|
!see also "Diamond WDEF Correction" | ||
Volume Number: | 7 | |
Issue Number: | 10 | |
Column Tag: | C Workshop |
Related Info: Window Manager
Diamond WDEF
By Marisano James, Lancaster, PA
Note: Source code files accompanying article are located on MacTech CD-ROM or source code disks. See also Diamond WDEF Correction for code correction.
[Marisano James is a senior at Franklin and Marshall College where he works under the supervision of Dr. Jay Anderson, head of the Computer Science program, without whose early encouragement and support this article would not have been possible.]
Introduction
Over the years since MacTutor’s introduction, several window definition routines have been discussed by its authors. To my knowledge, none of these WDEFs have focused on non-rectangular windows. I believe this is because non-rectangular windows are often created for amusement instead of serious application. If this observation is correct, it identifies an interesting objection since MacTutor is read by many hobbyists. However, another justification for the aforementioned scarcity may be that non-rectangular windows do not operate as quickly as rectangular ones. This is because they must manipulate regions as opposed to rectangles. In this article I will address these issues and propose solutions. I think that this document and the code it discusses contain an element of discovery - discovery of new methods of approaching problems that allow us to see how we sometimes create our own restrictions. I believe this to be the best justification for this excursion.
Following is a discussion of the most significant difficulties I encountered while composing a WDEF for the manipulation of diamond shaped windows. Whenever a new technique is introduced I have explained why such a modification is useful. These explanations are designed to allow one to deduce the utility of my solutions, including in what other situations they might be useful.
Before proceeding I will describe the main characteristics of diamond windows. Diamond windows are shaped like rectangular windows tilted 45°. Because of this rotation their titles are drawn on a 45° slant. They expand and shrink from around their centers and may or may not contain any of the following: a go-away region, a grow region, and a zoom region.
Auxiliary Data
Non-rectangular windows will almost certainly use auxiliary data, and since this information is likely to be window specific, it should not be stored in the WDEF itself. This is where the predefined message wNew can be used to advantage.1 Within the routine designed to respond to this message, you can allocate memory for a window’s data. It is important that you also create a structure for your auxiliary data and include it wherever your non-rectangular windows are used. This way your code will compile and your debugger will interpret your structure’s members correctly. Below is a listing of the structure used in the diamond window WDEF.
/* 1 */ typedef struct { Rect myRect, stdRect; Booleanresizable, zoomedOut; PolyHandle goAwayPoly, growPoly, zoomPoly; RgnHandletitleRgn, goAwayRgn, growRgn, zoomRgn; short midX, midY, halfTitleSpace, leftStop, numChars; } DataRecord, DataRecordHdl;
Illustration 1: a Diamond Window
static variables
The A5 register normally points to an application’s global variables. However, WDEFs are not applications and so the register is unavailable for use in them. This means the QuickDraw globals are not directly accessible to WDEFs. The A4 register can be used to reference the QuickDraw globals, or it can point to the WDEF’s own global variables. Diamond windows make use of the second approach. This methodology coupled with the use of static variables, allows the QuickDraw patterns to be redefined with the same names and used in precisely the same manner as within applications. This is possible because static variables allow ‘local’ globals to have the same names, but different data, as true globals. If a file redefines globals using static variables, then the variable with the larger scope is unavailable in that file.
main()
The first thing the diamond window WDEF does is set up the A4 register so that the WDEF can use global variables Thereafter main() determines whether or not the WDEF was called to create a new window. If so, the actions taken by it are discussed in the section dedicated to the wNew message. If not, the affected window’s dataHandle is transferred to the global variable dataRecordHdl. Then this handle’s data is transferred into another global called dataRecord. This prevents the WDEF from having to double dereference the data’s handle every time it needs to alter a window’s auxiliary information. At the completion of the dispatching routine, the current data is BlockMoved() into the memory location held by the previous information.
wNew
When the diamond window WDEF encounters wNew messages it does not transfer data from the window’s dataHandle. That procedure would be time consuming and possibly dangerous since the uninitialized handle could be referencing sensitive memory locations. Instead, control is passed to InitNewWindow(). This function sets many of the window’s characteristics, such as the shape of its goAway box -- if it has one. Later, when a diamond window is resized, or its position is changed, the WDEF simply offsets the regions created by InitNewWindow() instead of actually recalculating them since their shapes and sizes do not change. However, this is not true of the content, structure, or title regions, which have no such guarantees about their sizes and therefore must be recalculated. Finally, InitNewWindow() provides a valid handle to memory where the auxiliary information can be stored after the WDEF has been exited. Because of this, the BlockMove() executed at the end of the WDEF performs a useful service by storing the window’s auxiliary data in memory referenced by this handle.
wGrowMsg
Diamond windows grow and shrink around their centers. This means that whenever the grow icon is dragged, all four corners move that same distance away from or toward the center of the window. This behavior ensures that diamond windows retain their shape. It also creates an interesting problem. When a window is being resized, the Window Manager repeatedly calls the WDEF with the message parameter equal to wGrowMsg until the mouse button is released. During this time, a pointer to the global coordinates of a modified portRect are passed to the routine that draws the growImage. I say modified portRect because when a window is resized the effected rectangle is actually a copy of the window’s portRect. Then, if so directed, QuickDraw will replace the values stored in the portRect with those of the modified copy. Finally the content and structure regions of the resized window are rebuilt accordingly. At any rate, the Rect pointer was intended for use with rectangular windows. In rectangular windows, the top left hand corner is kept stationary while the bottom right hand one is allowed to pivot. This enables such windows to be resized both horizontally and vertically. However, diamond windows only respond to mouse movement along the y-axis when being resized. In order to extract information only pertaining to the vertical direction, GrowWindowGrow() subtracts the y-coordinate of the middle of the window from the y-coordinate of the bottom of the dereferenced Rect pointer. The resultant value is then used as the length of each side.
