home *** CD-ROM | disk | FTP | other *** search
/ The Hacker's Encyclopedia 1998 / hackers_encyclopedia.iso / phreak / sysinfo / fortell.txt < prev    next >
Encoding:
Text File  |  2003-06-11  |  3.2 KB  |  99 lines

  1.  
  2. Yes in our continueing effort to keep all of the Hackers in the area informed,
  3. I have again come through and published another directory.
  4.  
  5. -------------------
  6.  
  7. Fortell systems seems to be a system to monitor lines. They can only be used to
  8. monitor lines within their own NPA.
  9.  A Fortell system is at 716-955-7750. When you call, you will hear:
  10.  
  11. 'Hello. This is the Taradyne Fortell system. Please enter ID code'
  12.  
  13. The ID for this system is 722877*. After you type that in (DTMF) it will ask
  14. 'please enter line number' where you then type the PRE+SUFF of the number you
  15. wish to check within the NPA of the Fortell.
  16.   After you enter a number, it will repeat the number you entered. Now it will
  17. ask you to 'please enter mode'.
  18.  
  19. The modes are:
  20.  
  21. 1-Calling on other line
  22. 2-Calling on test line
  23. 3-Line test results
  24.  
  25. If you enter mode 1, you will have these commands available:
  26.  
  27. 1-Fault location
  28. 2-Other testing
  29. 7-Test ok, Monitor
  30. 8-Hang up
  31. 9-Enter next line number
  32.  
  33.  If you enter 7 here, it will repeat what you selected, and ask for an ID code
  34. which can be any 6 digit number followed by a *.
  35.  
  36.  Now it will dial and tell you:
  37.  'Subscriber busy-busy-monitor test in progress conversation on line-short on
  38. line'
  39.  
  40. 2-Monitor test
  41. 3-Overide and test
  42. 4-Wait for idle
  43.  
  44.  If you enter 2, (Monitor Test) it will tell you the busy status again.
  45.  
  46.  If you enter 3, it will override, or tell you 'Not available in this CO'.
  47.  
  48.  If you enter 4, (Wait for idle) it will wait until the line is idle.
  49.  
  50.  
  51. If you enter 1 (Fault Location) at the main list you will get these options:
  52.  
  53. 1-Open location
  54. 3-Short location
  55. 4-Cross location
  56. 5-Ground location
  57. 8-Hang up
  58.  
  59. If you enter 2 (Other testing) here, you will have these commands:
  60.  
  61. 2-Loop Ground OHMS
  62. 3-Dial tone test
  63. 5-Pair ID
  64. 8-Hang up
  65.  
  66. If you enter Mode 2, you will have these options:(Other testing)
  67.  
  68. 2-Other testing
  69. 7-Test ok, Monitor
  70. 8-Hang up
  71. 9-Enter next line number
  72.  
  73.   It will repeat what you selected. If you select 2 here, you will now have
  74. these commands:
  75.  
  76. 2-Loop Ground Omhs
  77. 8-Hang up
  78.  
  79.  If you select 7 at the main list after mode 2, it will ask for an ID which is
  80. any 6 digit number followed by a *. Now it will dial and check the number. If
  81. the number is busy, it will say 'Subcriber busy-monitor-test in progress-
  82. conversation on line-short on line-please hang up-waiting for idle' Now you can
  83. just type * to go back to the main list of commands.
  84.  
  85.       If you enter MODE 3, if you have done a test before, it will give you the
  86. results of the test. If you haven't done a test, it will tell you so with 'No
  87. test results available'
  88.  
  89.  You can abort back to the main commands list by typing a *.
  90.  
  91.  By typing a 9 at several places you will be taken back to the beginning where
  92. it asks you to 'enter line number'
  93.  
  94. ==============================================================================
  95. [                         Infinity-Cartel Network                            ]
  96. [ The Cartel Adventure/AE/Hack BBS 5.5 meg --- 206-825-6236, or 206-939-6162 ]
  97. [ Infinity's Edge Adventure/AE/Cat/Hack 10 meg BBS ------------ 805-683-2725 ]
  98. ==============================================================================
  99.