The Animal #1 @3094 1[ù4HerpsNET NC1ù]0 Wed Apr 17 21:54:41 1996 RE: OS/2 BY: Fiend #1 @6552 7[1M 177]0 Protocols: Standard, Non-Standard, & Multi-Modem Command Line setups For WWIV BBS's and Possibly other BBS Software. Format: Receive command line: Send command line: Receive batch command line: Send batch command line: Bi-directional transfer command line: =========================================================================== These settings are for xxxxx company products using xxxxx & xxxxx files. Use these to replace the Internal WWIV setup for Protocals in INIT for the <7> External Protocals #2, #3, & #4. ============================================================================ Standard COM port setup imput lines as follows: X-Modem DSZ port %2 speed %1 est 0 %4 rx %3 DSZ port %2 speed %1 est 0 %4 sx %3 X-Modem/CRC DSZ port %2 speed %1 est 0 %4 rc %3 DSZ port %2 speed %1 est 0 %4 sx %3 Xmodem 1-K DSZ port %2 speed %1 estimate 0 %4 rx -k %3 DSZ port %2 speed %1 estimate 0 %4 sx -k %3 Xmodem 1K-G DSZ port %2 speed %1 estimate 0 %4 rx -kg %3 DSZ port %2 speed %1 estimate 0 %4 sx -kg %3 Y-modem DSZ port %2 speed %1 est 0 %4 rb %3 DSZ port %2 speed %1 est 0 %4 sb %3 DSZ port %2 speed %1 est 0 %4 restrict rb %3 DSZ port %2 speed %1 est 0 %4 sb @%3 ============================================================================ For the rest of your Protocal setting you may want to add or try these settings as well. Added Protocals & Information. ============================================================================ Ymodem-g DSZ port %2 speed %1 estimate 0 %4 rb -g %3 DSZ port %2 speed %1 estimate 0 %4 sb %3 DSZ port %2 speed %1 estimate 0 %4 restrict rb -g DSZ port %2 speed %1 estimate 0 %4 sb @%3 Zmodem Compressed (text files) DSZ port %2 speed %1 estimate 0 %4 rz -sZ %3 DSZ port %2 speed %1 estimate 0 %4 sz -srZ %3 Zmodem with moby turbo and crash recovery DSZ port %2 speed %1 estimate 0 %4 rz -mrr %3 DSZ port %2 speed %1 estimate 0 %4 sz %3 DSZ port %2 speed %1 estimate 0 %4 restrict rz DSZ port %2 speed %1 estimate 0 %4 sz @%3 DSZ (-mrr for mobyturbo and crash recovery) DSZ port %2 speed %1 estimate 0 %4 rz -mrr %3 DSZ port %2 speed %1 estimate 0 %4 sz -r %3 DSZ port %2 speed %1 estimate 0 %4 restrict rz -mrr DSZ port %2 speed %1 estimate 0 %4 sz @%3 GSZ (-mrr for mobyturbo and crash recovery) GSZ port %2 speed %1 estimate 0 %4 rz -mrr %3 GSZ port %2 speed %1 estimate 0 %4 sz -r %3 GSZ port %2 speed %1 estimate 0 %4 restrict rz -mrr %3 GSZ port %2 speed %1 estimate 0 %4 sz @%3 ============================================================================ The above settings work GREAT for me with a Registered DSZ.EXE & DSZ.COM ============================================================================ The following settings are from a file that was given to me. I believe they are the same ones in the WWIV SysOp DOC's, But I have not checked. ============================================================================ True Ymodem dsz port %2 est 0 %4 ha on rb %3 dsz port %2 est 0 %4 ha on sb -k -s %3 dsz port %2 est 0 %4 ha on rb %5 dsz port %2 est 0 %4 ha on -sb -k @%3 