A diamond window with a grow region will also have a slider area which is drawn in response to the wDrawGIcon message. To prevent drawing from occurring within this area a clipRgn is used. For the sake of speed and simplicity, this clipRgn is automatically created and maintained by the WDEF itself. This method creates some complications of its own however, to be discussed in the External Window Support section.
wNEW_TITLE
Title drawing is also more complicated for diamond windows than for rectangular ones. The WDEF must decide if the whole title can be displayed, whether or not it will fit down the diagonal of one half the window, etc. These things depend on the size of the window, but for a given title, the WDEF can determine threshold window sizes. However, if the title is changed, the WDEF must be informed so that it can recalculate the transitional window sizes. To this affect, the function SetDiamondWTitle() calls the WDEF with the diamond window specific message wNEW_TITLE. The WDEF then installs the new title into the window record’s titleHandle member and checks to see if the window is visible. If so, the WDEF makes the Window Manager port the current port and stores the present clip region into it. Then the clip is set to the window’s titleRgn and ClipAbove() is called to determine what portion of the titleRgn is visible. Finally, DrawWindow() is called to redraw the window with the new clipRgn enforced.
wDispose
In order to operate efficiently, auxiliary memory must be released when a diamond window is dismissed. This is done in response to the wDispose message. The function WindowDisposal() releases memory occupied by the members of the dataRecord structure. At the end of the function the dataHandle itself is released. This is permissible because the WDEF is exited prematurely when a wDispose message is serviced, thus preventing the final BlockMove() from corrupting memory by moving data into memory referenced by an invalid handle.
External Window Support
Diamond windows require greater support outside the WDEF than do rectangular ones. In a program supporting both rectangular and diamond shaped windows, I have found it useful to store descriptive numbers in the refCon members of all window records in order to differentiate between the two types. The program can either include a separate window handling routine for diamond shaped windows, or the refCon member can be tested within each case statement where it is necessary to provide alternative instructions for diamond shaped windows.
The Slider Area
Additional support is required when using sliders with diamond shaped windows because no drawing will occur if the clipRgn is not suspended before Draw1Control() is called for each slider. Despite this, it is desirable to have the WDEF maintain the clipRgn automatically, since all of the window’s other controls should be drawn with the clipRgn enforced. Therefore, a diamond window’s sliders should be clearly distinguishable from other controls, so that they can be drawn without the clipRgn’s range restrictions. This can be accomplished by coding each slider’s refCon member.
Establishing a clipRgn further restricting drawing in the content region of a diamond window also deserves to be discussed. It should be sufficient to save the former clipRgn, create and install a new one for use within the drawing routine, and finally, to reinstall the original clipRgn. Note that SetClip() creates and uses a copy of the region passed to it. It is therefore necessary to dispose of the original region after a call to SetClip().
Illustration 2: a Diamond’s portRect
The portRect
The portRect does not encompass the entire contentRgn of a diamond shaped window. Although this in itself is not problematic because the Window Manager sets aside enough memory for all onscreen drawing, offscreen drawing is another issue. Normally, offscreen buffers are set to the dimensions of the portRect. This is sufficient for diamond shaped windows possessing growRgns because the clipRgn used with such windows is completely enveloped by the portRect. However, when a programmer wishes to establish an offscreen BitMap or GrafPort for a diamond window without a grow region, the portBits.bounds member of the buffer should be of the same dimensions as the window’s portRect inset -26 pixels on each side. This will also have bearing on the rowBytes member of the BitMap and the amount of memory necessary for the actual buffer.
DragWindow()
Directly before calling DragWindow(), the titleWidth member of the window record is set to TRUE. If part of a window which was previously offscreen is moved onscreen as a result of a drag, DragWindow() will call the appropriate WDEF with the wDraw argument. The diamond window WDEF checks the value of theWindow->titleWidth each time wDraw is called for a visible window. If theWindow->titleWidth is TRUE, the WDEF will recalculate the window’s regions so that any newly visible portions of the window will be drawn. This recalculation must occur before any drawing takes place. If DragWindow() calls the diamond window WDEF, theWindow->titleWidth is set to FALSE.
Upon returning from DragWindow(), the calling routine checks to see if the titleWidth member is still set to TRUE. If so, the window’s regions are recalculated. This allows DoHit() to operate properly. If the region’s position’s were not recalculated at this time, it would be necessary to do so every time the mouse button is pressed with the cursor inside the window. This is not an efficient use of time and the resultant pause would be very noticeable because the updating would occur before a requested operation instead of after one. However, there is no need to recalculate the region’s positions if the titleWidth member of the window is FALSE, because this means the window’s regions were already updated when DragWindow() called the WDEF.
The titleWidth member is used in this manner because it is not used for any other purpose and otherwise it would be necessary to extract the information from the window’s dataHandle - a task requiring considerably more dereferencing.
GrowWindow()
A size restriction should always be passed when GrowWindow() is called to resize a diamond window. Otherwise a user will be able to pull the bottom of the window over its top. In order for size restrictions to work properly, the value passed to GrowWindow() must be adjusted to account for the rate at which diamond windows grow and shrink.
Initially windHeight holds the hi word of the value returned by GrowWindow() -- the low word is inconsequential since only movement along the vertical axis effects a diamond window’s size. If the variable windHeight were passed to SizeWindow() without modification, the window would be incorrectly resized. The reason for this becomes clear if you think carefully about what is actually being stored in the variable. When a diamond window is resized, the new size is only adjusted from the bottom. However, diamond windows grow and shrink around their centers. It is therefore necessary to alter the window’s size at its top by the same amount it was changed at its bottom. This amounts to subtracting the difference in sizes between the size of the old portRect and the value stored in windHeight (the difference can be positive or negative). This value, called offset, is also used to properly offset the window in the horizontal and vertical directions.
SetDiamondWTitle()
Instead of calling SetWTitle() to change a diamond window’s title, call SetDiamondWTitle(). This function in turn calls the WDEF, passing the new title as an argument.
Final Notes
The CallPascalL() routine
When making a WDEF that is called using the CallPascalL() routine, be careful not to call the WDEF using the standard predefined messages. These have special significance to the Window Manager, and will generally not operate as intended. Instead, define your own message and have the WDEF respond to it. Simply stack the two case statements so that they apply to the same instructions.
contRgn and strucRgn
One of the most difficult aspects of creating WDEFs is making the clipRgns and strucRgns correspond correctly to one another. To help solve this difficulty I found it useful to make an application, open a standard window using it, and to draw the clipRgn and strucRgn within it. The application should erase the clipRgn after drawing the window’s frame because this is what the Window Manager does when it first draws a window, or any part of a window that was just uncovered. For this reason, the window will not have an outline if the strucRgn is not larger than the contRgn. Also, in order for a window to have a drop shadow, the strucRgn should to be large enough to contain that graphic. During this stage of window development it is important to remember that the QuickDraw pen draws one pixel down and one pixel to the right of the actual pen location.
Entering the WDEF source code
WDEFs are CODE resources. Before you can actually compile a CODE resource, you need to tell the compiler that that is your intention. If you are using THINK C, under the Project menu select “Set Project Type ”. When the dialog box appears fill it in as follows:
Illustration 3: the Set Project Type Dialog Box
Once you have successfully created your WDEF resource you will need to make a new, standard project in which to place WorkDiamondWinds.c, the program that helps control the diamond windows. Do not forget to open the resource containing the WDEF code. When THINK C opens a project it looks in that folder for a resource file having the same name as the project but with “.rsrc” appended to it. If it finds one, it will automatically open that file. Note that any special characters used to indicate that a file is a project are considered part of its name.
