Home Robot Controls Motor Controls Legacy Forum Contact

Note: Effective immediately, the products on this website have been rolled into the VEX product line (see VEXpro) and will only be available for sale at vexrobotics.com. Please click over to the VEX site to make your purchases. The relevant reference material on this site will be migrated over to the VEX Wiki over the next few weeks.

Victor 883 Speed Controller

View Shopping Cart

Over 19,138 Sold! The 24V Victor 883 is a speed controller specifically engineered for robotic applications. The high current capacity, low voltage drop, and peak surge capacity make the 24V Victor 883 ideal for drive systems while its braking options and precise control meet the demanding needs of arms and lift systems. The Victor 883 has output control from 10% to 100%. The speed controller can be directly driven from any IFI RC unit; the Mini RC, the Isaac16 Robot Controller, or the FRC Robot Controller. We recommend using a PWM Signal Driver if you are not using an IFI RC unit.

60A Continuous
Only weighs 4 oz.
Ideal for High Current Drive Motors
Safely handles high continuous current draws and extreme current surges.
Integral cooling fan ensures cool FET junction temperatures.
The low voltage drop ensures the motor receives maximum power.

P/N VICTOR-883-24-12
(with a 12V Fan)

$149.95

Specifications
Notes
Frequently Asked Questions (FAQ)

Users Guide
Installation Info

P/N VICTOR-883-24-24
(with a 24V Fan)

$149.95

Online Ordering - Same Day Shipping by 3:00pm CST (Mon-Fri)

Part Number	Description	In Stock	Price	Online Purchase
VICTOR-883-24-12	24V Victor 883 with 12V fan.		$149.95
VICTOR-883-24-24	24V Victor 883 with 24V fan.		$149.95
Additional Related Items
JUMPER-2PIN-PACK-20	2-Pin Jumper, (20-pack)		$1.95	Discontinued
FAN-VICTOR	Additional Fan for Victor Speed Controller Works with Victor, Thor, Speed/Spin Control, Durable Rotron Brand.		$8.95
CABLE-PWM-4PK	PWM Extension Cable (4 PACK) Large gauge wires. For Speed Controllers, Spikes, RCs and SSRs.		$19.95
PWM-DRIVER	PWM Signal Driver Ensure the signal from your receiver/Robot Controller is Speed Controller compatible. Note: +5V must be supplied on the center female socket (red wire) - power from your source. Not Needed with IFI Robot Controllers.		$14.95

Specifications

Control Signal	Standard R/C Type PWM (Pulse Width Modulation)
Operating Voltage	6V to 30V (does not include the fan)
Fan Type	Rotron. Battle proven by Inertia Labs (and many others).
12V Fan Voltage	6V to 16V
24V Fan Voltage	16V to 30V
Maximum Current	60A continuous
Surge Current	100A for < 2 second 200A for < 1 second
Power Connector	6-32 Screw Terminals
Signal Connector	Use a standard non-shrouded PWM cable (3 wires)
Typical Application	Power one motor with variable speed forward, reverse, or off
Weight	0.25 lbs

Notes

General Notes:

The red wire (center pin) on the PWM cable connected to the Victor is an open circuit. There is no reason to disconnect this wire in the cable. The Victor does not source or draw power on this line.
Do not reverse the input polarity on a Victor. Doing this will permanently damage the unit and void the warranty.

Signal Driver Notes:

Use a PWM Signal Driver to ensure the signal from your receiver is Victor compatible.
A PWM Signal Driver is not needed with IFI Control Systems, some receivers, and some mixers.

Fan Notes:

The Victor 883 comes with a 24 V or 12V cooling fan attached to the top of the unit.
The Victor 883 operates over a 6V-30V range, however, the fan's voltage range is smaller; 16-30 Volts.
You can purchase a optional fan, and then replace the fan supplied with the Victor 883.

IFIRobotics 1519 Interstate 30 West Greenville, TX 75402 Info@IFIRobotics.com 903.453.0802

"Innovation First" and "IFIRobotics.com" are marks of Innovation First, Inc. All other product names/marks of others are the property of their respective owners.
Copyright © 2002-2009, Innovation First, Inc. All Rights Reserved. Site Map