home *** CD-ROM | disk | FTP | other *** search
- Sound Blaster Box
-
- This file will explain how to make an Sound Blaster Box. I once read
- a file about a neon box, where you cut up your headphones so that you
- can record your phone conversations easily. Well I thought that his method
- SUCKED! So, I decided to explain to you, and the gut that wrote it, how to
- make a better one. It's extremely better and has a lot more uses.
-
- You will need:
- 1- Phone (preferably one that you don't care about messin' up)
- 1- Broken Walkman (with 2 Headphone Jacks!) or 2 headphone jacks seperate
- 1- microphone (one that will fit the headphone jacks)
- 1- speaker or headphones
- 1- screwdriver
- 1- soldering iron
- 2- peices of wire just longer than the distance from the
- microphine on the phone to the speaker on the phone.
-
- How you WILL make it:
-
- 1. Unplug the phone from the wall. If you already have the headphone jacks,
- goto step 3.
- 2. Take your old walkman and and open it up, relativly gently. Then find your
- Headphone jacks (where you plug them in, DUH!) Next you will have to
- remove them. If they are on a ciruit board it is recomended to use a
- soldering iron to melt the solder and then remove it with out breaking it.
- If they are connected with wire, then cut the wire as far down as possible,
- leaving as much wire hanging off the jacks as you can.
- 3. Open your phone and find the microphone. Cut the mircophone off, leaving
- equal amounts of wire on boththe circuit board and the mike. Then take
- the two wires you already have and connect one wire to each wire coming
- from the circuit board of the phone, where the mike WAS connected
- (this will essentailly extending the wires, so that they reach the top
- of the phone)
- 4. Take the extended wires and connect ond headphone jack to it.You may want
- to solder this connection. You now have a microphone plug. This is very
- cool for connecting your sound board to the phone. (Explained Later)
- 5. Next cut the speaker off the phone. Leaving equal amounts of wire on each
- end. Then connect the second headphone jack to these wires. You now have a
- speaker jack.
- 6. Drill two holes in the side of the phone and place each jack so that the
- holes are accessibly from the outside (make sure that you can plug in the
- headphones after placing the jacks, you may need to make the holes larger
- if your headphones have a larger head.) Then superglue the jacks in place,
- that way when you close the phone, they don't fall away from the drilled
- holes.
- 7. Close the phone and plug it back in to the wall.
-
- Usage.
- As mentioned earlier, the headphone jacks are helpfull in pluging in your
- sound board, but there are many other uses.
-
- Uses for the Speaker Jack:
- 1. Tape phone conversations, by pluging the speaker jack of the phone into
- the microphone jack of your stereo, or microcassete recorder.
- 2. Tape tones from your phone onto a microcassete recorder, so that you can
- play them back on other phones. (like a portable dialer.)
- 3. You can plug it in to your speakers and make a speakerphone, or plug in
- your headphones so that you don't need to hold the phone to your ear to
- listen (You can make a headset with a microphone for complete hands-free
- conversations.)
-
- Uses for the Microphone Jack.
- 1. You can play your sound board files over the phone. (good for crank calls
- and other such things.) Very useful if you have a large selection of .VOC's
- or .WAV's! Simply unplug your speakers and connect the speaker jack of the
- sound board to the microphone jack of the phone.
- 2. You can play you walkman over the phone. (Crank Calls)
- 3. You can play anything with the capability to plug headphones into it over
- the phone! (TV's, radios, guitar amps, CD players)
- 4. You can build a headset phone as mentioned above, by taking your handy
- pair of headphones, and taping a microphone to the front with a piece of
- a broken hanger, or something.
- 5. You can secretly listen inon you parents conversations, because there is
- no microphone, ther is no sound when you pick up the phone!
- 6. You can blast the person on the other side of the phone by running your
- mike through an amp and then pluging it in to the micrphone jack. (Very
- Cool for Crank Calls!, frieks the person out!)
-
- ┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼
-
- All info provided for information purposes only, however, there is nothing
- illegal about pluging your sound blaster or stereo into your phone!
-
- ┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼┼
-
- Writen by: ┼ShadowHawk┼
- Date: 3-31-94
-
- If you have any questions or comments leave me E-mail at:
- UnderGround Outpost 1-215-493-7703
- The Asylum ][ 1-215-493-0934
-