Footnote
1 The Window Manager requests actions from a WDEF by sending it messages. Depending on the nature of the request, the WDEF may return a meaningful message of its own. If this does not sound familiar, take a cursory glance at Inside Macintosh Volume 1, Chapter nine, “Defining Your Own Windows”.
/* ============================================================ File: Diamond.h Function: Header file for Diamond Windows. History: Last modification -- 04/25/91 -- Marz. ============================================================ */ #include <stddef.h> #define MAKE_EVEN0xFFFE typedef struct { Rect myRect, stdRect; Booleanresizable, zoomedOut; PolyHandle goAwayPoly, growPoly, zoomPoly; RgnHandletitleRgn, goAwayRgn, growRgn, zoomRgn; short midX, midY, halfTitleSpace, leftStop, numChars; } DataRecord, **DataRecordHdl;
/* ========================================================== File: DiamondDef.c Function: Defines the Diamond Window. History: 7/4/90 & 8/26/90 - 12/1/90 & 2/15/91 - 4/22/91 : Marz. ============================================================ */ #include “DiamondDef.h” #include <SetUpA4.h> #define wJUST_DRAGGED50 #define wNEW_TITLE 51 #define DRAW_WINDOW_FRAME 0 #define ZOOM_MASK8 #define NO_GROW_MASK 4 #define SCREEN_MARGIN3 #define FRAME_WIDTH25 #define SHADOW 3 #define LEFT_SIDETRUE #define FULL_RESERVE 51 #define TOP_RESERVE30 #define BOTTOM_RESERVE 13 #define FIRST_CHAR 1 static Pattern white = {0}, black = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF,0xFF, 0xFF, 0xFF}, gray = {0xAA, 0x55, 0xAA, 0x55, 0xAA, 0x55, 0xAA, 0x55}; DataRecorddataRecord; DataRecordHdl dataRecordHdl; /* ========================================================= */ void CalcRgns(WindowPeek theWindow) { /* Calculates the structure, content, and title regions of diamond windows when they are created or after they have been dragged or resized. */ GrafPtr savedPort; Rect theRect, strucRect, polyRect; short halfPort, halfStruc, xOffset, yOffset; theRect = theWindow->port.portRect; /* The contentRgn extends beyond the portRect. This means origin is automatically offset so that it begins just outside the scroll bar area, regardless of whether or not the window actually has a grow region. */ halfPort = halfStruc = (theRect.right - theRect.left) >> 1; halfStruc += 26; /* This routine needs the portRect in Global coordinates for drawing in the WMgr port. By switching the current port to the window’s port and pretending a rectangle is two points this can be achieved. */ GetPort(&savedPort); SetPort(theWindow); LocalToGlobal(&topLeft(theRect)); LocalToGlobal(&botRight(theRect)); SetPort(savedPort); if (EqualRect(&theRect, &dataRecord.stdRect)) { /* window was resized by being zoomed, don’t change dataRecord.myRect, it holds the previous size of the portRect for use with inZoomIn. */ strucRect = theRect; dataRecord.zoomedOut = TRUE; } else { /* window has been resized w/o being zoomed, save the new window size for later inZoom-ing. */ dataRecord.myRect = strucRect = theRect; dataRecord.zoomedOut = FALSE; } /* Get the strucRect. dataRecord.midX and dataRecord.midY are the Global coordinates of the middle of the window. */ InsetRect(&strucRect, -26, -26); dataRecord.midX = (strucRect.left + strucRect.right) >> 1; dataRecord.midY = (strucRect.top + strucRect.bottom) >> 1; /* Get the strucRgn*/ OpenRgn(); MoveTo(strucRect.left, dataRecord.midY); Line(halfStruc, -halfStruc); Line(2, 0); Line(halfStruc, halfStruc); Line(0, 1); Line(-halfStruc, halfStruc); Line(-2, 0); Line(-halfStruc, -halfStruc); Line(0, -1); CloseRgn(theWindow->strucRgn); /* Define the titleRgn. There are a couple of notes of interest here. 1)ErasePoly() actually calls NewRgn() and makes a region out of the polygon in order to know what to erase. 2)I only used titlePoly to erase the title area anyway so why not just make it a region and save time? */ OpenRgn(); MoveTo(theRect.left - 26, dataRecord.midY); Line(26, 0); Line(halfPort, halfPort); Line(halfPort, -halfPort); Line(26, 0); Line(-halfStruc, halfStruc); Line(-halfStruc, -halfStruc); CloseRgn(dataRecord.titleRgn); /* Define the content region. */ halfStruc --; OpenRgn(); MoveTo(dataRecord.midX, theRect.top - 25); Line(halfStruc, halfStruc); Line(-25, 0); Line(-halfPort, halfPort); Line(-halfPort, -halfPort); Line(-25, 0); Line(halfStruc, -halfStruc); CloseRgn(theWindow->contRgn); /* The following lines offset various window parts to the updated locations. The window parts are only updated if they are present. */ if (theWindow->goAwayFlag) { HLock(dataRecord.goAwayPoly); polyRect = (**(dataRecord.goAwayPoly)).polyBBox; HUnlock(dataRecord.goAwayPoly); xOffset = -polyRect.left + strucRect.left + 18; yOffset = -polyRect.top + dataRecord.midY + 5; OffsetPoly(dataRecord.goAwayPoly, xOffset, yOffset); OffsetRgn(dataRecord.goAwayRgn, xOffset, yOffset); } if (theWindow->spareFlag) { HLock(dataRecord.zoomPoly); polyRect = (**(dataRecord.zoomPoly)).polyBBox; HUnlock(dataRecord.zoomPoly); xOffset = -polyRect.left + strucRect.right - 34; yOffset = -polyRect.top + dataRecord.midY + 5; OffsetPoly(dataRecord.zoomPoly, xOffset, yOffset); OffsetRgn(dataRecord.zoomRgn, xOffset, yOffset); } if (dataRecord.resizable) { HLock(dataRecord.growPoly); polyRect = (**(dataRecord.growPoly)).polyBBox; HUnlock(dataRecord.growPoly); xOffset = -polyRect.left + dataRecord.midX - 8; yOffset = -polyRect.top + strucRect.bottom - 24; OffsetPoly(dataRecord.growPoly, xOffset, yOffset); OffsetRgn(dataRecord.growRgn, xOffset,yOffset); /* Make the clipRgn which will prevent drawing from occuring within the slider area. This region will later have to be