home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.wwiv.com
/
ftp.wwiv.com.zip
/
ftp.wwiv.com
/
pub
/
HATCH
/
PROTS424.ZIP
/
PROTS424.TXT
< prev
next >
Wrap
Text File
|
1996-04-20
|
13KB
|
347 lines
The Animal #1 @3094 1[∙4HerpsNET NC1∙]0
Wed Apr 17 21:54:41 1996
RE: OS/2
BY: Fiend #1 @6552 7[1M 177]0
Protocols: Standard, Non-Standard, & Multi-Modem Command Line setups
For WWIV BBS's and Possibly other BBS Software.
Format:
Receive command line:
Send command line:
Receive batch command line:
Send batch command line:
Bi-directional transfer command line:
===========================================================================
These settings are for xxxxx company products using xxxxx & xxxxx files.
Use these to replace the Internal WWIV setup for Protocals in INIT for the
<7> External Protocals #2, #3, & #4.
============================================================================
Standard COM port setup imput lines as follows:
X-Modem
DSZ port %2 speed %1 est 0 %4 rx %3
DSZ port %2 speed %1 est 0 %4 sx %3
X-Modem/CRC
DSZ port %2 speed %1 est 0 %4 rc %3
DSZ port %2 speed %1 est 0 %4 sx %3
Xmodem 1-K
DSZ port %2 speed %1 estimate 0 %4 rx -k %3
DSZ port %2 speed %1 estimate 0 %4 sx -k %3
Xmodem 1K-G
DSZ port %2 speed %1 estimate 0 %4 rx -kg %3
DSZ port %2 speed %1 estimate 0 %4 sx -kg %3
Y-modem
DSZ port %2 speed %1 est 0 %4 rb %3
DSZ port %2 speed %1 est 0 %4 sb %3
DSZ port %2 speed %1 est 0 %4 restrict rb %3
DSZ port %2 speed %1 est 0 %4 sb @%3
============================================================================
For the rest of your Protocal setting you may want to add or try these
settings as well. Added Protocals & Information.
============================================================================
Ymodem-g
DSZ port %2 speed %1 estimate 0 %4 rb -g %3
DSZ port %2 speed %1 estimate 0 %4 sb %3
DSZ port %2 speed %1 estimate 0 %4 restrict rb -g
DSZ port %2 speed %1 estimate 0 %4 sb @%3
Zmodem Compressed (text files)
DSZ port %2 speed %1 estimate 0 %4 rz -sZ %3
DSZ port %2 speed %1 estimate 0 %4 sz -srZ %3
Zmodem with moby turbo and crash recovery
DSZ port %2 speed %1 estimate 0 %4 rz -mrr %3
DSZ port %2 speed %1 estimate 0 %4 sz %3
DSZ port %2 speed %1 estimate 0 %4 restrict rz
DSZ port %2 speed %1 estimate 0 %4 sz @%3
DSZ (-mrr for mobyturbo and crash recovery)
DSZ port %2 speed %1 estimate 0 %4 rz -mrr %3
DSZ port %2 speed %1 estimate 0 %4 sz -r %3
DSZ port %2 speed %1 estimate 0 %4 restrict rz -mrr
DSZ port %2 speed %1 estimate 0 %4 sz @%3
GSZ (-mrr for mobyturbo and crash recovery)
GSZ port %2 speed %1 estimate 0 %4 rz -mrr %3
GSZ port %2 speed %1 estimate 0 %4 sz -r %3
GSZ port %2 speed %1 estimate 0 %4 restrict rz -mrr %3
GSZ port %2 speed %1 estimate 0 %4 sz @%3
============================================================================
The above settings work GREAT for me with a Registered DSZ.EXE & DSZ.COM
============================================================================
The following settings are from a file that was given to me. I believe they
are the same ones in the WWIV SysOp DOC's, But I have not checked.
