![](/file/12652/www.mactech.com.tar/www.mactech.com/sites/all/themes/custom_front/images/you_are_here_red.gif)
![](/file/12652/www.mactech.com.tar/www.mactech.com/sites/default/files/beta-site.gif)
|
Volume Number: | 10 | |||
Issue Number: | 12 | |||
Column Tag: | New Apple Technology | |||
Related Info: Help Manager | ||||
Writing Control Strip Modules
Extend the strip with your own items
By Mike Blackwell, mkb@cs.cmu.edu
Note: Source code files accompanying article are located on MacTech CD-ROM or source code disks.
About the Author
Mike Blackwell - Mike organizes international symposiums, travels around, and figures out how to program things before Apple gets around to documenting them. He’s also been known to do the occasional piece of contract work. Given that chose to go traveling without sending us a bio to fill this space, he’s in no position to dispute our claim that he spends most of his time working for a huge unnamed charitable foundation, handing out large grants to starving software entrepreneurs.
When Apple introduced the PowerBook 500 and Duo 280 series computers, they also released the latest version of System 7. Along with the usual new goodies that accompany a system release this included the Control Strip extension. The Control Strip is a long thin window which floats above all other applications on the desktop, always easily available to the user. When retracted, the Control Strip tucks out of the way in a corner of the desktop. When extended, it presents a row of separate chiclet tiles, each displaying some aspect of system status, such as remaining battery life or the state of file sharing. Some of the tiles allow the user to click on them to quickly change the state of the system through a popup menu or dialog box.
Each of the status tiles in the Control Strip is controlled by a chunk of code called a Control Strip Module (specifically, a resource of type ‘sdev’), which is generally bundled into a corresponding module file. The user can control which modules are available simply by adding or removing the module files from the Control Strip Modules folder in the system folder. At boot time, the Control Strip extension loads and initializes all of the modules found in this folder.
Control strip modules are fairly easy to write. Since the Control Strip extension itself deals with all of the low level interface to the system, the module programmer is freed from the usual minutiae of Macintosh programming such as toolbox initialization, event loops, grafports, and the likes. However, there are still some tricky areas: resource loading, global memory, loading and saving user preferences, and balloon help, for example. In this article we will use MPW to develop a simple module which displays a rudimentary clock, to learn just what makes a Control Strip module tick.
Before we get started, there are a few caveats to keep in mind:
• Space in the Control Strip is a very limited resource, and should not be needlessly cluttered with modules that might be better implemented as applications. The Control Strip should be reserved for information that the user may need convenient access to at any time.
• Since Control Strip modules are always “running,” they should minimize their impact on system performance by consuming as little memory and as few processor cycles as possible.
• Finally, the current release of the Control Strip extension only runs on the PowerBook machines.
If you would like to play with Control Strip on a desktop Mac, you have two options. If you have access to the Control Strip extension (on the System 7.5 installation disk, for example), Rob Mah has produced a nice little patcher program which will modify Control Strip to run on all platforms (by deleting ‘sdev’ resource number -4064 from the extension, which Control Strip uses as a “PowerBook-only” flag). Also, Sigurdur Asgeirsson has written a shareware Control Strip work-alike called Desktop Strip, which will run on all Macs and use most Control Strip modules (some nice ones are provided). These programs are available at finer archive sites everywhere, try:
/* 1 */ ftp://mac.archive.umich.edu/ mac/system.extensions/cdev/controlstrippatcher2.0.sit.hqx ftp://mac.archive.umich.edu/ mac/system.extensions/cdev/desktopstrip1.0.sit.hqx
They are also available on this issue’s code disk and online sites (see p. 2).
Structure of a Module
All code for the module is contained in a code resource of type ‘sdev’ in the module file. Typically a module file has only one ‘sdev’ resource corresponding to one module. If a module file has more than one ‘sdev’ resource, then each is loaded as a separate module, though this gives the user less flexibility in mixing and matching modules. One possible use for multiple modules in one file would be to have different versions of a similar module, only one of which will load depending on the user’s hardware configuration. As we will see shortly, during the initialization process a module can decide for itself if it should stay loaded.
