features it has. Listing 1 shows the definition of the QTVRUtils_IsQTVRMgrInstalled function, which indicates whether the QuickTime VR Manager is available in the current operating environment.
Listing 1: Determining whether the QuickTime VR Manager is available
QTVRUtils_IsQTVRMgrInstalled Boolean QTVRUtils_IsQTVRMgrInstalled (void) { Boolean myQTVRAvail = false; long myAttrs; OSErr myErr = noErr; myErr = Gestalt(gestaltQTVRMgrAttr, &myAttrs); if (myErr == noErr) if (myAttrs & (1L << gestaltQTVRMgrPresent)) myQTVRAvail = true; return(myQTVRAvail); }
For simplicity, we’ll introduce a global variable to keep track of whether the QuickTime VR Manager is available:
gQTVRMgrIsPresent = QTVRUtils_IsQTVRMgrInstalled(); On Windows operating systems, we need to call the InitializeQTVR function to initialize the QuickTime VR Manager, like this: #if TARGET_OS_WIN32 InitializeQTVR(); #endif
We also need to close our connection to the QuickTime VR Manager before our application terminates:
#if TARGET_OS_WIN32 TerminateQTVR(); #endif
Calling any other QuickTime VR Manager functions before calling InitializeQTVR will result in an error on Windows.
Getting the QTVR Instance
The QuickTime VR Manager keeps track of QuickTime VR movies using an identifier called a QTVR instance (of data type QTVRInstance). Virtually all QuickTime VR Manager functions operate on QTVR instances. You can think of an instance as representing a scene — that is, a collection of nodes — or sometimes just the current node. We obtain a QTVR instance by calling the QTVRGetQTVRInstance function. QTVRGetQTVRInstance takes a reference to a QTVR track, which we can obtain by calling QTVRGetQTVRTrack. Listing 2 shows our definition of QTApp_SetupWindowObject, which we call for every movie we open.
Listing 2: Getting a QTVR instance
QTApp_SetupWindowObject void QTApp_SetupWindowObject (WindowObject theWindowObject) { Track myQTVRTrack = NULL; Movie myMovie = NULL; MovieController myMC = NULL; QTVRInstance myInstance = NULL; if (theWindowObject == NULL) return; // make sure we can safely call the QTVR API if (!gQTVRMgrIsPresent) return; // find the QTVR track, if there is one myMC = (**theWindowObject).fController; myMovie = (**theWindowObject).fMovie; myQTVRTrack = QTVRGetQTVRTrack(myMovie, 1); QTVRGetQTVRInstance(&myInstance, myQTVRTrack, myMC); (**theWindowObject).fInstance = myInstance; // do any QTVR window configuration if (myInstance != NULL) { // set unit to radians QTVRSetAngularUnits(myInstance, kQTVRRadians); } }
Notice that we keep track of the QTVR instance by storing it in the fInstance field of the window object associated with the movie (here, theWindowObject). This gives us an easy way to determine whether a given movie window contains a QuickTime VR movie. Notice also that we call the QTVRSetAngularUnits function to set our preferred angular units to radians. The QuickTime VR Manager can work with either degrees or radians when specifying angular measurements (for instance, when we call QTVRGetPanAngle). The default angular unit type is degrees. Internally, the QuickTime VR Manager always uses radians, and in some situations it gives us measurements in radians no matter what the current angular unit. In general, therefore, I find it easier to work in radians most of the time, so I’ve reset the angular unit type to radians. (Your preference may vary.) We can define some simple macros to allow us to convert between degrees and radians:
#define kVRPi ((float)3.1415926535898) #define kVR2Pi ((float)(2.0 * 3.1415926535898)) #define QTVRUtils_DegreesToRadians(x) \ ((float)((x) * kVRPi / 180.0)) #define QTVRUtils_RadiansToDegrees(x) \ ((float)((x) * 180.0 / kVRPi))
We don’t need to explicitly release or dispose of a QTVR instance; the value we obtain by calling QTVRGetQTVRInstance remains valid until we dispose of the associated movie controller.
Controlling View Angles
Finally we’re ready to use the QuickTime VR Manager to do some real work. The most basic way to use the API is to control the view angles of a node — the pan, tilt, and field of view angles. Listing 3 defines a function that gradually increments the pan angle through 360 degrees. With panoramas, this has the effect of making the user seem to spin a full circle (as if the user were spinning on a rotating stool). With objects, this has the effect of making the object spin around a full circle (as if the object were spinning on a turntable).
