Print Hints: QuickDraw GX Breaks the Space Hack
Dave Polaschek
Before QuickDraw GX, when an application that generated its own PostScript(TM) code wanted to make sure the printer could print a particular font, it could send one space character in the needed font. The LaserWriter driver would check the printer to see if the font was available, and if not, the driver would send the font to the printer so that it would be available to print the space character -- and any other characters in that font that the application-generated PostScript code might require. The reason for using a space was simple: you didn't want to mark the page just to get a font to the printer, and a space wouldn't mark it. This technique, first described in "The Perils of PostScript" back in develop Issue 1, became known as the "space hack."
Unfortunately, the space hack doesn't work with QuickDraw GX. This column describes a new way for applications that generate their own PostScript code to send fonts to the printer. The code to do this is provided on this issue's CD.
QUICKDRAW GX CHANGES THE PICTURE
QuickDraw GX has a really cool imaging model, supports all kinds of whizzy features, and to top it off, introduces the long-awaited new printing architecture. But it has one snag: after all the years you've spent getting your PostScript printing tuned just the way you like it, QuickDraw GX breaks the space hack.The space hack depends on a font's entire character set being sent to the printer in response to the need for a single character (the space character). But QuickDraw GX sends only the needed characters in a font to a printer, because it's trying to conserve memory on the printer and also because sending less data means faster transmission of that data. This isn't such a big issue with Roman fonts, where there are only 256 characters at most, but in the case of two-byte fonts such as Chinese, Japanese, and Korean fonts, where there can be tens of thousands of characters and the font can be tens of megabytes in size, sending only the required characters makes a big difference in speed.
Incidentally, with QuickDraw GX you don't need a specialized printer to print two-byte fonts. It divides fonts with more than 256 characters into several smaller fonts with new encodings containing just the characters you need, so you can print characters from the font on any PostScript printer.
THE NEW WAY TO DOWNLOAD FONTS
So QuickDraw GX has lots of advantages over QuickDraw, but the space hack is broken. What's the poor programmer to do?You can use a new font downloading method based on calling GXFlattenFont, a handy function introduced with QuickDraw GX, to convert the font to a form that's easily sent to the printer. GXFlattenFont is intended to convert any font present on your Macintosh into the output font format of your choice. (Conversion is limited by the capabilities of the scalers present, as explained in "QuickDraw GX Font Scalers.")
- the bitmap scaler, which is essentially the same as in QuickDraw
- the TrueType GX scaler, which supports the TrueType GX format
- the Type 1 scaler, which is part of Adobe(TM) Type Manager
QUICKDRAW GX FONT SCALERS
The QuickDraw GX Open Font Architecture accepts drop-in font scalers. A font scaler is a bit of code that takes a font of a given type and converts it to bitmaps for display. It also converts fonts to outline format and can optionally convert a font to another font format. QuickDraw GX includes three default scalers:
Now let's turn to the code that replaces the old space hack. The rough idea is to call GXFlattenFont on a QuickDraw font reference and a set of characters (an encoding) that you need to print, and return the result in a form that's easy to send to the printer. For simplicity, if no encoding is present, we use the standard Macintosh encoding. Listing 1 shows a font-downloading routine, FontToPict, that uses this technique if QuickDraw GX is installed. (This is a somewhat simplified version; see the CD for the full code of FontToPict and its related utility functions.)