Besides the ‘sdev’ resource, a module file will typically contain a couple of string and picture resources, plus the usual version, icon, and bundle resources to help the user distinguish the file from a generic document. Unless otherwise required, the programmer should number all resources in the range 256 - 32767 to avoid conflicts with other system resources.
In our example module, SimpleCSClock.r is a Rez file which contains all of the resources for the module except for the ‘sdev’ resource, which will be produced by the C compiler. It starts with a version and signature resource, with information to be displayed by the Finder’s Get Info command. The signature (‘cs!C’ in this case) is also used as the file’s creator ID and as a Preferences key, and should be unique. If you are planning to distribute a module widely, its signature should be registered with Apple to prevent conflicts with other applications.
Next is a ‘PICT’ resource which is a picture of a small right-pointing arrow. This will be drawn in the right-hand side of our tile, to indicate to the user that the module provides a popup menu. A ‘MENU’ resource defines that menu, followed by a couple of strings and string lists which will be described later. Finally, a ‘BNDL’, ‘FREF’, and icon family define the icons for the file that the user will see from the Finder.
The header file SimpleCSClock.h defines the various resource and item numbers in a common location for both the Rez and C programs.
Module Initialization and Global Memory
The Control Strip communicates to the module through a single entry point at the beginning of the module’s ‘sdev’ resource. The prototype for this interface is
/* 2 */ pascal long ControlStripModule(long message, long params, Rect *statusRect, GrafPtr statusPort);
message signifies which action the Control Strip wishes the module to perform, from which the module can then dispatch the appropriate routines. These actions include module initialization, display management, queries for module features or display size, periodic “tickles,” and a couple of others.
parms is generally used to store a handle to a parameter or global variables needed by the control strip. The statusRect and statusPort variables are used when drawing the control strip tile.
In addition to this message interface, the Control Strip extension also provides the module with a handful of utility toolbox routines which simplify many actions common to most modules (the utility routine names all begin with the letters “SB” - until just before its release, Control Strip was called Status Bar).
Control Strip sends sdevInitModule as the very first message a module receives. This happens as the control strip extension loads modules from the modules folder at boot time. sdevInitModule asks the module to determine if it can run on this particular platform (generally using various calls to Gestalt to query for necessary features), and then initialize its internal state. If the initialization returns a value less than zero to the Control Strip (because it cannot run on this platform or something failed during initialization), then the module is unloaded and not installed in the Control Strip.
In our example, the Initialize() routine is dispatched on receipt of the initialize message (note that params will always be 0 for this message). After checking the machine features, a chunk of memory and a handle to it is allocated to hold all of the global variables that the module will need to maintain its state. These variables are defined in the Globals structure at the beginning of the program. If the initialization proceeds successfully, then the handle to the globals is returned to the Control Strip. On all subsequent message calls to the module the Control Strip will pass this handle in params, so the globals will always be accessible.
The module file will not be open after the first initialize message has been processed, so any resources that the module needs must be loaded from the file during initialization. This is accomplished with toolbox variants of GetResource. Once each resource is loaded in to memory, its handle is stashed in the globals structure, and the resource is detached so it will always be available. One reason why the module file is not left open after initialization is to conserve power on PowerBooks. If the module were to make GetResource calls on a regular basis it would keep the hard disk turned on a lot.
Once the resources are loaded, the Initialize() routine loads and sets any previously saved user’s preferences. This is accomplished using two of the Control Strip’s utility routines. First, SBGetDetachedIndString() is called to get the string item corresponding to the name of our preferences from the recently detached ‘STR#’ resource helpStrings. This name is then passed to SBLoadPreferences() to read the module’s preferences in to the SavedSettings structure. The first field of the preferences structure is checked against 4-byte module signature to make sure these preferences really belong to this module. Finally, the user’s preferences are copied into the globals structure (in this case, there is only one preference: whether to display the time in 12- or 24-hour format).
Maintaining The Display
Once the module has been initialized and loaded, it can go about its business of maintaining its status display in its tile. This is primarily accomplished through two messages from the Control Strip: sdevPeriodicTickle and sdevDrawStatus. For these two messages (and all others as well), the Control Strip passes the handle to our globals structure in params, a pointer to the drawing rectangle in statusRect, and a pointer to the GrafPort in statusPort (which typically you won’t need to access directly).