Ymodem-G (MNP/v.42) dsz port %2 est 0 %4 ha on rb -g %3 dsz port %2 est 0 %4 ha on sb -s %3 dsz port %2 est 0 %4 ha on rb -g %5 dsz port %2 est 0 %4 ha on sb @%3 Zmodem dsz port %2 est 0 %4 ha on rz %3 dsz port %2 est 0 %4 ha on sz -s %3 dsz port %2 est 0 %4 ha on rz %5 dsz port %2 est 0 %4 ha on sz -s @%3 ============================================================================ Comments on all above settings for use with DSZ.EXE/COM and/or GSZ.EXE/COM? I have found that Running under DOS, Windows v3.11, and OS/2 Warp that I had to change some of the ways they where entered to get any of them to work in a NON-STANDARD SetUp or Multi-Modem setup to run with WWIV v4.23 & v4.24/a ============================================================================ 1) All enteries for DSZ had to be in LOWER case letters ONLY! or it wouldn't Work at all for me. 2) Single Modem on a NON-STANDARD COM port settings would ONLY work with Lower case imput for DSZ and/or GSZ programs. 3) The following will be for NON-Standard set up of COM 3, DMA $3E8, IRQ 5. of the Above Protocals. ============================================================================ X-Modem dsz portx 3e8,5 speed %1 est 0 %4 rx %3 dsz portx 3e8,5 speed %1 est 0 %4 sx %3 X-Modem/CRC dsz portx 3e8,5 speed %1 est 0 %4 rc %3 dsz portx 3e8,5 speed %1 est 0 %4 sx %3 Xmodem 1-K dsz portx 3e8,5 speed %1 estimate 0 %4 rx -k %3 dsz portx 3e8,5 speed %1 estimate 0 %4 sx -k %3 Xmodem 1K-G dsz portx 3e8,5 speed %1 estimate 0 %4 rx -kg %3 dsz portx 3e8,5 speed %1 estimate 0 %4 sx -kg %3 Y-modem dsz portx 3e8,5 speed %1 est 0 %4 rb %3 dsz portx 3e8,5 speed %1 est 0 %4 sb %3 dsz portx 3e8,5 speed %1 est 0 %4 restrict rb %3 dsz portx 3e8,5 speed %1 est 0 %4 sb @%3 Ymodem-g dsz portx 3e8,5 speed %1 estimate 0 %4 rb -g %3 dsz portx 3e8,5 speed %1 estimate 0 %4 sb %3 dsz portx 3e8,5 speed %1 estimate 0 %4 restrict rb -g dsz portx 3e8,5 speed %1 estimate 0 %4 sb @%3 Zmodem Compressed (text files) dsz portx 3e8,5 speed %1 estimate 0 %4 rz -sZ %3 dsz portx 3e8,5 speed %1 estimate 0 %4 sz -srZ %3 Zmodem with moby turbo and crash recovery dsz portx 3e8,5 speed %1 estimate 0 %4 rz -mrr %3 dsz portx 3e8,5 speed %1 estimate 0 %4 sz %3 dsz portx 3e8,5 speed %1 estimate 0 %4 restrict rz dsz portx 3e8,5 speed %1 estimate 0 %4 sz @%3 DSZ (-mrr for mobyturbo and crash recovery) dsz portx 3e8,5 speed %1 estimate 0 %4 rz -mrr %3 dsz portx 3e8,5 speed %1 estimate 0 %4 sz -r %3 dsz portx 3e8,5 speed %1 estimate 0 %4 restrict rz -mrr dsz portx 3e8,5 speed %1 estimate 0 %4 sz @%3 GSZ (-mrr for mobyturbo and crash recovery) gsz portx 3e8,5 speed %1 estimate 0 %4 rz -mrr %3 gsz portx 3e8,5 speed %1 estimate 0 %4 sz -r %3 gsz portx 3e8,5 speed %1 estimate 0 %4 restrict rz -mrr %3 gsz portx 3e8,5 speed %1 estimate 0 %4 sz @%3 ============================================================================ Next on the list: Multi-Line/Node Configurations for DSZ.EXE/COM & GSZ.EXE I found a Post by: Razorblade #1 @12195.WWIVnet (?) about an E-Mail recieved from " Random #1@1.WWIVnet (aka Wayne Bell) with the following information. I have setup ALL my nodes with this same