![](/file/12652/www.mactech.com.tar/www.mactech.com/sites/all/themes/custom_front/images/you_are_here_red.gif)
![](/file/12652/www.mactech.com.tar/www.mactech.com/sites/default/files/beta-site.gif)
|
Volume Number: | 10 | ||
Issue Number: | 1 | ||
Column Tag: | Pascal/C workshop |
The Pascal Programmer’s Guide
To Understanding ‘C’
Teach yourself to read another language - Part II
By Ken Gladstone, MacTech Magazine Technical Editor
Note: Source code files accompanying article are located on MacTech CD-ROM or source code disks.
This article is the second half of my Pascal Programmer’s Guide to Understanding “C”. If you haven’t already, I suggest you read the first half, which appeared in our December 1993 issue - otherwise you will probably be thoroughly confused by this half! That first half covered the following “C” concepts: comments, identifiers, operators, constants, program structure, and variable declarations and scope. So, let’s continue
PARAMETER PASSING
One key difference between C and Pascal is that C always passes parameters by value, never by reference. Therefore, you may be wondering how a C function can ever modify a passed in parameter. It can’t - but you can accomplish the same thing by passing a pointer to the value you wish to modify, and having the function modify the pointed to value. Here is an example:
/* 1 */ /************************ C Version *************************/ void doubleIt( int * pointerToIntParam ) { (*pointerToIntParam) *= 2; } int main() { int myInt = 3; doubleIt( & myInt ); return myInt; } /******************** End of C Version **********************/ (********************* Pascal Version ***********************) program myProgram; var myInt: INTEGER; procedure doubleIt( var IntParam: INTEGER ); BEGIN IntParam := IntParam * 2 END; BEGIN myInt := 3; doubleIt( myInt ) END. (****************** End of Pascal Version *******************)
OLD VERSUS NEW FUNCTION DECLARATIONS
So far, I’ve been showing functions as follows:
int MyFunc( int a, char b, float c ) { /* Code goes here */ }
This way of writing functions is an ANSI extension that allows C to perform parameter type checking when calling a function. Things weren’t always so nice. In the original K&R C, functions were written as follows:
int MyFunc( a, b, c ) int a; char b; float c; { /* Code goes here */ }
In original C compilers, when calling a function, there was no checking of parameter types, or often even of the number of parameters! In old C, you could write a call to a function before it had ever been defined, declared or mentioned in any way! Now, C compilers have much stronger type-checking. For example, Think C has a compiler option to require you to write a function prototype for every function.
FLOW CONTROL
So far, all of the examples that I’ve shown execute code sequentially - in fact, I’ve only shown declarations, assignment statements, function calls, and function return statements. Like Pascal, C has various loops and other constructs to control the flow of code. We’ll start with the while loop. The while loop in C is nearly identical to the one in Pascal, except that it needs parens around the test expression and it doesn’t have a DO keyword. Examples:
/* 2 */ while ( i < j ) i *= 2; // First C example while i < j DO i := i * 2; {Pascal Equiv.} while ( i < j ) // C example w/compound statement { sysBeep( 1 ); i *= 2; } while i < j DO {Pascal Equiv.} BEGIN sysBeep( 1 ); i := i * 2 END
Next we have the C do statement. This is a loop with the test at the end of each iteration, like the Pascal REPEAT statement, but the sense of the while test at the end is the opposite of the Pascal UNTIL test. Unlike the Pascal version, the C version needs braces if the loop contains a compound statement. And again, the while condition needs parens. Example:
/* 3 */ do // C version { sysBeep( x ); ++ x; } while ( x != 10 ); REPEAT {Pascal equiv.} sysBeep( x ); x := x + 1 UNTIL x = 10; Next we have the for loop. The for loop in C is far more general than the one in Pascal. It looks like this: for ( expr1; expr2; expr3 ) statement;
What it does is this: expr1 is an initialization that is performed before executing the loop for the first time. expr2 is a test that is performed before each iteration. As long as expr2 evaluates to non-zero, the looping continues. expr3 is a statement that is performed at the end of every iteration. C does not limit loops to simple count up and count down types. Any or all of the three expressions may be omitted, but the semicolons must remain. Any C for loop can be rewritten as follows:
/* 4 */ expr1; while( expr2 ) { statement; expr3; } Example: for ( i = 10; i != 0; --i ) // C example DoIt( i ); for ( i = 10; i; --i ) // An equivalent variation DoIt( i ); i = 10; // Another equivalent variation while ( i ) { DoIt( i );// Could use pre or post decrement -- i; } i = 10; // Yet another equivalent variation while ( i ) DoIt( i-- ); // Must use post decrement FOR i := 10 DOWNTO 0 DO {Pascal equivalent} DoIt( i );
The C if statement is very similar to the Pascal version: The else clause is optional, and the statements can be either simple or compound. The only difference is that C needs parens around the expression, it doesn’t use the THEN keyword, and as always, every statement needs a semicolon. Example:
/* 5 */ if ( condition ) // C DoOneThing(); else { DoAnother(); AndAnother(); }
IF condition THEN {Pascal version}
/* 6 */ DoOneThing ELSE BEGIN DoAnother; AndAnother END
C has a case statement that is very similar to the Pascal version. An example should suffice:
/* 7 */ switch ( x )// C version { case 1: case 2: DoTheOneOrTwoThing(); break; // Must explicitly leave each case case 3: DoTheThreeThing(); AndTheOtherThreeThing();// Purposely fall through case 7: DoTheThreeAndSevenThing(); break; default: DoTheDefaultThing(); }
CASE x OF { Pascal Version }
/* 8 */ 1, 2: DoTheOneOrTwoThing; 3: BEGIN DoTheThreeThing; AndTheOtherThreeThing; DoTheThreeAndSevenThing; { In Pascal, we need this twice } END; 7: DoTheThreeAndSevenThing; {In Pascal, we need this twice} OTHERWISE DoTheDefaultThing END
The previous example used the C break keyword. This keyword is like the Pascal Leave statement, and can be used to break out of the innermost while, do, for, or switch. C also has a continue keyword that like the Pascal Cycle statement. It skips to the next iteration of the innermost while, do or for loop.
Finally, C also has the dreaded goto statement (nothing seems to split programmers into warring factions as well as a goto statement does). Unlike in Pascal, you don’t declare labels in C, you just stick ‘em in the code, and they follow the same syntax as other identifiers. Example:
/* 9 */ {// C MyLabel: x := Function(); if ( x == 10 ) goto MyLabel; } LABEL 333; { Pascal } BEGIN 333: x = Function; IF x=10 THEN GOTO 333 END
LIBRARY FUNCTIONS
Standard C has oodles of library functions, such as malloc() and fread(), that you would use if you were programming on any computer unless you are programming on a Macintosh which you are. So for the most part, you will use calls like NewPtr() and FSRead() instead. You’ll need to look at your C compiler manual if you are interested in the standard C libraries.
STRINGS
Amazingly enough, standard C doesn’t really provide much built-in language support for strings. There are several standard C library functions that process strings, but no real string type or operators. C handles strings as simple arrays of the char type. In general, you would create a string in one of the following ways:
{ char myString[100]; // 100 bytes of storage char Another[] = "LetTheCompilerCountTheSize"; char * ptrToString; ptrToString = NewPtr( 100 ); }
C also has a different way of representing strings than the Pascal way. Instead of having a length byte followed by a number of characters, C starts immediately with characters, and the string is considered to continue until the occurrence of a zero byte. So this declaration:
char myString[] = "Foo";
creates four bytes of storage. It fills the first three with the word "Foo" and puts a zero byte in the fourth. This convention allows strings of arbitrary length.
This string representation doesn’t fit well with Pascal nor with the Mac toolbox, but don’t despair. C only uses this convention in two places: In string constants (like the "Foo" shown above) and in its library functions. The Mac solves the second problem by shunning the C library that is used by the rest of the world, in favor of its own toolbox. And the compilers on the Mac solve the first problem by introducing an ingenious extension, the \p escape sequence. Here is an example:
char pascalString[] = "\pFoo";
This causes the compiler to insert a Pascal-style length byte at the beginning of the string. It still generates a zero-byte at the end, however. So the above declaration would use five bytes: The first byte contains a 3 (for the Pascal length), the next three bytes contain the string, and the final byte contains the C-style zero byte. So pascalString can be used as a Pascal string, and (pascalString+1) or &pascalString[1] can be used as a C string.