Note that each time a message is processed after initialization, the first thing the message handler does is save the state of the globals structure handle, and then lock the structure down so it won’t move while the message is being handled. At the completion of the message, the handle’s state is restored. We don’t simply use HLock()/HUnlock(), because modules can be reentrant - it is possible for the Control Strip to call the module’s message handler before a previous message has completed. If this happens and we inadvertently unlock the handle underneath another message’s feet, all hell could break loose. For this same reason, it’s best not to store variables like parameter blocks in the globals structure, since two messages could be trying to modify them at the same time. Allocate these variables on the stack as needed (by declaring them within the scope of the handler routine), or if they must be global, add an in-use flag.
The module performs most of its work in the sdevPeriodicTickle message. This message is called periodically, but there is no guarantee about how often or when it will be called. The sdevPeriodicTickle message gives the module a chance to check whether its status display is out of date, and if so to update it. Since our clock module updates rather slowly (once every minute), there’s no need to check if the time has changed every single time the tickle message is called - once every couple of seconds is adequate and saves wasting cycles needlessly. To accomplish this, we use the nextTick global variable to signal when we need to check if the display is out of date. If the system clock (returned by TickCount()) is less than nextTick, then we return from the message right away without any further processing.
Otherwise, we call UpdateTime(), which checks to see if the time has changed since it was last displayed, and stores the time to be displayed in the globals structure. If the time has changed, the tile rectangle is erased and DrawDisplay() is called to update the display. DrawDisplay(), in turn, converts the current time in to a string, selects the proper font, sets the drawing point within the statusRect, and calls DrawString() to draw the time of day in the module’s tile. DrawDisplay() then draws the small right-pointing arrow picture just to the right of the time string, which indicates that a popup menu is available. Finally, nextTick is set for two seconds from the current time.
After drawing all of the information in the statusRect, the tickle message handler compares the width of what it has just drawn (returned by DrawDisplay()) to the width of what it had drawn the previous time through (and saved in the width field of the globals structure). If the width has changed then the width field is updated, and sdevResizeDisplay bit is set to be returned to the message call. This bit signals to the Control Strip to shrink or grow the module’s tile appropriately so all of the data is visible in the tile.
When the Control Strip is informed that the module’s tile width has changed, it will next send the module an sdevGetDisplayWidth message request. Since the module is maintaining that width anyway, there’s no need to recompute it, and the module simply returns the width field from the globals structure.
The other message which maintains the module’s displays is sdevDrawStatus. This message is sent by the Control Strip when the display needs to be redrawn, such as for a window update or display hilite, and requests the module to draw its display in its tile. In our case, we do this by calling the DrawTime() routine. Since the module will always be displaying the same information it has already displayed, the width will not have changed and the return from DrawDisplay() can be ignored.
User Interaction
Not all modules require input from the user - they may simply display status information - but our clock module allows the user to select the format of the time presentation. The user can select either a 12- or 24-hour display format by clicking on the module’s tile and making a menu selection from the popup menu that appears. The currently selected option is flagged with a bullet (Figure 1).
Figure 1
The module informed the Control Strip that it wanted to process mouse clicks in its tile by setting the sdevWantMouseClicks and sdevDontAutoTrack bits in its reply to an sdevFeatures message. Whenever the Control Strip detects a click in the module’s tile, it does two things: first, it highlights the tile by darkening its background and shifting the display slightly for a 3-D effect, and then it sends the module an sdevMouseClick message. If the sdevDontAutoTrack feature bit had not been set, then the module would not receive the sdevMouseClick message until after the mouse was clicked and then released in the tile, causing the tile to act as a button instead of a menu title.