Listing 3: Spinning a node around once
SpinAroundOnce void SpinAroundOnce (QTVRInstance theInstance) { float myOrigPanAngle, myCurrPanAngle; myOrigPanAngle = QTVRGetPanAngle(theInstance); for (myCurrPanAngle = myOrigPanAngle; myCurrPanAngle <= myOrigPanAngle + kVR2Pi; myCurrPanAngle += QTVRUtils_DegreesToRadians(10.0)) { QTVRSetPanAngle(theInstance, myCurrPanAngle); QTVRUpdate(theInstance, kQTVRCurrentMode); } }
The idea here is simple: get the starting pan angle (by calling QTVRGetPanAngle) and then repeatedly increment the pan angle by a certain amount (here, 10 degrees) until a full circle has been traversed. Note that we need to call the QTVRUpdate function after we set a new pan angle to make sure the updated view is displayed on the screen.
Drawing on a Panorama
Suppose we want to draw a logo or other graphic element on top of a panorama (as seems to be in vogue on broadcast television channels these days). As we learned earlier, we can draw into a panorama’s prescreen buffer before that buffer is copied to the screen. (Object nodes don’t have prescreen buffers, so this technique won’t work for those kinds of nodes.) We exploit this capability by installing a prescreen buffer imaging completion procedure, which is called by the QuickTime VR Manager each time the prescreen buffer is about to be copied to the screen. We install our procedure using the QTVRSetPrescreenImagingCompleteProc function:
ImagingCompleteUPP myImagingProc; myImagingProc = NewImagingCompleteProc(MyPrescreenRoutine); QTVRSetPrescreenImagingCompleteProc(myInstance, myImagingProc, (SInt32)theWindowObject, 0);
The QTVRSetPrescreenImagingCompleteProc function takes four parameters, which are the QTVR instance, a universal procedure pointer to the imaging complete procedure, a four-byte reference constant, and four-byte flags parameter. In this case, we pass the window object reference as the third parameter so that the imaging complete procedure can access any data associated with the window.
Our prescreen buffer imaging completion procedure is called after QuickTime VR has finished drawing into the prescreen buffer. When it’s called, the current graphics port is set to the prescreen buffer. All we need to do is draw a picture at the appropriate spot, as shown in Listing 4.
Listing 4: Drawing a picture on top of a panorama
MyPrescreenRoutine pascal OSErr MyPrescreenRoutine (QTVRInstance theInstance, WindowObject theWindowObject) { #pragma unused(theInstance) ApplicationDataHdl myAppData; Rect myMovieRect; Rect myPictRect; // get the application-specific data associated with the window myAppData = (ApplicationDataHdl) GetAppDataFromWindowObject(theWindowObject); if (myAppData == NULL) return(paramErr); // if there is no picture to display, just return if ((**myAppData).fPicture == NULL) return(noErr); // get the current size of the movie GetMovieBox((**theWindowObject).fMovie, &myMovieRect); // set the size and position of the overlay rectangle MacSetRect(&myPictRect, 0, 0, 32, 32); MacOffsetRect(&myPictRect, myMovieRect.right - (myPictRect.right + 5), myMovieRect.bottom - (myPictRect.bottom + 5)); // draw the picture DrawPicture((**myAppData).fPicture, &myPictRect); return(noErr); }
There’s nothing very complicated in this prescreen buffer imaging completion procedure. Essentially, it just figures out where in the buffer to draw the picture and then draws it. We assume that a handle to the picture data is stored in the fPicture field of the application data record.
Intercepting QuickTime VR Manager Functions
Suppose we want to play a sound every time the user clicks on (that is, triggers) a hot spot. The easiest way to do this is to install an intercept procedure that is called each time a hot spot is triggered. The intercept procedure simply plays the sound and then returns, whereupon QuickTime VR processes the hot spot click as usual. Listing 5 shows a simple hot spot triggering intercept procedure.
Listing 5: Playing a sound on hot spot clicks
MyInterceptRoutine pascal void MyInterceptRoutine ( QTVRInstance theInstance, QTVRInterceptPtr theMsg, WindowObject theWindowObject, Boolean *cancel) { #pragma unused(theInstance, theWindowObject) Boolean myCancelInterceptedProc = false; switch (theMsg->selector) { case kQTVRTriggerHotSpotSelector: MyPlaySound(); break; } *cancel = myCancelInterceptedProc; }
An intercept routine is executed whenever the intercepted routine is called, either programmatically or by a user action. On entry, the QuickTime VR Manager provides three pieces of information: the relevant QTVR instance, a pointer to an intercept record, and an application-defined reference constant, which we use here to pass in the window object. The intercept record (pointed to by the theMsg parameter) has this structure:
struct QTVRInterceptRecord { SInt32 reserved1; SInt32 selector; SInt32 reserved2; SInt32 reserved3; SInt32 paramCount; void *parameter[6]; }
For present purposes, we need to inspect only the selector field, which contains a value that indicates which intercepted routine is being called. As you can see in Listing 5, we look for any calls to QTVRTriggerHotSpot and call the application-defined function MyPlaySound when we get one.