lines for all of the DSZ & GSZ related Protocals. Standard & Non-Standard Modems COM, DMA, & IRQ's. They Work GREAT! Here they are as Posted on " WWIVnet National SysOp's Sub." ============================================================================ X-Modem dsz portx %B,%I speed %1 est 0 %4 rx %3 dsz portx %B,%I speed %1 est 0 %4 sx %3 X-Modem/CRC dsz portx %B,%I speed %1 est 0 %4 rc %3 dsz portx %B,%I speed %1 est 0 %4 sx %3 Xmodem 1-K dsz portx %B,%I speed %1 estimate 0 %4 rx -k %3 dsz portx %B,%I speed %1 estimate 0 %4 sx -k %3 Xmodem 1K-G dsz portx %B,%I speed %1 estimate 0 %4 rx -kg %3 dsz portx %B,%I speed %1 estimate 0 %4 sx -kg %3 Y-modem dsz portx %B,%I speed %1 est 0 %4 rb %3 dsz portx %B,%I speed %1 est 0 %4 sb %3 dsz portx %B,%I speed %1 est 0 %4 restrict rb %3 dsz portx %B,%I speed %1 est 0 %4 sb @%3 Ymodem-g dsz portx %B,%I speed %1 estimate 0 %4 rb -g %3 dsz portx %B,%I speed %1 estimate 0 %4 sb %3 dsz portx %B,%I speed %1 estimate 0 %4 restrict rb -g dsz portx %B,%I speed %1 estimate 0 %4 sb @%3 Zmodem Compressed (text files) dsz portx %B,%I speed %1 estimate 0 %4 rz -sZ %3 dsz portx %B,%I speed %1 estimate 0 %4 sz -srZ %3 Zmodem with moby turbo and crash recovery dsz portx %B,%I speed %1 estimate 0 %4 rz -mrr %3 dsz portx %B,%I speed %1 estimate 0 %4 sz %3 dsz portx %B,%I speed %1 estimate 0 %4 restrict rz dsz portx %B,%I speed %1 estimate 0 %4 sz @%3 DSZ (-mrr for mobyturbo and crash recovery) dsz portx %B,%I speed %1 estimate 0 %4 rz -mrr %3 dsz portx %B,%I speed %1 estimate 0 %4 sz -r %3 dsz portx %B,%I speed %1 estimate 0 %4 restrict rz -mrr dsz portx %B,%I speed %1 estimate 0 %4 sz @%3 GSZ (-mrr for mobyturbo and crash recovery) gsz portx %B,%I speed %1 estimate 0 %4 rz -mrr %3 gsz portx %B,%I speed %1 estimate 0 %4 sz -r %3 gsz portx %B,%I speed %1 estimate 0 %4 restrict rz -mrr %3 gsz portx %B,%I speed %1 estimate 0 %4 sz @%3 ============================================================================ These NOW work great for my setup under OS/2 Warp in Full DOS windows for Each Instance of the BBS. I use ONLY " DSZ.EXE & GSZ.EXE " in my BBS. They may use a little more memory, but the Transfers for Networks and the Users are More realiable. Less Loss of DATA in transmissions. NOTE: Specifing the FULL path may or may not be Needed if YOU attrib +r ALL of your files (*.EXE & *.COM) for security of the BBS. Try the above as well as specifing the full path: _:\wwiv\dsz portx %B,%I speed %1 etc............ I have a 4-port card and have 3 USR 33.6 Couriers on them. ALL work great! ============================================================================ Other Protocals & Settings: ============================================================================ Super Zmodem szmodem port %2 speed %1 /SZTurbo /HARD rz %3 szmodem port %2 speed %1 /SZTurbo /HARD sz %3 HyperProtocol HYPERP PORT:%2 BAUD:%1 DISPLAY:OFF HANDSHAKE:RTS/CTS RECEIVE %3 HYPERP PORT:%2 BAUD:%1 DISPLAY:OFF HANDSHAKE:RTS/CTS SEND %3 Tmodem TMODEM -B %4 -P %2 -U C:\WWIV\DLOADS\SYSOP -R %3 TMODEM -B %4 -P %2 -@ %3 TMODEM -B %4 -P %2 -U C:\WWIV\DLOADS\SYSOP -R %3 TMODEM -B %4 -P %2 -@ %3 Jmodem