Our module responds to the sdevMouseClick message by calling its HandleMouseClick() routine. This routine first checks the current display mode, and marks the appropriate selection in the menu with a bullet character (conveniently pre-defined as sdevMenuItemMark). It then displays the popup menu by calling the Control Strip utility routine SBTrackPopupMenu(). Once a menu item has been selected, the appropriate display mode is flagged in the global structure. If the display mode was changed, then the reply to the sdevMouseClick message has the appropriate bits set to inform the Control Strip that the new user preference needs to be saved and that the balloon help message has changed. DrawDisplay() is called with a flag to inhibit actual drawing to compute the width of the new display. Similar to the tickle message, if the width has changed then the global width is updated and the sdevResizeDisplay reply bit is set to inform Control Strip.
User Preferences
The Control Strip provides the module with a very nice mechanism to save its state between shutdown and restart. This state is stored as a ‘pref’ resource in the Control Strip Preferences file in the system Preferences folder.
At some convenient point after a module has requested to save its settings (by setting the sdevNeedToSave bit in the reply to an sdevMouseClick message, for example) it will receive an sdevSaveSettings message. Control Strip typically waits until some other process has powered up the hard disk, or during shutdown time, to send this message. When our module receives this message, it dispatches its SavePreferences() routine. This allocates memory for the SavedSettings structure, which for our module has only two fields: an identifying signature, and the boolean display mode we want to save. The signature is just a safety feature to make sure the module doesn’t get confused later by inadvertently trying to load some other module’s incorrectly stored resource, and we’ll set it to our file creator type. The display mode is just copied from the current mode in the global structure.
Once the settings structure is set up and filled in, the module needs to pick a name for the resource. For convenience, we already predefined this name as an item in the help strings ‘STR#’ resource, so the module calls SBGetDetachedIndString() to retrieve the name. Then the module calls SBSavePreferences() to save the settings structure as a ‘pref’ resource in the preferences file.
On startup these steps are basically performed in reverse to load and set the previously saved settings, as described in the Module Initialization section.
Balloon Help
The Control Strip allows each module to provide simple balloon help to the user. If balloon help is turned on and the module has set the sdevHasCustomHelp feature bit, then the Control Strip will send the module an sdevShowBalloonHelp message when the mouse is sitting in the module’s tile. The module can then call SBShowHelpString() with a descriptive string to be displayed to the user (Figure 2). There is no easy way to provide more detailed help for things like menu items.
Figure 2
If the module changes its mode while handling a tickle or mouse click message, it can set the sdevHelpStateChanged bit in its reply, telling the Control Strip to issue a new sdevShowBalloonHelp message to cause the help string to change.
To give the user more information about the module file, our module has a Finder help string resource (a ‘STR ’ with an ID of -16397). If the user double clicks on the module’s icon from the Finder, the Finder will display a dialog box containing this string, telling the user what the module is and how to use it. We’ve also set a Help Manager resource pointing to this same string. The idea is that balloon help from the Finder will display the string, but this does not currently work because the Finder doesn’t know about ‘sdev’ files so it always displays a generic message. But it only costs a few bytes, and maybe one day the Finder will do the right thing.
Additional Resources
Hopefully, this article has given you enough information to go out and write your own Control Strip modules. The full documentation for the Control Strip API can be found, oddly enough, in Chapter 5 of Apple’s PowerBook 520/520c/540/540c Developer Notes. You can find a copy on any recent Develop Bookmark CD (a very worthwhile addition to your programming library to complement your MacTech magazines). It will also soon be released as a tech note.
The Control Strip header file ControlStrip.h can be found on Apple’s ETO CD #15 and later. If you don’t have access to the “official” version, Rob Mah provides a home grown version along with his patcher. Note that there is a slight inconsistency between Apple’s and Mah’s definitions of the return bits for tickle and feature messages. Apple defines the bit number (for example, sdevHasCustomHelp = 2) while Mah defines the bit position (sdevHasCustomHelp = (1 << 2)). The code in this article uses Apple’s conventions.
Many thanks to Steve Christensen at Apple, Control Strip’s author, for reviewing this article.