We install an intercept procedure by calling the QTVRInstallInterceptProc function, as shown in Listing 6.
Listing 6: Installing an intercept routine
MyInstallInterceptRoutine void MyInstallInterceptRoutine ( QTVRInstance theInstance, WindowObject theWindowObject) { QTVRInterceptUPP myInterceptProc; myInterceptProc = NewQTVRInterceptProc(MyInterceptRoutine); QTVRInstallInterceptProc(theInstance, kQTVRTriggerHotSpotSelector, myInterceptProc, (SInt32)theWindowObject, 0); }
The QuickTime VR File Format
Unlike movies containing other interactive media types (such as sprite or Flash) where the media data can be stored in a single track, a QuickTime VR movie always contains several tracks. A panorama movie, for instance, contains a panorama image track (which holds the image data for the panorama), a panorama track (which contains information about the panoramic node), and a QTVR track (which maintains general information about the movie, such as the default imaging properties). Similarly, an object movie contains an object image track (which holds the image data for the object), an object track (which contains information about the object node), and a QTVR track. For multi-node movies, the QTVR track also contains a list of the nodes in the movie and an indication of which node is the default node. Movies with hot spots also contain a hot spot image track (a video track where the hot spots are designated by colored regions).
Usually this structure is important to us only when we want to create a QuickTime VR movie. But it’s also useful when we want to alter an existing QuickTime VR movie or to extract information not provided by the available QuickTime VR Manager functions.
Working with Node Information
A QTVR track maintains general information about a QuickTime VR movie. Each individual sample in the QTVR track’s media is an atom container called a node information atom container. This atom container holds a node header atom, which contains information about a single node, such as the node’s type, ID, and name. The node information atom container can also hold a hot spot parent atom if the node has any hot spots in it. The QuickTime VR Manager provides the QTVRGetNodeInfo function that we can use to get a copy of a particular node information atom container or of any of its children. Listing 7 defines a function that we can use to get a copy of a node header atom for a specified node ID.
Listing 7: Finding the node header atom data
QTVRUtils_GetNodeHeaderAtomData OSErr QTVRUtils_GetNodeHeaderAtomData (QTVRInstance theInstance, UInt32 theNodeID, QTVRNodeHeaderAtomPtr theNodeHdrPtr) { QTAtomContainer myNodeInfo; QTAtom myAtom; OSErr myErr = noErr; // get the node information atom container for the specified node myErr = QTVRGetNodeInfo(theInstance, theNodeID, &myNodeInfo); if (myErr != noErr) return(myErr); // get the single node header atom in the node information atom container myAtom = QTFindChildByID(myNodeInfo, kParentAtomIsContainer, kQTVRNodeHeaderAtomType, 1, NULL); if (myAtom != 0) myErr = QTCopyAtomDataToPtr(myNodeInfo, myAtom, false, sizeof(QTVRNodeHeaderAtom), theNodeHdrPtr, NULL); else myErr = cannotFindAtomErr; QTDisposeAtomContainer(myNodeInfo); return(myErr); }
As you can see, we call QTVRGetNodeInfo to get the node information atom container for the specified node ID; then we call QTFindChildByID to find the single node header atom inside that container. If we find that atom, we call QTCopyAtomDataToPtr to make a copy of its data. A node header atom has this structure:
struct QTVRNodeHeaderAtom { UInt16 majorVersion; UInt16 minorVersion; OSType nodeType; QTAtomID nodeID; QTAtomID nameAtomID; QTAtomID commentAtomID; UInt32 reserved1; UInt32 reserved2; };
Listing 8 defines the function QTVRUtils_GetNodeType, which reads the nodeType field of a node header atom to determine the node type. (In fact, the QuickTime VR Manager provides the QTVRGetNodeType function to get a node’s type; we present QTVRUtils_GetNodeType simply to show another way of getting that information.)
Listing 8: Getting a node type
QTVRUtils_GetNodeType OSErr QTVRUtils_GetNodeType (QTVRInstance theInstance, UInt32 theNodeID, OSType *theNodeType) { QTVRNodeHeaderAtom myNodeHeader; OSErr myErr = noErr; // make sure we always return some meaningful value *theNodeType = kQTVRUnknownType; // get the node header atom data myErr = QTVRUtils_GetNodeHeaderAtomData(theInstance, theNodeID, &myNodeHeader); if (myErr == noErr) *theNodeType = EndianU32_BtoN(myNodeHeader.nodeType); return(myErr); }
There is no need to deallocate the block of data returned by QTVRUtils_GetNodeHeaderAtomData because it is allocated on the stack in a local variable.
Working with a VR World
All samples in a QTVR track use a single sample description. The data field of that sample description holds a VR world atom container, which holds general information about the scene contained in the QuickTime VR movie, including the name of the entire scene, the default node ID, and the default imaging properties. We can use the QTVRGetVRWorld function to retrieve a copy of a movie’s VR world atom container. Listing 9 illustrates how to use this function.