suspended to allow for the drawing of the sliders themselves. When Working with clipRgns it is important to remember how the Mac coordinate system works. Recall that the pen hangs down and to the right one pixel of the actual location of the pen. The following few lines compensate for this */ SetPort(theWindow); OpenRgn(); theRect = theWindow->port.portRect; MoveTo(theRect.left, theRect.top + halfPort); Line(1, 0); Line(halfPort - 1, -halfPort + 1); Line(halfPort - 1, halfPort - 1); Line(1, 0); Line(-halfPort, halfPort); Line(-halfPort, -halfPort); CloseRgn(theWindow->port.clipRgn); SetPort(savedPort); } /* Find how much space is available in each window half for writing the title in. */ dataRecord.halfTitleSpace = halfStruc - FULL_RESERVE; } void ToggleGoAwayBox() { /* Indicates when the close region of a diamond window is selected by drawing an asterisk-like symbol within the region. First the image is drawn into an offscreen BitMap using StuffHex(), then the image is tranferred to the WMgrPort by means of the CopyBits() procedure. */ BitMap closeBitMap; GrafPtr windMngrPort; Rect tempRect, myRect; closeBitMap.baseAddr = NewPtr(0x34); StuffHex(closeBitMap.baseAddr, “002000200020012400A80000”); StuffHex(closeBitMap.baseAddr + 12, “0F8F800000A801240020002000200”); closeBitMap.rowBytes = 2; closeBitMap.bounds.top = closeBitMap.bounds.left = 0; closeBitMap.bounds.bottom = closeBitMap.bounds.right = 13; myRect = closeBitMap.bounds; tempRect = (**dataRecord.goAwayPoly).polyBBox; OffsetRect(&myRect, tempRect.left + 2, tempRect.top + 2); GetWMgrPort(&windMngrPort); CopyBits(&closeBitMap, &windMngrPort->portBits, &closeBitMap.bounds, &myRect, srcXor, NULL); DisposPtr(closeBitMap.baseAddr); } void ToggleZoomBox() { /* As ToggleGoAwayBox(). */ BitMap zoomBitMap; GrafPtr windMngrPort; Rect tempRect, myRect; zoomBitMap.baseAddr = NewPtr(0x34); StuffHex(zoomBitMap.baseAddr, “0020002000A0016400A80010”); StuffHex(zoomBitMap.baseAddr + 12, “0F8F801000A8016400A0002000200”); zoomBitMap.rowBytes = 2; zoomBitMap.bounds.top = zoomBitMap.bounds.left = 0; zoomBitMap.bounds.bottom = zoomBitMap.bounds.right = 13; myRect = zoomBitMap.bounds; tempRect = (**dataRecord.zoomPoly).polyBBox; OffsetRect(&myRect, tempRect.left + 2, tempRect.top + 2); GetWMgrPort(&windMngrPort); CopyBits(&zoomBitMap, &windMngrPort->portBits, &zoomBitMap.bounds, &myRect, srcXor, NULL); DisposPtr(zoomBitMap.baseAddr); } void EraseTitleSpace(Boolean leftSide, short length) { /* Clears space for the window’s title to be drawn in. */ RgnHandle theRgn; theRgn = NewRgn(); OpenRgn(); if (leftSide) { Line(length, length); Line(11, -11); Line(-length, -length); Line(-11, 11); } else { Line(length, -length); Line(-11, -11); Line(-length, length); Line(11, 11); } CloseRgn(theRgn); EraseRgn(theRgn); DisposeRgn(theRgn); } void DrawChars(startSpot, stopSpot, theTitle) short startSpot, stopSpot; PtrtheTitle; { /* Draws the characters of the window’s title on a diagonal slant. If (start == FIRST_CHAR) then text is drawn on a downward slant, otherwise text is drawn on an upward slant beginning with the character specified by startSpot. */ char ch; short yOffset, index, charWidth, xAdjust; if (startSpot == FIRST_CHAR) yOffset = 8; else yOffset = -8; index = startSpot; while (index <= stopSpot) { ch = *(theTitle + index); charWidth = CharWidth(ch); xAdjust = charWidth >> 1; Move(-xAdjust, 0); DrawChar(ch); Move(-(charWidth - xAdjust) + 8, yOffset); index ++; } } void DrawTitle(WindowPeek theWindow, Rect strucRect) { /* Decides how text should appear, depending on the size of the window and its title. Positions the pen and oversees text drawing. */ PtrtheTitle; short totalWidth, oneSide, adjust, penOffset, mostChars, leftChars; StringHandletitleHandle; titleHandle = theWindow->titleHandle; HLock(titleHandle); theTitle = (Ptr) *titleHandle; totalWidth = (dataRecord.numChars << 3) + 10; oneSide = (strucRect.right - strucRect.left) >> 1; if (totalWidth <= dataRecord.halfTitleSpace) { adjust = ((oneSide - totalWidth) >> 1) + 7; MoveTo(strucRect.left + adjust, dataRecord.midY + adjust); EraseTitleSpace(LEFT_SIDE, totalWidth); Move(16, 7); DrawChars(FIRST_CHAR, dataRecord.numChars, theTitle); } else { mostChars = dataRecord.numChars - dataRecord.leftStop; if (mostChars < dataRecord.leftStop) mostChars = dataRecord.leftStop; if ((mostChars << 3) < (dataRecord.halfTitleSpace)) { /* word break on space */ penOffset = (dataRecord.leftStop << 3) + 5; MoveTo(dataRecord.midX - BOTTOM_RESERVE - 3, strucRect.bottom - BOTTOM_RESERVE - 3); Move(-penOffset, -penOffset); EraseTitleSpace(LEFT_SIDE, penOffset); Move(14, 5); DrawChars(FIRST_CHAR, dataRecord.leftStop, theTitle); /* don’t forget to remove the excess space */ penOffset = (dataRecord.numChars - dataRecord.leftStop - 1) << 3; MoveTo(dataRecord.midX + BOTTOM_RESERVE + 3, strucRect.bottom - BOTTOM_RESERVE - 3); EraseTitleSpace(!LEFT_SIDE, penOffset + 5); Move(1, -8); DrawChars(dataRecord.leftStop + 2, dataRecord.numChars, theTitle); } else { /* no word break on space*/ leftChars = dataRecord.halfTitleSpace >> 3; penOffset = dataRecord.halfTitleSpace + 4; MoveTo(dataRecord.midX - BOTTOM_RESERVE - 3, strucRect.bottom - BOTTOM_RESERVE - 3); Move(-penOffset, -penOffset); EraseTitleSpace(LEFT_SIDE, penOffset); Move(14, 5); DrawChars(FIRST_CHAR, leftChars, theTitle); MoveTo(dataRecord.midX + BOTTOM_RESERVE + 3, strucRect.bottom - BOTTOM_RESERVE - 3); mostChars = leftChars << 1; if (mostChars > dataRecord.numChars) { mostChars = dataRecord.numChars; penOffset = ((dataRecord.numChars - leftChars) << 3) + 4; } EraseTitleSpace(!LEFT_SIDE, penOffset); Move(0, -7); DrawChars(leftChars + 1, mostChars, theTitle); } } HUnlock(titleHandle); } void DrawWindow(WindowPeek theWindow, long param) { /* Draws diamond window frames and titles as appropriate. */ Rect strucRect; short halfPort, halfStruc, index; if (theWindow->visible) switch(LoWord(param)) { case wInGoAway: ToggleGoAwayBox(); break; case wInZoomIn: case wInZoomOut: ToggleZoomBox(); break; default: /* Draw window frame.