SimpleCSClock.h
/* 3 */ #define kSignature 'cs!C' #define kArrowPictID 256 #define kConfigMenuID256 #define k12HourCmd 1 #define k24HourCmd 2 #define kHelpStringsID 256 #define kPrefNameStr 1 #define kHelp12StringStr 2 #define kHelp24StringStr 3
SimpleCSClock.c
/* 4 */ /* SimpleCSClock - A simple control strip clock module By Mike Blackwell, mkb@cs.cmu.edu */ #include <GestaltEqu.h> #include <Fonts.h> #include <Memory.h> #include <Packages.h> #include <Resources.h> #include <Strings.h> #include <SysEqu.h> #include <ToolUtils.h> #include "ControlStrip.h" #include "SimpleCSClock.h" // How often to check if the display needs to be updated (in ticks) #define INTERVAL (2 * 60) // 2 seconds // Display font information #define DISPLAY_FONT monaco #define DISPLAY_FONT_SIZE 9 #define DISPLAY_FONT_FACE 0 #define DISPLAY_MARGIN 3 // Blank space to left and right of text typedef struct Globals { PicHandlearrowPicture; // Picture to show we have a popup menu short arrowWidth, arrowHeight; // Size of arrow short fontHeight;// Ascender height of display font Handle helpStrings; // Balloon help strings for each state MenuHandle configMenu; // Menu to select display options int width; // Width of display Booleanshow12Hour;// True for 12 hour display int displayTime; // Time that is currently being displayed // (in minutes since midnight) unsigned long nextTick; // When to next update the display } Globals, *GlobalPtr, **GlobalHandle; typedef struct SavedSettings { OSType signature; // Signature to verify that prefs are for // this module Booleanshow12Hour;// True for 12 hour display } SavedSettings; /* Prototypes 9/ long Initialize(void); void CleanUp(GlobalHandle globHand); long HandleMouseClick(GlobalPtr globPtr, Rect *statusRect); short SavePreferences(GlobalPtr globPtr); Boolean UpdateTime(GlobalPtr globPtr); intDrawDisplay(GlobalPtr globPtr, Rect *statusRect, Boolean drawit); Boolean CheckFeatures(void); pascal long main(long message, long params, Rect *statusRect, GrafPtr statusPort) { #pragma unused(statusPort) char savedState; GlobalPtrglobPtr; long result; int current_width; Str255 helpString; if (params > 0) { // If we have globals allocated, savedState = HGetState((Handle)params); // save the handle state, HLock((Handle)params); // lock the handle to the globals, globPtr = *(GlobalHandle)params; // and point to globals directly } result = 0;// Return zero for unknown messages switch (message) { case sdevInitModule:// Initialize the module result = Initialize(); break; case sdevCloseModule: // Clean up before being closed CleanUp((GlobalHandle)params); params = 0L; // Handle is gone now break; case sdevFeatures:// Return feature bits result = (1 << sdevWantMouseClicks) | \ (1 << sdevDontAutoTrack)| \ (1 << sdevHasCustomHelp); break; case sdevGetDisplayWidth:// Return display width result = globPtr->width; break; case sdevPeriodicTickle: // Periodic tickle when nothing // else is happening // Time to update display yet? if (TickCount() >= globPtr->nextTick) { if (UpdateTime(globPtr)) { // Check if time has changed EraseRect(statusRect); // Yep, erase the old current_width = DrawDisplay( globPtr, statusRect, true);// And draw the new // If the display width changed, let the control strip know if (globPtr->width != current_width) { globPtr->width = current_width; result = (1 << sdevResizeDisplay); } } globPtr->nextTick = TickCount() + INTERVAL; } break; case sdevDrawStatus:// Update the display (void)DrawDisplay(globPtr, statusRect, true); break; case sdevMouseClick:// User clicked on the module's // display area in the status bar result = HandleMouseClick(globPtr, statusRect); break; case sdevSaveSettings: // Save changed settings result = SavePreferences(globPtr); break; case sdevShowBalloonHelp:// Display custom balloon help