Listing 9: Finding the VR world atom data
QTVRUtils_GetVRWorldHeaderAtomData OSErr QTVRUtils_GetVRWorldHeaderAtomData (QTVRInstance theInstance, QTVRWorldHeaderAtomPtr theVRWorldHdrAtomPtr) { QTAtomContainer myVRWorld; QTAtom myAtom; OSErr myErr = noErr; // get the VR world myErr = QTVRGetVRWorld(theInstance, &myVRWorld); if (myErr != noErr) return(myErr); // get the single VR world header atom in the VR world myAtom = QTFindChildByIndex(myVRWorld, kParentAtomIsContainer, kQTVRWorldHeaderAtomType, 1, NULL); if (myAtom != 0) myErr = QTCopyAtomDataToPtr(myVRWorld, myAtom, false, sizeof(QTVRWorldHeaderAtom), theVRWorldHdrAtomPtr, NULL); else myErr = cannotFindAtomErr; QTDisposeAtomContainer(myVRWorld); return(myErr); }
A VR world atom container contains (perhaps among other things) a single VR world header atom, whose structure is defined by the QTVRWorldHeaderAtom data type:
struct QTVRWorldHeaderAtom { UInt16 majorVersion; UInt16 minorVersion; QTAtomID nameAtomID; UInt32 defaultNodeID; UInt32 vrWorldFlags; UInt32 reserved1; UInt32 reserved2; };
We can use this information to determine the node ID of a scene’s default node, as shown in Listing 10.
Listing 10: Finding a scene’s default node
QTVRUtils_GetDefaultNodeID UInt32 QTVRUtils_GetDefaultNodeID (QTVRInstance theInstance) { QTVRWorldHeaderAtom myVRWorldHeader; UInt32 myNodeID = kQTVRCurrentNode; OSErr myErr = noErr; myErr = QTVRUtils_GetVRWorldHeaderAtomData(theInstance, &myVRWorldHeader); if (myErr == noErr) myNodeID = EndianU32_BtoN(myVRWorldHeader.defaultNodeID); return(myNodeID); }
QTVRUtils_GetDefaultNodeID can be useful if we need to know the ID of a movie’s default node, since there is no QuickTime VR Manager function that returns this information directly.
Wired Actions and QuickTime VR
In a handful of recent articles, we’ve seen how to work with QuickTime wired actions in conjunction with sprite tracks, text tracks, and Flash tracks. We use wired actions to attach dynamic, interactive behaviors to elements in a QuickTime movie and to allow different elements in those movies (and indeed in different movies) to communicate with one another. In this section, we’ll investigate how to work with wired actions and QuickTime VR movies.
Sending Actions to QuickTime VR Movies
Let’s begin by taking a look at the wired actions that can be targeted at a QuickTime VR movie. When action wiring was first introduced, in QuickTime 3, these five wired actions were supported:
enum { kActionQTVRSetPanAngle = 4096, kActionQTVRSetTiltAngle = 4097, kActionQTVRSetFieldOfView = 4098, kActionQTVRShowDefaultView = 4099, kActionQTVRGoToNodeID = 4100 };
The first three actions allow us to set a new pan angle, tilt angle, or field of view in a QuickTime VR movie. Each of these actions takes a single parameter, a value of type float that specifies the desired new angle. This value should be specified in degrees (not radians) and is by default an absolute angle to pan, tilt, or zoom to. It’s often useful to specify a relative value instead; we can indicate that the parameter value is relative by inserting into the action atom an atom of type kActionFlags whose atom data is a long integer with (at least) the kActionFlagActionIsDelta flag set. Listing 11 shows how we can build an atom container holding a wired atom that pans the target QuickTime VR movie one degree to the left each time it gets an idle event. (We’ll see later how to make sure the movie is sent idle events.)