*/ if (theWindow->titleWidth) { CalcRgns(theWindow); theWindow->titleWidth = FALSE; } if (dataRecord.zoomedOut) strucRect = dataRecord.stdRect; else strucRect = dataRecord.myRect; InsetRect(&strucRect, -26, -26); halfStruc = halfPort = (strucRect.right - strucRect.left) >> 1; halfPort -= 26; MoveTo(strucRect.left, dataRecord.midY); Line(halfStruc, -halfStruc); PenSize(3, 1); Line(halfStruc, halfStruc); Line(-halfStruc, halfStruc); PenSize(1, 1); Line(-halfStruc, -halfStruc); /* Draw content stuff*/ EraseRgn(dataRecord.titleRgn); /* Outline the content region {and the title region} */ Line(26, 0); Line(halfPort, halfPort); Line(halfPort, -halfPort); Line(25, 0); if (theWindow->hilited) { MoveTo(strucRect.left + 23, dataRecord.midY + 2); index = halfStruc - 3; for (halfStruc = index - 20; halfStruc < index; halfStruc += 4) { Line(halfStruc, halfStruc); Line(halfStruc, -halfStruc); Move(-(halfStruc << 1) - 4, 0); } if (theWindow->goAwayFlag) { PenPat(&white); PenSize(1, 1); MoveTo(strucRect.left + 17, dataRecord.midY + 12); Line(8, -8); Move(0, 20); Line(10, -10); PenPat(&black); EraseRgn(dataRecord.goAwayRgn); FramePoly(dataRecord.goAwayPoly); } if (theWindow->spareFlag) { PenPat(&white); PenSize(1, 1); MoveTo(strucRect.right - 17, dataRecord.midY + 12); Line(-8, -8); Move(0, 20); Line(-10, -10); PenPat(&black); EraseRgn(dataRecord.zoomRgn); FramePoly(dataRecord.zoomPoly); } if (dataRecord.resizable) { InsetRgn(dataRecord.growRgn, -2, 0); EraseRgn(dataRecord.growRgn); InsetRgn(dataRecord.growRgn, 2, 0); FramePoly(dataRecord.growPoly); } } /* if window is hilited*/ DrawTitle(theWindow, strucRect); break; } /* end switch */ } void NewTitle(WindowPeek theWindow, Ptr theTitle) { /* Resets the handle size for the window’s title, then BlockMove()s the new information into it. Next the space closest to the true center of the title is found and recorded in the variable leftStop {if no space is found the entire title’s length is stored in leftStop}. This information, coupled with the window’s current size, is used to determine how the the window’s title should be drawn {all on the left side, split at a space and part drawn on each side, etc.}. NewTitle() should only be called when the window is given a new title. */ char ch; GrafPtr savedPort; PtrmiddleChar; RgnHandle theRgn; short leftChars, index; StringHandletitleHandle; WindowPeekwindMgrPort; dataRecord.numChars = *theTitle; titleHandle = theWindow->titleHandle; SetHandleSize(titleHandle, dataRecord.numChars + 1); BlockMove(theTitle, *titleHandle, dataRecord.numChars + 1); HLock(titleHandle); leftChars = dataRecord.numChars >> 1; /* divide in half */ middleChar = theTitle + leftChars; for (index = 0; index <= leftChars; index ++) { ch = *(middleChar - index); if (ch == 0x20) { dataRecord.leftStop = leftChars - index - 1; break; } else { ch = *(middleChar + index); if (ch == 0x20) { dataRecord.leftStop = leftChars + index - 1; break; } } } if (index > leftChars) dataRecord.leftStop = dataRecord.numChars; HUnlock(titleHandle); /* When dataRecord.titleRgn == NULL, the window is new and therefore its titleRgn has not yet been properly set up by CalcRgns(). Setting a clipRgn to an uninitialized region is a fatal error so SetClip() should NOT be called under this circumstance. */ if ((theWindow->visible) && (dataRecord.titleRgn != NULL)) { GetPort(&savedPort); GetWMgrPort(&windMgrPort); SetPort(windMgrPort); theRgn = NewRgn(); GetClip(theRgn); /* The visRgn does not include any of the window’s strucRgn, only the visible portion of its contRgn. There’s no point in dealing with the entire visible strucRgn, just the part of it used to display the window’s title since that’s all that’s being altered. So the WDEF just sets the window manager’s clipRgn to the window’s titleRgn and calls ClipAbove() to subtract the strucRgns of all visible window’s in front of the window whos title has been changed. */ SetClip(dataRecord.titleRgn); ClipAbove(theWindow); DrawWindow(theWindow, DRAW_WINDOW_FRAME); SetClip(theRgn); /* SetClip() copies the specified region into the clipRgn member of the current port. It’s up to the programmer to release the memory occupied by the original region. */ DisposeRgn(theRgn); SetPort(savedPort); } } void DrawGrowIcon(WindowPeek theWindow) { /* Draws the part of the grow icon that is in the content region of the window. It is not feasible to draw the gIcon as part of the window frame because, although the icon is properly drawn with much less effort, it is often times incorrectly erased by the Window Manager when the window is resized {the WManager has to erase the content region to ensure that no desktop slop shows through}. */ GrafPtr savedPort; PenStatesavedPenState; Rect portRect; RgnHandle clipRgn; short halfPort; if (dataRecord.resizable) if (theWindow->visible) { GetPort(&savedPort); SetPort(theWindow); GetPenState(&savedPenState); PenNormal(); clipRgn = NewRgn(); GetClip(clipRgn); /* Must take into consideration the coordinates of the origin in case SetOrigin() has been called with values other than (0, 0). Remember, this drawing occurs within the window’s own grafport. */ portRect = theWindow->port.portRect; halfPort = (portRect.right - portRect.left) >> 