home *** CD-ROM | disk | FTP | other *** search
- HOW TO PICK MASTER LOCKS
-
- Have you ever tried to impress your friends by picking one of those Master
-
- combination locks and failed? Well then read on. The Master lock company has
-
- made this kind of lock with a protection scheme. If you pull the handle of it
-
- hard, the knob won't turn. That was their biggest mistake...... Ok, now on to
-
- it.
-
-
-
- 1st number. Get out any of the Master locks so you know what's going on.
-
- 1: The handle part (the part that springs open when you get
- the combination),
-
- pull on it, but not enough so that the knob won't move. 2: While pulling on it
-
- turn the knob to the left until it won't move any more. Then add 5 to this
-
- number. Congradulations, you now have the 1st number.
-
-
-
- 2nd number. (a lot tougher) Ok, spin the dial around a couple of times,
-
- then go to the 1st number you got, then turn it to the right, bypassing the 1st
-
- number once. WHEN you have bypassed. Start pulling the handle and turning it.
-
- It will eventually fall into the groove and
- lock. While in the groove pull on
-
- it and turn the knob. If it is loose go to the next groove; if it's stiff you
-
- got the second number.
-
-
-
- 3rd number: After getting the 2nd, spin the dial, then enter the 2 numbers,
-
- then after the 2nd, go to the right and at all the numbers pull on it. The lock
-
- will eventually open if you did it right. If can't do it the first time, be
-
- patient, it takes time.