Listing 11: Panning a QuickTime VR movie during idle events
AddVRAct_CreateIdleActionContainer static OSErr AddVRAct_CreateIdleActionContainer (QTAtomContainer *theActions) { QTAtom myEventAtom = 0; QTAtom myActionAtom = 0; long myAction; float myPanAngle = 1.0; UInt32 myFlags; OSErr myErr = noErr; myErr = QTNewAtomContainer(theActions); if (myErr != noErr) goto bail; myErr = QTInsertChild(*theActions, kParentAtomIsContainer, kQTEventIdle, 1, 1, 0, NULL, &myEventAtom); if (myErr != noErr) goto bail; myErr = QTInsertChild(*theActions, myEventAtom, kAction, 1, 1, 0, NULL, &myActionAtom); if (myErr != noErr) goto bail; myAction = EndianS32_NtoB(kActionQTVRSetPanAngle); myErr = QTInsertChild(*theActions, myActionAtom, kWhichAction, 1, 1, sizeof(long), &myAction, NULL); if (myErr != noErr) goto bail; AddVRAct_ConvertFloatToBigEndian(&myPanAngle); myErr = QTInsertChild(*theActions, myActionAtom, kActionParameter, 1, 1, sizeof(float), &myPanAngle, NULL); if (myErr != noErr) goto bail; myFlags = EndianU32_NtoB(kActionFlagActionIsDelta | kActionFlagParameterWrapsAround); myErr = QTInsertChild(*theActions, myActionAtom, kActionFlags, 1, 1, sizeof(UInt32), &myFlags, NULL); bail: return(myErr); }
The action kActionQTVRShowDefaultView sets the current node to its default view (that is, the view that is displayed when the node is first entered). The kActionQTVRGoToNodeID action takes a single parameter that specifies a node ID; when the action is executed, the node with that ID becomes the current node. QuickTime 3 also introduced four wired action operands, which we can use to get information about the current state of a QuickTime VR movie:
enum { kOperandQTVRPanAngle = 4096, kOperandQTVRTiltAngle = 4097, kOperandQTVRFieldOfView = 4098, kOperandQTVRNodeID = 4099 };
QuickTime 5 added three more actions that we can send to a QuickTime VR movie:
enum { kActionQTVREnableHotSpot = 4101, kActionQTVRShowHotSpots = 4102, kActionQTVRTranslateObject = 4103 };
The kActionQTVREnableHotSpot action enables or disables a hot spot. This action requires two parameters, a long integer that specifies a hot spot ID and a Boolean value that specifies whether to enable (true) or disable (false) the hot spot. The kActionQTVRShowHotSpots action shows or hides all hot spots in a node, depending on the Boolean value in the parameter atom. The kActionQTVRTranslateObject action sets the view center of an object node to the values specified in the action’s two parameters. To allow us to retrieve the current hot spot visibility state and the current view center, QuickTime 5 introduced three additional operands:
enum { kOperandQTVRHotSpotsVisible = 4100, kOperandQTVRViewCenterH = 4101, kOperandQTVRViewCenterV = 4102 };
There is currently no operand that will allow us to determine whether a particular hot spot is enabled.
Adding Actions to QuickTime VR Movies
We can add two kinds of wired actions to QuickTime VR movies: (1) actions that are associated with a particular node and (2) actions that are associated with a particular hot spot in a node. Examples of node-specific actions are setting the pan and tilt angles when the user first enters the node and performing some actions periodically when the movie gets an idle event. An example of a hot-spot-specific action might be playing a sound when the cursor is moved over a hot spot.
All QuickTime VR wired actions are attached to a particular node, so the atom containers holding the actions are placed in the node information atom container that is contained in the media sample for that node in the QTVR track. So, our job here boils down to finding a media sample in the QTVR track, constructing some atom containers for our desired actions, placing those action containers into the appropriate places in the media sample, and then writing the modified media sample back into the QTVR track. We’ll also need to put an atom into the media property atom container of the QTVR track to enable wired action and idle event processing.
Adding Actions to a Hot Spot
Let’s begin by seeing how to attach some wired actions to a particular hot spot in a node. Let’s suppose that we know both the node ID and the hot spot ID, and that we have already constructed the atom container that holds the wired actions. Recall that a QTVR track contains one media sample for each node in the movie and that that media sample is a node information atom container. For simplicity, we’ll assume that we want to wire a hot spot in a single-node QuickTime VR movie. As a result, we can get the media sample by calling GetMediaSample, like this:
GetMediaSample(myMedia, mySample, 0, NULL, myMediaTime, NULL, &mySampleDuration, (SampleDescriptionHandle)myQTVRDesc, NULL, 1, NULL, &mySampleFlags);
If GetMediaSample returns successfully, then mySample will be the atom container that holds the atoms we want to modify.
At this point, we’ll call an application function AddVRAct_SetWiredActionsToHotSpot to add our wired actions to the specified hot spot:
AddVRAct_SetWiredActionsToHotSpot(mySample, myHotSpotID, myActions);
The first thing we need to do in AddVRAct_SetWiredActionsToHotSpot is find the hot spot parent atom inside the node information atom container:
myHotSpotParentAtom = QTFindChildByIndex(theSample, kParentAtomIsContainer, kQTVRHotSpotParentAtomType, 1, NULL);
A hot spot parent atom contains a hot spot atom (of type kQTVRHotSpotAtomType) for each hot spot in the node. The ID of the hot spot atom is the same as the ID of the hot spot, so we can find the appropriate hot spot atom like this:
myHotSpotAtom = QTFindChildByID(theSample, myHotSpotParentAtom, kQTVRHotSpotAtomType, theHotSpotID, NULL);
We add wired actions to a hot spot by inserting an event atom (that is, an atom of type kQTEventType) into the hot spot atom:
QTInsertChildren(theSample, myHotSpotAtom, theActions);
Listing 12 shows our complete definition of AddVRAct_SetWiredActionsToHotSpot.