JMODEM R1 %3 JMODEM S1 %3 Lynx LYNX R /%2 /S /H %3 LYNX S /%2 /S /H /L %3 LYNX R /%2 /S /H %5 LYNX S /%2 /S /H /L @%3 SEAlink clink /p%2 /b%1 r %3 clink /p%2 /b%1 t %3 MPt (New Puma) MPT P%2 R %3 MPT P%2 S %3 MPT P%2 R %5 MPT P%2 S @%3 PUMA PUMA HS P%2 S%1 E%4 CDSDSZ.LOG R %3 PUMA HS P%2 S%1 E%4 CDSDSZ.LOG S %3 PUMA HS P%2 S%1 E%4 R C:\WWIV\DLOADS\SYSOP\ PUMA HS P%2 S%1 E%4 CDSDSZ.LOG S @%3 HS/Link (Settings possibly from the WWIV SysOps DOC's?) HSLINK -P%2 -HS -U%3 -E%4 HSLINK -P%2 -HS -NU %3 -E%4 HSLINK -P%2 -HS -U%5 -E%4 HSLINK -P%2 -HS -NU -E%4 @%3 HSLINK -P%2 -HS -U%5 -E%4 @%3 ---------------------------------------------------------------------------- Hs/Link [NOTE: This *IS* the Best setup I have used for Multi-Node/Non-Standard]. HSLINK -@_:\WWIV\HSLEACH.CFG -p%2 -e%4 -u%3 HSLINK -@_:\WWIV\HSLEACH.CFG -p%2 -e%4 -nu %3 HSLINK -@_:\WWIV\HSLEACH.CFG -p%2 -e%4 -u%3 HSLINK -@_:\WWIV\HSLEACH.CFG -p%2 -e%4 -nu @%3 HSLINK -@_:\WWIV\HSLEACH.CFG -p%2 -e%4 -@ @%3 [NOTE: Supplement the " _ " With the Drive/Partition letter of your BBS]... [" HSLINK -@C:\WWIV\* " as an Example ].................................... ---------------------------------------------------------------------------- HS/Link [Multi-Node,NON-Standard COMs from Random's Post. I haven't tryed This One]. hslink ..........Was Not in Post......... hslink ..........Was Not in Post......... hslink -PB$%B -PI%I -I4 -e%4 -@ hslink -PB$%B -PI%I -I4 -e%4 -@ -nu @%3 hslink -PB$%B -PI%I -I4 -e%4 -@ @%3 ---------------------------------------------------------------------------- IceZmodem IZM port %2 speed %1 restrict rz %3 IZM port %2 speed %1 sz %3 IZM port %2 speed %1 restrict rz IZM port %2 speed %1 sz @%3 ---------------------------------------------------------------------------- NOTE: I read the DOC's for IceZmodem and it clearly states not to change the above settings for WWIV using NON-Standard COM settings or does it give a variable to use with it for all modem configureations. If any one has any others that Work Please let me Know so I can add them to this List. ---------------------------------------------------------------------------- Zyrion Zyrion R -P%2 -C%1 %3 Zyrion S -P%2 -C%1 %3 ----------------------------------------------------------------------------- If any One Else has any other settings for *ANY* of the above Protocals or for any NOT listed above. *PLEASE* E-Mail them to me or POST them on the Subs. I wish to add them to this List. ----------------------------------------------------------------------------- CREDITS: ALL individuals that send E-Mail or Information will recieve credit of anything I use here in This file: Wayne Bell aka Random #1 @1.WWIVnet (No Date) Razorblade #1 @12195.WWIVnet (April.10,1996) Budo #1 @3056.USLink (Dec.15,1994) Comx Dir #1 @6034.WWIVnet (Dec.17,1994) ----------------------------------------------------------------------------- 2Last but NOT least... Make sure you are RUNNING 4SIO153.ZIP0 2as a com driver0 2With OS/2 Warp.... It makes a real difference....0  2ÄÂÄ0 4ô0  2Å3°±²Û 4³Hä Ž¤‹m„³0 3²±°2Å0  2ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´0  5 Bushidokai BBS0