1; MoveTo(portRect.left, portRect.top + halfPort); portRect.top -= 26; ClipRect(&portRect); Line(halfPort, -halfPort); Line(0, -25); Move(0, 25); Line(halfPort, halfPort); SetPenState(&savedPenState); SetClip(clipRgn); DisposeRgn(clipRgn); SetPort(savedPort); } } void GrowWindowGrow(theWindow, rectPtr) WindowPeektheWindow; Rect *rectPtr; { /* Draws the grow image for the window. Diamond windows grow and shrink at twice the normal rate and only movement in the y-direction effects them when they are being resized. To find the new length of each side, (*rectPtr).bottom is subtracted from dataRecord.midY, the y-coordinate of the middle of the window. */ short length, longLength; length = longLength = rectPtr->bottom - dataRecord.midY - 1; longLength += 26; MoveTo(dataRecord.midX - length, dataRecord.midY); PenPat(&white); Line(length, -length); Line(length, length); Line(-length, length); Line(-length, -length); PenPat(&gray); Line(-26, 0); Move(longLength, -length); Line(0, -26); Move(length, longLength); Line(26, 0); PenPat(&white); Line(-longLength, longLength); Line(-longLength, -longLength); Line(longLength, -longLength); Line(longLength, longLength); /* The Window Manager automatically resets the pen pattern to black when it stops calling this function. */ } void SetUpStdZoom(void) { /* Sets up the stdState Rect so the window will be zoom ready. This rectangle is always centered onscreen and does not take into account any maximum window size you may entend to enforce using GrowWindow(). */ GrafPtr windMPort; Rect theRect; short xDistance, yDistance; GetPort(&windMPort); theRect = windMPort->portRect; InsetRect(&theRect, SCREEN_MARGIN, SCREEN_MARGIN + FRAME_WIDTH); theRect.top += MBarHeight; theRect.right -= SHADOW; theRect.bottom -= 2; /* Make sure x and yDistance are even. */ xDistance = (theRect.right - theRect.left) & MAKE_EVEN; yDistance = (theRect.bottom - theRect.top) & MAKE_EVEN; if (xDistance > yDistance) { OffsetRect(&theRect, (xDistance - yDistance) >> 1, 0); theRect.right = theRect.left + yDistance; } else if (yDistance > xDistance) { OffsetRect(&theRect, 0, (yDistance - xDistance) >> 1); theRect.bottom = theRect.top + xDistance; } dataRecord.stdRect = theRect; } void InitNewWindow(WindowPeek theWindow) { /* Sets up various window regions and allocates memory necessary for the operation of diamond shaped windows. */ Rect theRect; Str255 theTitle; theWindow->strucRgn = NewRgn(); theWindow->contRgn = NewRgn(); if (theWindow->goAwayFlag) { dataRecord.goAwayPoly = OpenPoly(); MoveTo(0, 0); Line(8, -8); Line(8, 8); Line(-8, 8); Line(-8, -8); ClosePoly(); dataRecord.goAwayRgn = NewRgn(); OpenRgn(); FramePoly(dataRecord.goAwayPoly); CloseRgn(dataRecord.goAwayRgn); } if (dataRecord.resizable) { dataRecord.growPoly = OpenPoly(); MoveTo(0, 0); Line(8, -8); Line(8, 8); Line(-8, 8); Line(-8, -8); Line(5, -5); Line(-2, -2); Line(5, -5); Line(5, 5); Line(-1, 1); ClosePoly(); dataRecord.growRgn = NewRgn(); OpenRgn(); MoveTo(0, 0); Line(5, -5); Line(-2, -2); Line(5, -5); Line(5, 5); Line(-2, 2); Line(5, 5); Line(-8, 8); Line(-8, -8); CloseRgn(dataRecord.growRgn); } if (theWindow->spareFlag) { dataRecord.zoomPoly = OpenPoly(); MoveTo(5, -5); Line(3, -3); Line(8, 8); Line(-8, 8); Line(-8, -8); Line(5, -5); Line(5, 5); Line(-5, 5); ClosePoly(); dataRecord.zoomRgn = NewRgn(); OpenRgn(); FramePoly(dataRecord.goAwayPoly); CloseRgn(dataRecord.zoomRgn); SetUpStdZoom(); dataRecord.zoomedOut = FALSE; } /* Initialize the global variable dataRecordHdl so data can be transferred from the global variable dataRecord into the window’s private storage area. */ dataRecordHdl = (DataRecordHdl) NewHandle(sizeof(DataRecord)); theWindow->dataHandle = (Handle) dataRecordHdl; theRect = theWindow->port.portRect; if (theRect.bottom > theRect.right) { /* To ensure that each side of a window’s portRect is even, the value is ANDed with MAKE_EVEN, that is 0xFFFE. */ theRect.right &= MAKE_EVEN; theRect.bottom = theRect.right; } else { theRect.bottom &= MAKE_EVEN; theRect.right = theRect.bottom; } theWindow->port.portRect = theRect; /* Save title information that will allow diamond window title to be drawn more quiclky. */ BlockMove(*(theWindow->titleHandle), theTitle, 0xFF); dataRecord.titleRgn = NULL; NewTitle(theWindow, (Ptr) theTitle); dataRecord.titleRgn = NewRgn(); } long DoHit(WindowPeek theWindow, Point mouseClick) { /* Determines if a diamond window was hit by a mouseClick. If so, returns the region in which the click occured. */ if (theWindow->visible) if (theWindow->hilited) { if (theWindow->goAwayFlag) if (PtInRgn(mouseClick, dataRecord.goAwayRgn)) return(wInGoAway); if (dataRecord.resizable) if (PtInRgn(mouseClick, dataRecord.growRgn)) return(wInGrow); if (theWindow->spareFlag) if (PtInRgn(mouseClick, dataRecord.zoomRgn)) return(dataRecord.zoomedOut ? wInZoomIn : wInZoomOut); if (PtInRgn(mouseClick, dataRecord.titleRgn)) return(wInDrag); if (PtInRgn(mouseClick, theWindow->contRgn)) return(wInContent); } else /* if window is not hilited */ { if (PtInRgn(mouseClick, dataRecord.titleRgn)) return(wInDrag); if (PtInRgn(mouseClick, theWindow->strucRgn)) return(wInContent); } } void WindowDisposal(WindowPeek theWindow) { /* Releases memory occupied by auxiliary window data. */ DisposeRgn(dataRecord.titleRgn); if (theWindow->goAwayFlag) { KillPoly(dataRecord.goAwayPoly); DisposeRgn(dataRecord.goAwayRgn); } if (dataRecord.resizable) { KillPoly(dataRecord.growPoly); DisposeRgn(dataRecord.growRgn); } if (theWindow->spareFlag) { KillPoly(dataRecord.zoomPoly); DisposeRgn(dataRecord.zoomRgn); } DisposHandle(theWindow->dataHandle); } pascal long main(varCode, theWindow, message, param) short varCode; WindowPeektheWindow; short message; long param; { /* Sets up registers, copies dataHandle information into global variables, dispatches control to other routines, and copies updated information back into the window’s dataHandle. */ long returnVal = 0L; RememberA0(); SetUpA4(); if (message != wNew) { dataRecordHdl = (DataRecordHdl) theWindow->dataHandle; BlockMove(*dataRecordHdl, &dataRecord, sizeof(DataRecord)); } switch(message) { case wDraw: DrawWindow(theWindow, param); break; case wHit: returnVal = DoHit(theWindow, topLeft(param)); break; case wJUST_DRAGGED: theWindow->titleWidth = FALSE; case wCalcRgns: CalcRgns(theWindow); break; case wNew: theWindow->spareFlag = varCode & ZOOM_MASK; dataRecord.resizable = !