SBGetDetachedIndString(&helpString, globPtr->helpStrings, globPtr->show12Hour ? kHelp12StringStr : kHelp24StringStr); SBShowHelpString(statusRect, &helpString); break; } if ((long)params > 0) // If we have globals allocated, HSetState((Handle)params, savedState);// restore the locked/unlocked state return(result); } Initialize long Initialize(void) { long result; GlobalPtrglobPtr; GlobalHandle globHand; FontInfo fontInfo; Str255 prefsResourceName; SavedSettings **preferences; result = -1; // Assume failure if (!CheckFeatures()) return(result); if (! (globHand = (GlobalHandle)NewHandleClear(sizeof(Globals)))) goto done; // Allocate the globals HLock((Handle)globHand); // Lock the globals while using them globPtr = *globHand;// and get a pointer to them // Load and detach the ‘up arrow’ picture if (! (globPtr->arrowPicture = GetPicture(kArrowPictID))) goto done; DetachResource((Handle)globPtr->arrowPicture); // Compute size of arrow picture globPtr->arrowHeight = (**globPtr->arrowPicture).picFrame.bottom - (**globPtr->arrowPicture).picFrame.top; globPtr->arrowWidth = (**globPtr->arrowPicture).picFrame.right - (**globPtr->arrowPicture).picFrame.left; // Compute size of display font TextFont(DISPLAY_FONT); TextSize(DISPLAY_FONT_SIZE); TextFace(DISPLAY_FONT_FACE); GetFontInfo(&fontInfo); globPtr->fontHeight = fontInfo.ascent; // Load and detach the configuration menu if (! (globPtr->configMenu = GetMenu(kConfigMenuID))) goto done; DetachResource((Handle)globPtr->configMenu); // Load and detach the help strings if (! (globPtr->helpStrings = Get1Resource('STR#', kHelpStringsID))) goto done; DetachResource(globPtr->helpStrings); // Get the module's saved preferences, if any, and configure the module SBGetDetachedIndString(&prefsResourceName, globPtr->helpStrings, kPrefNameStr); if (! SBLoadPreferences(&prefsResourceName, (Handle *)&preferences) && ((**preferences).signature == kSignature)) { globPtr->show12Hour = (**preferences).show12Hour; } globPtr->nextTick = 0; // Do first update right away globPtr->width = 0; globPtr->displayTime = 0;// Haven't displayed a time yet HUnlock((Handle)globHand); // Unlock the globals result = (long)globHand; // Return the handle to the // globals as the result done: return(result); // Return either a handle or // an error code } CleanUp void CleanUp(GlobalHandle globHand) { GlobalPtrglobPtr; if ((long)globHand <= 0) return; HLock((Handle)globHand); globPtr = *globHand; if (globPtr->arrowPicture) DisposeHandle((Handle)globPtr->arrowPicture); if (globPtr->configMenu) DisposeMenu(globPtr->configMenu); if (globPtr->helpStrings) DisposeHandle(globPtr->helpStrings); DisposeHandle((Handle)globHand); } HandleMouseClick long HandleMouseClick(GlobalPtr globPtr, Rect *statusRect) { short menuItem; long result; int new_width; Booleanmode_changed; // Check off the appropriate items in the popup menu if (globPtr->show12Hour) { SetItemMark(globPtr->configMenu, k12HourCmd, sdevMenuItemMark); SetItemMark(globPtr->configMenu, k24HourCmd, noMark); } else { SetItemMark(globPtr->configMenu, k24HourCmd, sdevMenuItemMark); SetItemMark(globPtr->configMenu, k12HourCmd, noMark); } result = 0; // Display the popup menu menuItem = SBTrackPopupMenu(statusRect, globPtr->configMenu); // Handle the menu selection mode_changed = false; switch (menuItem) { case k12HourCmd: if (!globPtr->show12Hour) { globPtr->show12Hour = true; mode_changed = true; } break; case k24HourCmd: if (globPtr->show12Hour) { globPtr->show12Hour = false; mode_changed = true; } break; } // If the mode changed, calculate new display width // and let CS know what happened if (mode_changed) { result = (1 << sdevNeedToSave) | (1 << sdevHelpStateChange); new_width = DrawDisplay(globPtr, statusRect, false); if (globPtr->width != new_width) { globPtr->width = new_width; result |= (1 << sdevResizeDisplay); } } return(result); } SavePreferences short SavePreferences(GlobalPtr globPtr) { short result; SavedSettings **preferences; Str255 prefsResourceName; preferences = (SavedSettings**)NewHandle( sizeof(SavedSettings)); if (! (result = MemError())) { // Allocate a block to hold the settings // Include a signature to verify it’s ours (**preferences).signature = kSignature; (**preferences).show12Hour = globPtr->show12Hour; // Get the name of the preferences resource SBGetDetachedIndString(prefsResourceName, globPtr->helpStrings, kPrefNameStr); // Save the settings in the Control Strip's preferences file result = SBSavePreferences(prefsResourceName, (Handle)preferences); DisposeHandle((Handle)preferences); // Get rid of the block } return(result); } UpdateTime // Compute the current time in seconds since midnight. If it's changed since we // last displayed the time, return true. Boolean UpdateTime(GlobalPtr globPtr) { unsigned long now; int dispTime; GetDateTime(&now);// Get seconds since epoch // Compute minutes since midnight dispTime = (now % (60 * 60 * 24)) / 60; // Has the time changed yet? if (dispTime != globPtr->displayTime) { globPtr->displayTime = dispTime; // Yes return(true); // Need to update display } else { return(false); } } NumStr // Stuff the ascii string representing the number in to the destination string. // Number range is 0 - 99. If pad is true, pad with a zero if necessary. // Return pointer to end of string. char *NumStr(char *dest, int num, Boolean pad) { if (num < 0) num = 0; if (num > 99) num = 99; if (num >= 10) { *dest++ = (num / 10) + '0'; num %= 10; } else if (pad) { *dest++ = '0'; } *dest++ = num + '0'; *dest = '\0'; return(dest); } DrawDisplay // Draw the time specified in displayTime. If drawit is false, don't actually // do any drawing. Returns the width of the display int DrawDisplay( GlobalPtr globPtr, Rect *statusRect, Boolean drawit) { int result; char buf[10], *bptr; int hours, minutes; Booleanafternoon; int width, offset; Rect arrowRect; result = 0; hours = globPtr->displayTime / 60; if (globPtr->show12Hour) { afternoon = (hours >= 12); if (afternoon) hours -= 12; if (hours == 0) hours = 12; } minutes = globPtr->displayTime % 60; bptr = buf; if (globPtr->show12Hour) { bptr = NumStr(bptr, hours, false); *bptr++ = ':'; bptr = NumStr(bptr, minutes, true); *bptr++ = (afternoon) ? 'P' : 'A'; *bptr++ = 'M'; *bptr = '\0'; } else { bptr = NumStr(bptr, hours, true); *bptr++ = ':'; bptr = NumStr(bptr, minutes, true); *bptr = '\0'; } c2pstr(buf); // Draw the time string a little away from the right edge and centered vertically // Compute top/bottom margin. -1 is tweak to make it look just right... TextFont(DISPLAY_FONT); TextSize(DISPLAY_FONT_SIZE); TextFace(DISPLAY_FONT_FACE); if (drawit) { offset = (statusRect->bottom - statusRect->top - globPtr->fontHeight) / 2 - 1; MoveTo(statusRect->left + DISPLAY_MARGIN, statusRect->top + offset + globPtr->fontHeight); DrawString(buf); } width = DISPLAY_MARGIN + StringWidth(buf) - 1; // Draw the right arrow to show that the module has a popup menu if (drawit) { arrowRect.left = statusRect->left + width; arrowRect.right = arrowRect.left + globPtr->arrowWidth; arrowRect.top = statusRect->top + (statusRect->bottom - statusRect->top - globPtr->arrowHeight) / 2; arrowRect.bottom = arrowRect.top + globPtr->arrowHeight; DrawPicture(globPtr->arrowPicture, &arrowRect); } width += globPtr->arrowWidth; return(width); } CheckFeatures // Check if this machine is capable of running this control strip (probably // by using Gestalt). This simple example will run on any Mac, so just return // true. Boolean CheckFeatures(void) { return(true); }
![](/file/12652/www.mactech.com.tar/www.mactech.com/sites/all/themes/custom_front/img/search_text.gif)
- SPREAD THE WORD:
- Slashdot
- Digg
- Del.icio.us
- Newsvine