THE PREPROCESSOR
C compilers include a preprocessor step that reads in the source file, expands macros, and then writes back a temporary file that is fed into the actual compiler. Keep in mind that preprocessor commands are purely compile-time, not run-time operations. They are similar to Pascal {$ } compiler directives. Instead of being embedded within comments, C preprocessor instructions begin with a number sign ‘#’. Here is a (somewhat contrived) code fragment that includes many of the common preprocessor instructions:
/* 10 */ #include <stdio.h> #include "myheader.h" #define DEBUG // Delete this line before shipping program. #define PI3.14159 #define square(a)( ( a ) * ( a ) ) #define cube(a) ( ( a ) * square( a ) ) #define max(a,b) ( ( ( a ) > ( b ) ) ? ( a ) : ( b ) ) #pragma segment mySegment double MaxSurfaceOrVolume( double radius ) /* * This is a strange function which will return either the * surface area or the volume of a sphere, whichever is * larger, for a given radius. */ { #ifdef DEBUG printf( "Hey, we're in the MaxSurfaceOrVolume function" ); #else printf( "Hey, we're running the non-debug version" ); #endif #if 0
I could have a bunch of lines of code in here, and they
wouldn't ever be executed, or even compiled.
/* 11 */ #endif return max( 4 * PI * square( radius ), 4.0/3.0 * PI * cube( radius ) ); }
The following table describes the preceding preprocessor statements:
Preprocessor Statement Meaning
#include <stdio.h> Similar to the Pascal {$I filename} directive. Paste the contents of the included file into here as if they had actually been typed into this file. The angle brackets generally tell the compiler to look for the include file in its list of “system” file folders. Include files are generally named with a .h at the end. They generally consist of things like typedefs, global variable definitions, function prototypes, preprocessor macros, etc. The Mac compilers provide header files that prototype all the toolbox functions so you don’t have to.
#include "myHeader.h" Same as above, but look in the list of “user” file folders instead of system file folders.
#define DEBUG Similar to the Pascal {$SETC DEBUG = 1} directive. Define the existence of a preprocessor variable. The existence of the variable can be checked later.
#define PI 3.14159 A simple text substitution. Replace all future occurences of PI with 3.14159.
#define square(a) ((a)*(a)) A substitution that takes parameters. Keep in mind that while a macro like this may look like a function call, it is purely text substitution, and therefore incurs none of the overhead of a function call.
#pragma segment mySegment The #pragma feature allows compiler specific instructions that are not actually part of the C language. Each compiler has its own pragmas. They are used for such things as turning optimizations on and off, disabling compiler warnings, or in this case, telling the compiler in what code segment to put this code. They perform many of the same functions as the miscellaneous Pascal {* } directives.
#ifdef DEBUG Similar to {$IFC } in Pascal. The subsequent statements will only be compiled if the variable is defined.
#else Similar to {$ELSEC}. The subsequent statements will only be compiled in the “else” case of the preceding #if.
#endif Similar to {$ENDC}. Ends a preprocessor #if or #ifdef construction.
#if 0 This is a quick way to disable a chunk of code. Change it to #if 1 to re-enable.
SUMMARY
You should now know enough C to be able to read C code listings. If you would like to get some more practice at seeing the differences between C and Pascal, you may wish to check out Dave Mark’s first few “Getting Started” articles. Dave wrote both a C and Pascal version for all of his programs in the 1992 columns. And while we didn’t print all of the listings in the magazine, we did include them in the source code disks and in our CD-ROM. Beyond that, you’ll probably have to break down a buy a couple of C books.
Million dollar (no, we won’t pay you, even if you have a good answer!) bonus question: K&R say that the term define is used when actually creating storage for a variable, and that the term declare is used when describing the characteristics of a variable (and only possibly creating storage). So why is it that type declarations, which allocate no storage, are spelled typedef (short for type definition) instead of being spelled typedecl? Perhaps this has been discussed somewhere before, but not that I’ve seen. Personally, I like the C keyword, and think that K&R have the define and declare terms backwards throughout their book!
![](/file/12652/www.mactech.com.tar/www.mactech.com/sites/all/themes/custom_front/img/search_text.gif)
- SPREAD THE WORD:
- Slashdot
- Digg
- Del.icio.us
- Newsvine