============================================================================
True Ymodem
dsz port %2 est 0 %4 ha on rb %3
dsz port %2 est 0 %4 ha on sb -k -s %3
dsz port %2 est 0 %4 ha on rb %5
dsz port %2 est 0 %4 ha on -sb -k @%3
Ymodem-G (MNP/v.42)
dsz port %2 est 0 %4 ha on rb -g %3
dsz port %2 est 0 %4 ha on sb -s %3
dsz port %2 est 0 %4 ha on rb -g %5
dsz port %2 est 0 %4 ha on sb @%3
Zmodem
dsz port %2 est 0 %4 ha on rz %3
dsz port %2 est 0 %4 ha on sz -s %3
dsz port %2 est 0 %4 ha on rz %5
dsz port %2 est 0 %4 ha on sz -s @%3
============================================================================
Comments on all above settings for use with DSZ.EXE/COM and/or GSZ.EXE/COM?
I have found that Running under DOS, Windows v3.11, and OS/2 Warp that I had
to change some of the ways they where entered to get any of them to work in
a NON-STANDARD SetUp or Multi-Modem setup to run with WWIV v4.23 & v4.24/a
============================================================================
1) All enteries for DSZ had to be in LOWER case letters ONLY! or it wouldn't
Work at all for me.
2) Single Modem on a NON-STANDARD COM port settings would ONLY work with
Lower case imput for DSZ and/or GSZ programs.
3) The following will be for NON-Standard set up of COM 3, DMA $3E8, IRQ 5.
of the Above Protocals.
============================================================================
X-Modem
dsz portx 3e8,5 speed %1 est 0 %4 rx %3
dsz portx 3e8,5 speed %1 est 0 %4 sx %3
X-Modem/CRC
dsz portx 3e8,5 speed %1 est 0 %4 rc %3
dsz portx 3e8,5 speed %1 est 0 %4 sx %3
Xmodem 1-K
dsz portx 3e8,5 speed %1 estimate 0 %4 rx -k %3
dsz portx 3e8,5 speed %1 estimate 0 %4 sx -k %3
Xmodem 1K-G
dsz portx 3e8,5 speed %1 estimate 0 %4 rx -kg %3
dsz portx 3e8,5 speed %1 estimate 0 %4 sx -kg %3
Y-modem
dsz portx 3e8,5 speed %1 est 0 %4 rb %3
dsz portx 3e8,5 speed %1 est 0 %4 sb %3
dsz portx 3e8,5 speed %1 est 0 %4 restrict rb %3
dsz portx 3e8,5 speed %1 est 0 %4 sb @%3
Ymodem-g
dsz portx 3e8,5 speed %1 estimate 0 %4 rb -g %3
dsz portx 3e8,5 speed %1 estimate 0 %4 sb %3
dsz portx 3e8,5 speed %1 estimate 0 %4 restrict rb -g
dsz portx 3e8,5 speed %1 estimate 0 %4 sb @%3
Zmodem Compressed (text files)
dsz portx 3e8,5 speed %1 estimate 0 %4 rz -sZ %3
dsz portx 3e8,5 speed %1 estimate 0 %4 sz -srZ %3
Zmodem with moby turbo and crash recovery
dsz portx 3e8,5 speed %1 estimate 0 %4 rz -mrr %3
dsz portx 3e8,5 speed %1 estimate 0 %4 sz %3
dsz portx 3e8,5 speed %1 estimate 0 %4 restrict rz
dsz portx 3e8,5 speed %1 estimate 0 %4 sz @%3
DSZ (-mrr for mobyturbo and crash recovery)
dsz portx 3e8,5 speed %1 estimate 0 %4 rz -mrr %3
dsz portx 3e8,5 speed %1 estimate 0 %4 sz -r %3
dsz portx 3e8,5 speed %1 estimate 0 %4 restrict rz -mrr
dsz portx 3e8,5 speed %1 estimate 0 %4 sz @%3
GSZ (-mrr for mobyturbo and crash recovery)
gsz portx 3e8,5 speed %1 estimate 0 %4 rz -mrr %3
gsz portx 3e8,5 speed %1 estimate 0 %4 sz -r %3
gsz portx 3e8,5 speed %1 estimate 0 %4 restrict rz -mrr %3
gsz portx 3e8,5 speed %1 estimate 0 %4 sz @%3
============================================================================
Next on the list: Multi-Line/Node Configurations for DSZ.EXE/COM & GSZ.EXE
I found a Post by: Razorblade #1 @12195.WWIVnet (?) about an E-Mail recieved
from " Random #1@1.WWIVnet (aka Wayne Bell) with the following information.