Listing 1. FontToPict
PicHandle FontToPict(short qdFont, short qdStyle) { Rect theRect = {0, 0, 1, 1}; PicHandle thePict = OpenPicture(&theRect); const short kPostScriptHandle = 192; // If QuickDraw GX is installed, use the new method. if (GXInstalled()) { Handle piccommentHdl; unsigned short *myEncoding = nil; MakePSHandle(qdFont, qdStyle, myEncoding, &piccommentHdl); PicComment(kPostScriptHandle, GetHandleSize(piccommentHdl), piccommentHdl); } else { // If QuickDraw GX isn't installed, use the old method. Point penPoint; // We would normally set the clip here, but since we're just // drawing a space there's no need. GetPen(&penPoint); // Save the pen location. TextFont(qdFont); TextFace(qdStyle); DrawChar(' '); MoveTo(penPoint.h, penPoint.v); // Restore the pen location. } ClosePicture(); return (thePict); )FontToPict starts by checking to see if QuickDraw GX is installed. If not, it uses the old hack of printing a space; otherwise, it calls MakePSHandle (Listing 2), which calls the utility function ConvertQDFontToGXFont to convert the QuickDraw font reference into a QuickDraw GX font reference. MakePSHandle then checks to see if an encoding has been passed in; if not, it builds the standard Macintosh encoding. Next it calls FontToHandle, which is just a wrapper for GXFlattenFont. GXFlattenFont converts the specified font to the Type 1 format. Error-handling and cleanup code is last. Simplicity itself! The result, whether QuickDraw GX is present or not, is a PICT that you can send to the printer by calling DrawPicture once the printer port has been opened.
When calling MakePSHandle, you should specify an encoding array that contains the characters you intend to actually print. This prevents QuickDraw GX from sending the entire font to the printer and becomes very important when you make your application WorldScript aware. There's an #ifdef in the code on the CD that generates only the encoding array you need in order to use a portion of the font. As mentioned earlier, with Chinese, Japanese, and Korean fonts, sending only the characters you need can make the difference between sending a few kilobytes or many megabytes of data to the printer. If you don't use the entire font, remember to encode the characters that you want to draw, using the same encoding that you passed in to the MakePSHandle function.
Listing 2. MakePSHandle
OSErr MakePSHandle(short qdFont, char qdStyle, unsigned short *encodingArray, Handle *outputHandle) { OSErr status = noErr; gxFont theFont; unsigned short *myEncoding; Boolean madeEncoding = false; // Convert to a QuickDraw GX font reference. theFont = ConvertQDFontToGXFont(qdFont, qdStyle); // If no encoding, create the standard Macintosh encoding. if (!encodingArray) { long returnLength; myEncoding = (unsigned short *)NewPtrClear(256 * sizeof(short)); returnLength = MakeMac8BitEncoding(theFont, myEncoding); if (returnLength != 256) { DebugStr("\pHmm. We didn't get a full encoding."); return (returnLength); // Pass the error along. } madeEncoding = true; } else { myEncoding = encodingArray; } *outputHandle = FontToHandle(theFont, myEncoding); if (madeEncoding) DisposePtr((Ptr)myEncoding); status = MemError(); if (status == noErr) { status = GXGetGraphicsError(nil); if (status != noErr) { DisposeHandle(*outputHandle); *outputHandle = nil; } } return (status); }You may want to have HandleSpoolProc (which is called by GXFlattenFont and included on the CD) spool directly to the printer via picture comments. This way you won't need memory available to hold the font data at the intermediate steps.
DOWNLOADING HAPPINESS
The new font downloading method takes a little more work but produces better results in your printer font handling. You can easily send needed fonts to the printer, either the whole font or only the characters you'll be using. As a side benefit, you get support for two-byte font systems without having to write custom code for handling the large fonts or, worse yet, having to depend on the fonts being installed on the printer in a specific manner. Even if you're not ready to add QuickDraw GX imaging to your application today, adding QuickDraw GX compatibility improves the printing experience for your customers.
DAVE POLASCHEK recently relocated to California to join Apple's Developer Technical Support group. He's been told that supporting printing leads to hair loss and insanity. Dave previously lived in beautiful sunny Minnesota, and wonders if he'll get used to the harsh San Francisco Bay Area winters before he's bald and crazy, or if it's already too late.*
Thanks to Dan Lipton for providing the idea and core code illustrating the new font downloading method, and to Pete "Luke" Alexander, Dave Hersey, and Dan Lipton for reviewing this column.*
- SPREAD THE WORD:
- Slashdot
- Digg
- Del.icio.us
- Newsvine