Listing 12: Adding wired actions to a hot spot
AddVRAct_SetWiredActionsToHotSpot static OSErr AddVRAct_SetWiredActionsToHotSpot (Handle theSample, long theHotSpotID, QTAtomContainer theActions) { QTAtom myHotSpotParentAtom = 0; QTAtom myHotSpotAtom = 0; short myCount, myIndex; OSErr myErr = paramErr; myHotSpotParentAtom = QTFindChildByIndex(theSample, kParentAtomIsContainer, kQTVRHotSpotParentAtomType, 1, NULL); if (myHotSpotParentAtom == NULL) goto bail; myHotSpotAtom = QTFindChildByID(theSample, myHotSpotParentAtom, kQTVRHotSpotAtomType, theHotSpotID, NULL); if (myHotSpotAtom == NULL) goto bail; // see how many events are already associated with the specified hot spot myCount = QTCountChildrenOfType(theSample, myHotSpotAtom, kQTEventType); for (myIndex = myCount; myIndex > 0; myIndex--) { QTAtom myTargetAtom = 0; // remove all the existing events myTargetAtom = QTFindChildByIndex(theSample, myHotSpotAtom, kQTEventType, myIndex, NULL); if (myTargetAtom != 0) { myErr = QTRemoveAtom(theSample, myTargetAtom); if (myErr != noErr) goto bail; } } if (theActions) { myErr = QTInsertChildren(theSample, myHotSpotAtom, theActions); if (myErr != noErr) goto bail; } bail: return(myErr); }
You’ll notice that we look to see whether the hot spot atom already contains any event atoms; if so, we remove them from the hot spot atom. This ensures that the event atom we pass to AddVRAct_SetWiredActionsToHotSpot is the only one in the hot spot atom.
Adding Actions to a Node
We add wired actions to a node by inserting children into the node information atom container for that node. The type of a child atom for a wired action should be the same as the event type, and the ID should be 1. Listing 13 defines the AddVRAct_SetWiredActionsToNode function, which we use to add a wired atom to a particular node. The first parameter is assumed to be the node information atom container.
Listing 13: Adding wired actions to a node
AddVRAct_SetWiredActionsToNode static OSErr AddVRAct_SetWiredActionsToNode (Handle theSample, QTAtomContainer theActions, UInt32 theActionType) { QTAtom myEventAtom = 0; QTAtom myTargetAtom = 0; OSErr myErr = noErr; // look for an event atom in the specified actions atom container if (theActions != NULL) myEventAtom = QTFindChildByID(theActions, kParentAtomIsContainer, theActionType, 1, NULL); // look for an event atom in the node information atom container myTargetAtom = QTFindChildByID(theSample, kParentAtomIsContainer, theActionType, 1, NULL); if (myTargetAtom != 0) { // if there is already an event atom in the node information atom container, // then either replace it with the one we were passed or remove it if (theActions != NULL) myErr = QTReplaceAtom(theSample, myTargetAtom, theActions, myEventAtom); else myErr = QTRemoveAtom(theSample, myTargetAtom); } else { // there is no event atom in the node information atom container, // so add in the one we were passed if (theActions != NULL) myErr = QTInsertChildren(theSample, kParentAtomIsContainer, theActions); } return(myErr); }
We can add an idle event handler to a node like this:
AddVRAct_SetWiredActionsToNode(mySample, myActions, kQTEventIdle);
And we can add a frame-loaded event handler to a node like this:
AddVRAct_SetWiredActionsToNode(mySample, myActions, kQTEventFrameLoaded);
Other event types (such as kQTEventMouseClick or kQTEventKey) might not make sense for a node-based wired action.
Updating the Media Property Atom
When we added some wiring to a sprite track, we needed to include in the track’s media property atom an atom of type kSpriteTrackPropertyHasActions whose atom data is set to true. (See “Wired”, in MacTech, May 2001.) This atom tells the movie controller that the sprite track has wiring associated with it. If, in addition, any of the wired sprites employs the kQTEventIdle event, we also need to add an atom of type kSpriteTrackPropertyQTIdleEventsFrequency whose atom data indicates the desired idle event frequency, in ticks. We need to add these same atoms to the media property atom when we wire a QuickTime VR movie. Listing 14 defines the function AddVRAct_WriteMediaPropertyAtom, which we use to add the appropriate atoms.