I have setup ALL my nodes with this same lines for all of the DSZ & GSZ
related Protocals. Standard & Non-Standard Modems COM, DMA, & IRQ's. They
Work GREAT! Here they are as Posted on " WWIVnet National SysOp's Sub."
============================================================================
X-Modem
dsz portx %B,%I speed %1 est 0 %4 rx %3
dsz portx %B,%I speed %1 est 0 %4 sx %3
X-Modem/CRC
dsz portx %B,%I speed %1 est 0 %4 rc %3
dsz portx %B,%I speed %1 est 0 %4 sx %3
Xmodem 1-K
dsz portx %B,%I speed %1 estimate 0 %4 rx -k %3
dsz portx %B,%I speed %1 estimate 0 %4 sx -k %3
Xmodem 1K-G
dsz portx %B,%I speed %1 estimate 0 %4 rx -kg %3
dsz portx %B,%I speed %1 estimate 0 %4 sx -kg %3
Y-modem
dsz portx %B,%I speed %1 est 0 %4 rb %3
dsz portx %B,%I speed %1 est 0 %4 sb %3
dsz portx %B,%I speed %1 est 0 %4 restrict rb %3
dsz portx %B,%I speed %1 est 0 %4 sb @%3
Ymodem-g
dsz portx %B,%I speed %1 estimate 0 %4 rb -g %3
dsz portx %B,%I speed %1 estimate 0 %4 sb %3
dsz portx %B,%I speed %1 estimate 0 %4 restrict rb -g
dsz portx %B,%I speed %1 estimate 0 %4 sb @%3
Zmodem Compressed (text files)
dsz portx %B,%I speed %1 estimate 0 %4 rz -sZ %3
dsz portx %B,%I speed %1 estimate 0 %4 sz -srZ %3
Zmodem with moby turbo and crash recovery
dsz portx %B,%I speed %1 estimate 0 %4 rz -mrr %3
dsz portx %B,%I speed %1 estimate 0 %4 sz %3
dsz portx %B,%I speed %1 estimate 0 %4 restrict rz
dsz portx %B,%I speed %1 estimate 0 %4 sz @%3
DSZ (-mrr for mobyturbo and crash recovery)
dsz portx %B,%I speed %1 estimate 0 %4 rz -mrr %3
dsz portx %B,%I speed %1 estimate 0 %4 sz -r %3
dsz portx %B,%I speed %1 estimate 0 %4 restrict rz -mrr
dsz portx %B,%I speed %1 estimate 0 %4 sz @%3
GSZ (-mrr for mobyturbo and crash recovery)
gsz portx %B,%I speed %1 estimate 0 %4 rz -mrr %3
gsz portx %B,%I speed %1 estimate 0 %4 sz -r %3
gsz portx %B,%I speed %1 estimate 0 %4 restrict rz -mrr %3
gsz portx %B,%I speed %1 estimate 0 %4 sz @%3
============================================================================
These NOW work great for my setup under OS/2 Warp in Full DOS windows for
Each Instance of the BBS. I use ONLY " DSZ.EXE & GSZ.EXE " in my BBS. They
may use a little more memory, but the Transfers for Networks and the Users
are More realiable. Less Loss of DATA in transmissions.
NOTE: Specifing the FULL path may or may not be Needed if YOU attrib +r ALL
of your files (*.EXE & *.COM) for security of the BBS. Try the above as well
as specifing the full path: _:\wwiv\dsz portx %B,%I speed %1 etc............
I have a 4-port card and have 3 USR 33.6 Couriers on them. ALL work great!
