I got Executor DOS ,its version is 1.1 . (May 1993 copied)
i would like to use full version of 1.2 How should I do?
Or, Should I wait for Executor/PC?
Tats. Miyoshi
e-mail address;
old NEW
x8289070@jpnsut30.bitnet z8294643@jpnsut30.bitnet
x8289070@c1.noda.sut.ac.jp (closed)
x8289070@cc.noda.sut.ac.jp (closed)
cv004@uxp.aist.go.jp
tmiyoshi@ccmail.nimc.go.jp
From executor-owner Tue Jun 14 07:39:21 1994
Received: (from daemon@localhost) by nacm.com (8.6.9/8.6.9) id HAA07692 for executor-outgoing; Tue, 14 Jun 1994 07:15:06 -0700
Received: from indy.net (indynet.indy.net [199.3.65.1]) by nacm.com (8.6.9/8.6.9) with SMTP id HAA07686 for <executor@nacm.com>; Tue, 14 Jun 1994 07:15:00 -0700
Received: by indy.net id AA12320
(5.65c/IDA-1.4.4 for executor@nacm.com); Tue, 14 Jun 1994 09:10:40 -0500
Date: Tue, 14 Jun 1994 09:10:40 -0500
From: "Preston J. Tuchman" <preston@indy.net>
Message-Id: <199406141410.AA12320@indy.net>
To: cv004@uxp.aist.go.jp, executor@nacm.com
Subject: Hi there...
Sender: Executor-Owner@nacm.com
Precedence: bulk
Good question. Go ahead and get 1.2 for now. They are still working on
2.0 and it won't be out for a while.
Preston
From executor-owner Thu Jun 16 01:39:51 1994
Received: (from daemon@localhost) by nacm.com (8.6.9/8.6.9) id BAA06709 for executor-outgoing; Thu, 16 Jun 1994 01:15:35 -0700
Received: from mimbres.cs.unm.edu (mimbres.cs.unm.edu [129.24.12.128]) by nacm.com (8.6.9/8.6.9) with SMTP id BAA06703 for <executor@nacm.com>; Thu, 16 Jun 1994 01:15:24 -0700
Received: from iclone.UUCP by mimbres.cs.unm.edu (5.65/033093) with UUCP
id <AA22984@mimbres.cs.unm.edu>; Thu, 16 Jun 94 01:46:11 -0600
Received: by iclone (NX5.67d/NX3.0M)
id AA05223; Wed, 15 Jun 94 22:05:42 -0600
Date: Wed, 15 Jun 94 22:05:42 -0600
From: "Clifford T. Matthews" <iclone!ctm@cs.unm.edu>
Message-Id: <9406160405.AA05223@iclone>
Received: by NeXT.Mailer (1.100)
Received: by NeXT Mailer (1.100)
To: executor@nacm.com.UUCP
Subject: New Experimental versions of Executor out there
Sender: Executor-Owner@NACM.COM
Precedence: bulk
Hi Folks,
ftp.cs.unm.edu contains
pub/ardi/Executor_DOS/exexp12c.zip
and
pub/ardi/Executor_NEXTSTEP/Executor_130e.tar
In addition to a variety of bugfixes, these versions of Executor have
had a bunch of the inner memory management code revamped so that when
you quit an application you go right back into the "pick an
executable" dialogue box. People have been asking for this feature
for years, and we're finally there. There's still a chance that some
little bugs will create situations where if you run program X, it
runs fine, but if you run program W and then program X, X has
trouble. Please let us know if you find such a problem.
This new feature will be used to put a tiny browser in Executor so
that you'll be able to manipulate files or launch apps like you can
do with Apple's Finder (although ours won't be quite so nice).
Color is "limping" "in the lab". We're still at least three weeks
away from making color available to test people, but I hope to have
the other 2.0 features added by then as well. I'm hoping that within
a week I'll have serial port support and a few more goodies, and if
you experiment, you'll probably notice that more apps are running
better than ever before.
--Cliff
From executor-owner Thu Jun 16 07:39:55 1994
Received: (from daemon@localhost) by nacm.com (8.6.9/8.6.9) id GAA10458 for executor-outgoing; Thu, 16 Jun 1994 06:44:16 -0700
Received: from indy.net (indynet.indy.net [199.3.65.1]) by nacm.com (8.6.9/8.6.9) with SMTP id GAA10452 for <executor@nacm.com>; Thu, 16 Jun 1994 06:44:11 -0700
Received: by indy.net id AA21975
(5.65c/IDA-1.4.4 for executor@nacm.com); Thu, 16 Jun 1994 08:40:00 -0500
Date: Thu, 16 Jun 1994 08:40:00 -0500
From: "Preston J. Tuchman" <preston@indy.net>
Message-Id: <199406161340.AA21975@indy.net>
To: executor@nacm.com, iclone!ctm@cs.unm.edu
Subject: Re: New Experimental versions of Executor out there
Sender: Executor-Owner@nacm.com
Precedence: bulk
Cliff....glad to hear that things are coming along.