(varCode & NO_GROW_MASK); InitNewWindow(theWindow); break; case wDispose: WindowDisposal(theWindow); RestoreA4(); return(returnVal); break; case wDrawGIcon: DrawGrowIcon(theWindow); break; case wGrow: GrowWindowGrow(theWindow, (Rect *) param); break; case wNEW_TITLE: NewTitle(theWindow, (Ptr) param); break; } HLock(dataRecordHdl); BlockMove(&dataRecord, *dataRecordHdl, sizeof(DataRecord)); HUnlock(dataRecordHdl); RestoreA4(); return(returnVal); } /* ============================================================ File: WorkDiamondWinds.c Function: Controls Diamond Windows. History: 7/4/90 & 8/26/90 - 1/16/91 & 2/15/91 & 4/15/91 - 4/22/91 : Marz. This file contains additional code illustrating the appropriate methodology for operating Diamond Windows. ============================================================ */ #include“WindowMgr.h” #include“DiamondDef.h” #define NO_VARIATION 0 #define wJUST_DRAGGED50 #define wNEW_TITLE 51 #define FLUSH_EVENTS 0 #define VISIBLE TRUE #define DIAMOND_DOC_PROC_PLUS_ZOOM 16008 #define NO_GROW_DIAMOND_PROC16012 #define PLACE_IN_FRONT -1L #define GO_AWAY_BOXTRUE #define NULL_REF_NUM 0 typedef struct ZoomInfo { short top; short midX; short length; } ZoomInfo; EventRecord theEvent; /* ========================================================= */ void ZoomDiamondFrame(theWindow, expand) WindowPeektheWindow; Boolean expand; { /* This function expands or shrinks a series of diamonds around the About Diamond when it is being Zoomed. It’s a very nice effect because it takes the user’s mind off how long it’s taking her or his window’s contents to be redrawn and it also it looks cool. *********************** Acknowledgement *********************** I found a routine for drawing zoom indicator lines around windows in the Febuary 1987 issue of MacTutor. I modified the original code written by Jean Decombe so that it would work well with diamond shaped windows and optimized it a touch by performing all division operations as bit shifts, using the Line() command instead of LineTo(), and by using the % {mod} function to reduce the number of necessary storage areas {normally rectangles, ZoomInfos in this case}. */ GrafPtr savedPort, deskPort; Rect startRect, endRect, zoomRect; long unit; short index, topDiff, leftDiff, bottomDiff, rightDiff; ZoomInfozoomSpot[4], holder; startRect = ((WStateData*) *(theWindow->dataHandle)) ->stdState; endRect = ((WStateData*) *(theWindow->dataHandle)) ->userState; InsetRect(&startRect, -26, -26); InsetRect(&endRect, -26, -26); if (expand) { zoomRect = startRect; startRect = endRect; endRect = zoomRect; } topDiff = endRect.top - startRect.top; leftDiff = endRect.left - startRect.left; bottomDiff = endRect.bottom - startRect.bottom; rightDiff = endRect.right - startRect.right; GetPort(&savedPort); GetWMgrPort(&deskPort); InitPort(deskPort); PenMode(notPatXor); PenPat(&white); for (index = 0; index <= 20; index ++) { if (index >= 4) { holder = zoomSpot[index % 4]; MoveTo(holder.midX, holder.top); Line(holder.length, holder.length); Line(-holder.length, holder.length); Line(-holder.length, -holder.length); Line(holder.length, -holder.length); } if (index <= 16) { zoomRect = startRect; unit = ((expand ? index + 1: 33 - index) * index) >> 1; zoomRect.top += (unit * topDiff) >> 7; zoomRect.left += (unit * leftDiff) >> 7; /* zoomRect.bottom never needs to be adjusted because diamond shaped windows grow in the horizontal and vertical directions at the same rate. */ zoomRect.right += (unit * rightDiff) >> 7; holder.top = zoomRect.top; holder.midX = (zoomRect.right + zoomRect.left) >> 1; holder.length = (zoomRect.right - zoomRect.left) >> 1; MoveTo(holder.midX, holder.top); Line(holder.length, holder.length); Line(-holder.length, holder.length); Line(-holder.length, -holder.length); Line(holder.length, -holder.length); zoomSpot[index % 4] = holder; } } PenMode(patCopy); PenPat(&black); SetPort(savedPort); } Boolean DoMouseDown(thePart, theWindow) short thePart; WindowPtr theWindow; { /* Handles mouse clicks. Returns TRUE if the window was clicked in its close box. */ Boolean disposedWindow = FALSE; Handle wDefHdl; long newSize; Rect growRect, sizeRestrict, theRect; RgnHandle theRgn, strucRectRgn; short adjust, offset, currentSize; WindowPeekwindPkr; if (theWindow != NULL) SetPort(theWindow); switch(thePart) { case inDesk: case inSysWindow: SystemClick(&theEvent, theWindow); break; case inDrag: windPkr = (WindowPeek) theWindow; /* The Window Manger automatically calls WDEFs passing the wDraw message when part of a window is dragged back onscreen after having been offscreen. This segment of code sets the dragged member of the DataRecord structure, if the WDEF is called the dragged member will be set to FALSE. If it remains TRUE after the DragWindow() procedure has been executed then the window’s regions need to be updated and the WDEF is called to achieve this. All this is necessary because when a window is dragged offscreen and then back on, the WDEF must recalculate its regions BEFORE redrawing the window, so that the full visible portion of the window is redrawn. */ windPkr->titleWidth = TRUE; DragWindow(theWindow, theEvent.where, &screenBits.bounds); /* The WDEF should only be called here when <dataRecord>dragged == FALSE. Otherwise the diamond window’s regions would be recalculated twice {what a waste}. The Diamond WDEF automatically sets <dataRecord>.dragged to FALSE when called with the wJUST_DRAGGED message. */ if (windPkr->titleWidth) { wDefHdl = windPkr->windowDefProc; HLock(wDefHdl); CallPascalL(NO_VARIATION, windPkr, wJUST_DRAGGED, 0L, *wDefHdl); HUnlock(wDefHdl); } if (theWindow != FrontWindow()) if (!