Listing 14: Adding atoms to the media property atom
AddVRAct_WriteMediaPropertyAtom static OSErr AddVRAct_WriteMediaPropertyAtom (Media theMedia, long thePropertyID, long thePropertySize, void *theProperty) { QTAtomContainer myPropertyAtom = NULL; QTAtom myAtom = 0; OSErr myErr = noErr; // get the current media property atom myErr = GetMediaPropertyAtom(theMedia, &myPropertyAtom); if (myErr != noErr) goto bail; // if there isn’t one yet, then create one if (myPropertyAtom == NULL) { myErr = QTNewAtomContainer(&myPropertyAtom); if (myErr != noErr) goto bail; } // see if there is an existing atom of the specified type; if not, then create one myAtom = QTFindChildByID(myPropertyAtom, kParentAtomIsContainer, thePropertyID, 1, NULL); if (myAtom == NULL) { myErr = QTInsertChild(myPropertyAtom, kParentAtomIsContainer, thePropertyID, 1, 0, 0, NULL, &myAtom); if ((myErr != noErr) || (myAtom == NULL)) goto bail; } // set the data of the specified atom to the data passed in myErr = QTSetAtomData(myPropertyAtom, myAtom, thePropertySize, (Ptr)theProperty); if (myErr != noErr) goto bail; // write the new atom data out to the media property atom myErr = SetMediaPropertyAtom(theMedia, myPropertyAtom); bail: if (myPropertyAtom != NULL) myErr = QTDisposeAtomContainer(myPropertyAtom); return(myErr); }
To indicate that the QuickTime VR movie has wired actions embedded in it, we can call AddVRAct_WriteMediaPropertyAtom like this:
myHasActions = true; AddVRAct_WriteMediaPropertyAtom(myMedia, kSpriteTrackPropertyHasActions, sizeof(Boolean), &myHasActions);
And we can set the idle frequency like this:
myFrequency = EndianU32_NtoB(30); AddVRAct_WriteMediaPropertyAtom(myMedia, kSpriteTrackPropertyQTIdleEventsFrequency, sizeof(UInt32), &myFrequency);
Saving the Modified Media Data
So far, we’ve added some wired atoms to a node information atom container or to a hot spot atom inside of a node information atom container, and we’ve updated the media property atom of the QTVR track. To save these changes, we need to replace the appropriate sample in the QTVR track media and then update the movie atom. Listing 15 shows the complete definition of the AddVRAct_AddWiredActionsToQTVRMovie function, which we use to wire a QuickTime VR movie.
Listing 15: Adding wired actions to a QuickTime VR movie
AddVRAct_AddWiredActionsToQTVRMovie static void AddVRAct_AddWiredActionsToQTVRMovie (FSSpec *theFSSpec) { short myResID = 0; short myResRefNum = -1; Movie myMovie = NULL; Track myTrack = NULL; Media myMedia = NULL; TimeValue myTrackOffset; TimeValue myMediaTime; TimeValue mySampleDuration; TimeValue mySelectionDuration; TimeValue myNewMediaTime; QTVRSampleDescriptionHandle myQTVRDesc = NULL; Handle mySample = NULL; short mySampleFlags; Fixed myTrackEditRate; QTAtomContainer myActions = NULL; Boolean myHasActions; long myHotSpotID = 0L; UInt32 myFrequency; OSErr myErr = noErr; // open the movie file and get the QTVR track from the movie // open the movie file for reading and writing myErr = OpenMovieFile(theFSSpec, &myResRefNum, fsRdWrPerm); if (myErr != noErr) goto bail; myErr = NewMovieFromFile(&myMovie, myResRefNum, &myResID, NULL, newMovieActive, NULL); if (myErr != noErr) goto bail; // find the first QTVR track in the movie; myTrack = GetMovieIndTrackType(myMovie, 1, kQTVRQTVRType, movieTrackMediaType); if (myTrack == NULL) goto bail; // get the first media sample in the QTVR track myMedia = GetTrackMedia(myTrack); if (myMedia == NULL) goto bail; myTrackOffset = GetTrackOffset(myTrack); myMediaTime = TrackTimeToMediaTime(myTrackOffset, myTrack); // allocate some storage to hold the sample description for the QTVR track myQTVRDesc = (QTVRSampleDescriptionHandle)NewHandle(4); if (myQTVRDesc == NULL) goto bail; mySample = NewHandle(0); if (mySample == NULL) goto bail; myErr = GetMediaSample(myMedia, mySample, 0, NULL, myMediaTime, NULL, &mySampleDuration, (SampleDescriptionHandle)myQTVRDesc, NULL, 1, NULL, &mySampleFlags); if (myErr != noErr) goto bail; // add idle actions // create an action container for idle actions myErr = AddVRAct_CreateIdleActionContainer(&myActions); if (myErr != noErr) goto bail; // add idle actions to sample myErr = AddVRAct_SetWiredActionsToNode(mySample, myActions, kQTEventIdle); if (myErr != noErr) goto bail; myErr = QTDisposeAtomContainer(myActions); if (myErr != noErr) goto