Well...we got the MAC here at the house. I will try and copy a few programs
off of it and see if I can get them to turn.
Bye for now.
Preston
From executor-owner Fri Jun 17 19:03:49 1994
Received: (from daemon@localhost) by nacm.com (8.6.9/8.6.9) id SAA06166 for executor-outgoing; Fri, 17 Jun 1994 18:44:00 -0700
Received: from mimbres.cs.unm.edu (mimbres.cs.unm.edu [129.24.12.128]) by nacm.com (8.6.9/8.6.9) with SMTP id SAA06160 for <executor@nacm.com>; Fri, 17 Jun 1994 18:43:54 -0700
Received: from iclone.UUCP by mimbres.cs.unm.edu (5.65/033093) with UUCP
id <AA01691@mimbres.cs.unm.edu>; Fri, 17 Jun 94 19:43:29 -0600
Received: by iclone (NX5.67d/NX3.0M)
id AA02328; Fri, 17 Jun 94 19:35:31 -0600
Date: Fri, 17 Jun 94 19:35:31 -0600
From: "Clifford T. Matthews" <iclone!ctm@cs.unm.edu>
Message-Id: <9406180135.AA02328@iclone>
Received: by NeXT.Mailer (1.100)
Received: by NeXT Mailer (1.100)
To: executor@nacm.com.UUCP
Subject: Executor/DOS 1.2c wedges when running out of exsystem.hfv
Sender: Executor-Owner@NACM.COM
Precedence: bulk
Hi Folks,
If you try to run one of the utilities that is in the "exsystem.hfv"
(System) drive, you will see Executor hang. On the other hand, if
you run a program from somewhere else first, then quit and go back to
System and try again, it will work.
I didn't notice this bug when I released 1.2c, but it's noted now,
and although annoying, you can work around it as described above.
--Cliff
From executor-owner Tue Jun 21 12:55:00 1994
Received: (from daemon@localhost) by nacm.com (8.6.9/8.6.9) id MAA12716 for executor-outgoing; Tue, 21 Jun 1994 12:36:03 -0700
Received: from motgate.mot.com (motgate.mot.com [129.188.136.100]) by nacm.com (8.6.9/8.6.9) with SMTP id MAA12710 for <executor@nacm.com>; Tue, 21 Jun 1994 12:35:59 -0700
Received: from pobox.mot.com ([129.188.137.100]) by motgate.mot.com with SMTP (5.67b/IDA-1.4.4/MOT-3.1 for <executor@nacm.com>)
id AA03075; Tue, 21 Jun 1994 14:35:26 -0500
Received: from csgpobox.csg.mot.com by pobox.mot.com with SMTP (5.67b/IDA-1.4.4/MOT-3.1 for <executor@nacm.com>)
id AA13185; Tue, 21 Jun 1994 14:35:25 -0500
Received: from PACSG.csg.mot.com by csgpobox.csg.mot.com (5.61/1.34)
id AA00751; Tue, 21 Jun 94 14:33:54 -0500
Received: from lc16 (pacsg.csg.mot.com) by pacsg.csg.mot.com (5.0/SMI-SVR4)
id AA09142; Tue, 21 Jun 1994 14:39:06 +0600
Received: from lc28 by lc16 with SMTP
(5.65c/IDA1.4.4.1-Domain/OS) id AA03897; Tue, 21 Jun 1994 14:31:50 -0500
Received: by lc28
(5.65c/IDA1.4.4.1-Domain/OS) id AA04140; Tue, 21 Jun 1994 14:31:48 -0500
Message-Id: <199406211931.AA04140@lc28>
From: georgew@pacsg.csg.mot.com (George Wang )
Date: Tue, 21 Jun 94 14:31:46 CDT
Subject: List of programs that run under Executor 1.2?
To: executor@nacm.com
Content-Length: 355
Sender: Executor-Owner@nacm.com
Precedence: bulk
Hello all,
Does anyone out there have a compiled list of programs that
do/do not work under Executor 1.2? If not perhaps we could
pool together information and form some list for distribution?
I'm sure such a list would be helpful to other users and even
for Ardi since they could improve on compatibility in future
versions of Executor.
Thanks,
George
From executor-owner Tue Jun 21 14:55:01 1994
Received: (from daemon@localhost) by nacm.com (8.6.9/8.6.9) id OAA14432 for executor-outgoing; Tue, 21 Jun 1994 14:48:51 -0700
Received: from FCRFV2.NCIFCRF.GOV ([129.43.51.3]) by nacm.com (8.6.9/8.6.9) with SMTP id OAA14426 for <executor@nacm.com>; Tue, 21 Jun 1994 14:48:47 -0700