(theEvent.modifiers & cmdKey)) SelectWindow(theWindow); break; case inGrow: /* The size restriction is actually 50 for the lower limit and 400 for the upper limit. However, due to the nature of Diamond Windows only half these values are used. */ growRect = theWindow->portRect; currentSize = (growRect.right - growRect.left) >> 1; sizeRestrict.top = sizeRestrict.left = currentSize + 28; sizeRestrict.bottom = sizeRestrict.right = currentSize + 200; newSize = GrowWindow(theWindow, theEvent.where, &sizeRestrict); /* adjust originally holds a value which is too large, again due to the rate at which diamond windows grow and shrink. This value is ANDed with 0xFFFE to ensure that the resultant number is even. The result must then be manipulated so that it corresponds to the actual new size the window should be. */ /* Only HiWord() because movement left or right is inconsequential. */ adjust = HiWord(newSize) & MAKE_EVEN; if ((adjust != 0) && (adjust != (currentSize << 1))) { /* in case the origin has been offset */ offset = (adjust - (growRect.right - growRect.left)); LocalToGlobal(&topLeft(growRect)); ShowHide(theWindow, FALSE); SizeWindow(theWindow, adjust + offset, adjust + offset, FALSE); MoveWindow(theWindow, growRect.left - offset, growRect.top - offset, TRUE); ShowHide(theWindow, TRUE); } break; case inGoAway: if (TrackGoAway(theWindow, theEvent.where)) { DisposeWindow(theWindow); disposedWindow = TRUE; } break; case inContent: if (theWindow != FrontWindow()) SelectWindow(theWindow); break; case inZoomIn: case inZoomOut: if (TrackBox(theWindow, theEvent.where, thePart)) { ZoomDiamondFrame((WindowPeek) theWindow, thePart == inZoomOut); ShowHide(theWindow, FALSE); ZoomWindow(theWindow, thePart, TRUE); ShowHide(theWindow, TRUE); } break; } return(disposedWindow); } void UpdateDiamond(theWindow) WindowPeektheWindow; { Rect rgnRect = {20, 10, 180, 190}; PaintRect(&rgnRect); } void SetDiamondWTitle(theWindow, newTitle) PtrtheWindow; Str255 newTitle; { /* Use the following lines to change a diamond window’s title. */ Handle wDefHdl; wDefHdl = ((WindowPeek) theWindow)->windowDefProc; HLock(wDefHdl); CallPascalL(0, theWindow, wNEW_TITLE, newTitle, *wDefHdl); HUnlock(wDefHdl); } void DiamondWindowTest() { /* Operates diamond shaped windows demonstrating many of the WDEF’s abilities. */ GrafPtr oldPort; Handle wDefHdl; Rect windRect = {50, 50, 215, 215}, theRect; short openWindows, thePart; Str255 newTitle = “\pThe Only Window”; WindowPtr theWindow; NewWindow(NULL, &windRect, “\pDiamond Window”, VISIBLE, DIAMOND_DOC_PROC_PLUS_ZOOM, PLACE_IN_FRONT, GO_AWAY_BOX, NULL_REF_NUM); /* When you wish to define diamond windows from resource definitions, everything should be set up normally. Then, once you are satisfied with the configuration, go back and add an offset to the procID member to reflect the use of a custom WDEF. The offset is the ID number assigned to the WDEF multiplied by 16. In this case the ID number was 1000, so the offset is (16 * 1000) or 16000. However, DIAMOND_DOC_PROC_PLUS_ZOOM = 16008. The additional 8 specifies that the window should have one of each of the following regions: grow, goAway, and zoom. */ /* these will be equalized by the WDEF */ InsetRect(&windRect, -20, -40); OffsetRect(&windRect, 130, 55); NewWindow(NULL, &windRect, “\pAnother Diamond Window”, VISIBLE, NO_GROW_DIAMOND_PROC, PLACE_IN_FRONT, GO_AWAY_BOX, NULL_REF_NUM); openWindows = 2; do { WaitNextEvent(everyEvent, &theEvent, 0L, 0L); theWindow = (WindowPtr) theEvent.message; if (theWindow != NULL) SetPort(theWindow); switch(theEvent.what) { case mouseDown: thePart = FindWindow(theEvent.where, &theWindow); if (DoMouseDown(thePart, theWindow)) { openWindows --; if (openWindows == 1) { theWindow = FrontWindow(); SetDiamondWTitle(theWindow, newTitle); /* Demostration of SetOrigin() */ SetPort(theWindow); SetOrigin(-30, -50); windRect = theWindow->portRect; /* Must also offset the clipRgn so that it corresponds with the new window coordinates. */ if ( (**((DataRecordHdl) ((WindowPeek) theWindow)->dataHandle)).resizable) OffsetRgn(theWindow->clipRgn, -30, -50); else InsetRect(&windRect, -26, -26); EraseRect(&windRect); InvalRect(&windRect); } } break; case activateEvt: case updateEvt: GetPort(&oldPort); SetPort(theWindow); DrawGrowIcon(theWindow); BeginUpdate(theWindow); UpdateDiamond((WindowPeek) theWindow); EndUpdate(theWindow); SetPort(oldPort); break; } } while (openWindows > 0); } void main() { /* Initializes the ToolBox and calls the window handling function. */ PtrreservedMem; Rect screenRect; short index; MaxApplZone(); InitGraf(&thePort); InitFonts(); InitWindows(); TEInit(); InitDialogs(NULL); InitMenus(); FlushEvents(everyEvent, FLUSH_EVENTS); InitCursor(); DiamondWindowTest(); ExitToShell(); }
- SPREAD THE WORD:
- Slashdot
- Digg
- Del.icio.us
- Newsvine