bail; // add frame-loaded actions // create an action container for frame-loaded actions myErr = AddVRAct_CreateFrameLoadedActionContainer (&myActions); if (myErr != noErr) goto bail; // add frame-loaded actions to sample myErr = AddVRAct_SetWiredActionsToNode(mySample, myActions, kQTEventFrameLoaded); if (myErr != noErr) goto bail; myErr = QTDisposeAtomContainer(myActions); if (myErr != noErr) goto bail; // add hot-spot actions // find the first hot spot in the selected node; don’t bail if there are no hot spots myErr = AddVRAct_GetFirstHotSpot(mySample, &myHotSpotID); if ((myErr == noErr) && (myHotSpotID != 0)) { // create an action container for hot-spot actions myErr = AddVRAct_CreateHotSpotActionContainer (&myActions); if (myErr != noErr) goto bail; // add hot-spot actions to sample myErr = AddVRAct_SetWiredActionsToHotSpot(mySample, myHotSpotID, myActions); if (myErr != noErr) goto bail; } // replace sample in media myTrackEditRate = GetTrackEditRate(myTrack, myTrackOffset); if (GetMoviesError() != noErr) goto bail; GetTrackNextInterestingTime(myTrack, nextTimeMediaSample | nextTimeEdgeOK, myTrackOffset, fixed1, NULL, &mySelectionDuration); if (GetMoviesError() != noErr) goto bail; myErr = DeleteTrackSegment(myTrack, myTrackOffset, mySelectionDuration); if (myErr != noErr) goto bail; myErr = BeginMediaEdits(myMedia); if (myErr != noErr) goto bail; myErr = AddMediaSample( myMedia, mySample, 0, GetHandleSize(mySample), mySampleDuration, (SampleDescriptionHandle)myQTVRDesc, 1, mySampleFlags, &myNewMediaTime); if (myErr != noErr) goto bail; myErr = EndMediaEdits(myMedia); if (myErr != noErr) goto bail; // add the media to the track myErr = InsertMediaIntoTrack(myTrack, myTrackOffset, myNewMediaTime, mySelectionDuration, myTrackEditRate); if (myErr != noErr) goto bail; // set the media property atom to enable wired action and idle-time processing myHasActions = true; myErr = AddVRAct_WriteMediaPropertyAtom(myMedia, kSpriteTrackPropertyHasActions, sizeof(Boolean), &myHasActions); if (myErr != noErr) goto bail; myFrequency = EndianU32_NtoB(1); myErr = AddVRAct_WriteMediaPropertyAtom(myMedia, kSpriteTrackPropertyQTIdleEventsFrequency, sizeof(UInt32), &myFrequency); if (myErr != noErr) goto bail; // update the movie resource myErr = UpdateMovieResource(myMovie, myResRefNum, myResID, NULL); if (myErr != noErr) goto bail; // close the movie file myErr = CloseMovieFile(myResRefNum); bail: if (myActions != NULL) QTDisposeAtomContainer(myActions); if (mySample != NULL) DisposeHandle(mySample); if (myQTVRDesc != NULL) DisposeHandle((Handle)myQTVRDesc); if (myMovie != NULL) DisposeMovie(myMovie); }
Conclusion
In this article, we’ve learned how to work with the QuickTime VR Manager to control the operation of QuickTime VR movies programmatically. We’ve seen how to adjust pan, tilt, and zoom angles, how to alter the displayed image by drawing into a panorama’s prescreen buffer, and how to intercept some QuickTime VR Manager functions. As usual, these few examples of using the VR APIs are just the tip of the iceberg; with just a little bit more time and energy, we can develop some even more impressive interactive applications using QuickTime VR.
We’ve also taken a look at QuickTime VR and wired actions, first reviewing how to send actions to VR movies and then (more importantly) learning how to embed wired actions into QuickTime VR movies. We haven’t yet learned how to actually create QuickTime VR movies from scratch, but we do have a preliminary idea of how they are put together (at least in part). Perhaps in a future article we’ll learn how to build QuickTime VR movies.
Credits and References
Thanks to Bryce Wolfson for reviewing an earlier version of this article and for providing some helpful comments. The code for adding wired actions to QuickTime VR movies is based on some code by Bill Wright. For complete information on the QuickTime VR Manager, see the book Virtual Reality Programming With QuickTime VR 2.1 by Apple Computer, Inc.
Tim Monroe is a member of the QuickTime engineering team. You can contact him at monroe@apple.com. The views expressed here are not necessarily shared by his employer.
![](/file/12652/www.mactech.com.tar/www.mactech.com/sites/all/themes/custom_front/img/search_text.gif)
- SPREAD THE WORD:
- Slashdot
- Digg
- Del.icio.us
- Newsvine