============================================================================
Other Protocals & Settings:
============================================================================
Super Zmodem
szmodem port %2 speed %1 /SZTurbo /HARD rz %3
szmodem port %2 speed %1 /SZTurbo /HARD sz %3
HyperProtocol
HYPERP PORT:%2 BAUD:%1 DISPLAY:OFF HANDSHAKE:RTS/CTS RECEIVE %3
HYPERP PORT:%2 BAUD:%1 DISPLAY:OFF HANDSHAKE:RTS/CTS SEND %3
Tmodem
TMODEM -B %4 -P %2 -U C:\WWIV\DLOADS\SYSOP -R %3
TMODEM -B %4 -P %2 -@ %3
TMODEM -B %4 -P %2 -U C:\WWIV\DLOADS\SYSOP -R %3
TMODEM -B %4 -P %2 -@ %3
Jmodem
JMODEM R1 %3
JMODEM S1 %3
Lynx
LYNX R /%2 /S /H %3
LYNX S /%2 /S /H /L %3
LYNX R /%2 /S /H %5
LYNX S /%2 /S /H /L @%3
SEAlink
clink /p%2 /b%1 r %3
clink /p%2 /b%1 t %3
MPt (New Puma)<?>
MPT P%2 R %3
MPT P%2 S %3
MPT P%2 R %5
MPT P%2 S @%3
PUMA
PUMA HS P%2 S%1 E%4 CDSDSZ.LOG R %3
PUMA HS P%2 S%1 E%4 CDSDSZ.LOG S %3
PUMA HS P%2 S%1 E%4 R C:\WWIV\DLOADS\SYSOP\
PUMA HS P%2 S%1 E%4 CDSDSZ.LOG S @%3
HS/Link (Settings possibly from the WWIV SysOps DOC's?)
HSLINK -P%2 -HS -U%3 -E%4
HSLINK -P%2 -HS -NU %3 -E%4
HSLINK -P%2 -HS -U%5 -E%4
HSLINK -P%2 -HS -NU -E%4 @%3
HSLINK -P%2 -HS -U%5 -E%4 @%3
----------------------------------------------------------------------------
Hs/Link
[NOTE: This *IS* the Best setup I have used for Multi-Node/Non-Standard].
HSLINK -@_:\WWIV\HSLEACH.CFG -p%2 -e%4 -u%3
HSLINK -@_:\WWIV\HSLEACH.CFG -p%2 -e%4 -nu %3
HSLINK -@_:\WWIV\HSLEACH.CFG -p%2 -e%4 -u%3
HSLINK -@_:\WWIV\HSLEACH.CFG -p%2 -e%4 -nu @%3
HSLINK -@_:\WWIV\HSLEACH.CFG -p%2 -e%4 -@ @%3
[NOTE: Supplement the " _ " With the Drive/Partition letter of your BBS]...
[" HSLINK -@C:\WWIV\* " as an Example ]....................................
----------------------------------------------------------------------------
HS/Link
[Multi-Node,NON-Standard COMs from Random's Post. I haven't tryed This One].
hslink ..........Was Not in Post.........
hslink ..........Was Not in Post.........
hslink -PB$%B -PI%I -I4 -e%4 -@
hslink -PB$%B -PI%I -I4 -e%4 -@ -nu @%3
hslink -PB$%B -PI%I -I4 -e%4 -@ @%3
----------------------------------------------------------------------------
IceZmodem
IZM port %2 speed %1 restrict rz %3
IZM port %2 speed %1 sz %3
IZM port %2 speed %1 restrict rz
IZM port %2 speed %1 sz @%3
----------------------------------------------------------------------------
NOTE: I read the DOC's for IceZmodem and it clearly states not to change
the above settings for WWIV using NON-Standard COM settings or does it
give a variable to use with it for all modem configureations. If any one
has any others that Work Please let me Know so I can add them to this List.
----------------------------------------------------------------------------
Zyrion
Zyrion R -P%2 -C%1 %3
Zyrion S -P%2 -C%1 %3
-----------------------------------------------------------------------------
If any One Else has any other settings for *ANY* of the above Protocals
or for any NOT listed above. *PLEASE* E-Mail them to me or POST them on the
Subs. I wish to add them to this List.
-----------------------------------------------------------------------------
CREDITS: ALL individuals that send E-Mail or Information will recieve credit
of anything I use here in This file:
Wayne Bell aka Random #1 @1.WWIVnet (No Date)
Razorblade #1 @12195.WWIVnet <?> (April.10,1996)
Budo #1 @3056.USLink (Dec.15,1994)
Comx Dir #1 @6034.WWIVnet (Dec.17,1994)
-----------------------------------------------------------------------------
2Last but NOT least... Make sure you are RUNNING 4SIO153.ZIP0 2as a com driver0
2With OS/2 Warp.... It makes a real difference....0
2─┬─0 4⌠0
2┼3░▒▓█ 4│HΣ Äñïmä│0 3▓▒░2┼0
2├───────────────────┤0
5 Bushidokai BBS0