home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.wwiv.com
/
ftp.wwiv.com.zip
/
ftp.wwiv.com
/
pub
/
BBS
/
IMAJ601A.ZIP
/
IMAJICA.DOC
< prev
next >
Wrap
Text File
|
1994-05-10
|
131KB
|
3,894 lines
IMAJICA BBS SYSTEMS
COPYRIGHT 1994 BY TIDEPOOL SOFTWARE & GREG SILER
Imajica Bulletin Board System is a complete and intuitive telecommunication
package. Imajica offers features not often found in other BBS programs
such as a built-in QWK Mailer, Dual Conferencing, Ansi Conferencing, Call-
back verification, and much more.
1. System Initialization and WFCMenu 2
1. Intro and BBS Requirements 2
2. Common Abbreviations 3
3. Command Line Parameters 4
4. Installation 4
5. WFC Information 6
6. WFC Commands 6
2. Sysop Function Keys 8
3. ACS System 8
4. User Restrictions 10
5. MCI Codes 11
1. MCI Codes Defined 11
2. Specialized MCI Codes 11
1. Archive and Protocol Codes 11
2. Message Quoting Codes 12
3. Universal MCI Codes 12
6. System Configuration 13
1. System Configuration 13
2. BBS configuration and file paths 14
3. System Passwords 15
4. Modem Configuration 16
1. General Modem Settings 16
2. Result Codes: 18
5. System ACS Settings 18
6. Miscellaneous Settings 19
1. General Miscellaneous 20
2. Define AutoMail 20
7. System Variables 21
8. System Flagged Functions 22
9. File Section Configuration 25
10.Archive Configuration 26
11.Subscription & Access Levels 27
12.Network Configuration 28
13.Offline Mail Configuration 30
14.String Configuration 31
1. String configuration - page 1 of 6 31
2. String configuration - page 2 of 6 32
3. String configuration - page 3 of 6 32
4. String configuration - page 4 of 6 33
5. String configuration - page 5 of 6 33
6. String configuration - page 6 of 6 34
15.Conference Descriptions 34
16.Color Configuration 35
17.User Ratios/Limits 36
18.Update System Averages 37
19.Multinode Support 37
7. User Editor 37
8. Message Base Editor 39
9. File Base Editor 42
10.Protocol Editor 45
11.Menu Editor 47
1. Menu System Commands 47
1. Offline Mail 47
2. Sysop Commands (W) 48
3. Miscellaneous 50
4. Archive 51
5. Doors 52
6. Files 52
7. Hangup 54
8. Messages 54
9. Multi-Node 55
10.Other 55
11.Auto-Message 58
2. Modifying Menu Commands 61
12.Event Editor 62
13.Run-Time Errors 64
14.System Flags 65
1. User AC Restrictions 65
2. File Base Flags 66
3. Message Base Flags 66
1. Message Base Flags 66
2. Echomail Flags 67
4. Menu Flags 68
15.Optional Files 68
1. Optional File Extentions: 68
2. Optional File Listing 69
3. Specific Optional Files 70
16.CDRom 71
17.Ascii Chart 72
18.Credits 72
System Initialization and WFCMenu
Intro and BBS Requirements
Welcome to Imajica Bulletin Board Systems.
Imajica, which was created a year ago, is a direct descendant of
Telegard 2.5i source code. There have been quite a few
modifications to the original source including comm rewrites,
file sharing and time slicing routines, and I/O functions.
As best as I can figure, over 75% of the source has been modified
or totally rewritten. For a complete history of the changes, see
"HISTORY.DOC".
You must have at least a 286 processor or higher to operate
Imajica. 300k available memory and a fossil driver are also
required. Fossil drivers, such as BNU and X00, are available for
download from most any BBS system. Please read the documentation
provided with chosen software for usage.
This release (3-15 Beta) is NOT intended to be fully operational and
"bug-free". It is BETA test software, and all responsibilities
are forgiven to any users of such software.
Common Abbreviations
* There are some terms you might not be familiar with - I've
tried to remember as many as I could. Since this Documentation
file is being thrown together tonight, between the tired fingers
and the screen saves, they might not all be in here. I'll try to
add more to this area later.
WFCMenu - Waiting for call menu. The menu you are at when
boot up Imajica.
ACS - Security Access String. The "code" to get into
certain areas of the BBS.
DLS - Download Security Level. Usually the security
it takes to download from a certain file area.
SL - Security Level. The main security access used
on the board.
NODE - Which "channel" you are on. Not always the same
as the comport you are on.
QWK - The file extension of a message packet created
by Imajica for download and use on an off-line mail reader.
REP - The file extension of a message packet created
by an off-line mailer for upload to Imajica's message bases.
FORUM - A way for a sysop to section off different areas
of his/her board. Access is obtained, if available, by
changing conferences by user command or automatically by
menu command.
AR FLAGS - These are flags "A" - "Z". See section on ACS.
AF FLAGS - These are the forum flags "A" - "Z". See ACS.
AC FLAGS - These are restriction flags. See Restrictions.
MCI - These are codes that, when placed in text files
or string prompts, expand into assigned variables such as
the users name, time left, BBS name, etc. These codes are
always preceded by a "@" character.
Command Line Parameters
The command line parameters are as follows:
/? Brings up a command line help list.
/Bxxxxx This command tells Imajica to connect to the modem
at "xxxxx" baud. This is needed for use with front
end mailers such as Front Door and D'Bridge.
/EExxx Critical error to exit with (254 is default).
/ENxxx Normal error level to exit with (0 is default).
/L Operates the BBS in Local Mode. No modem I/O.
/Mx Creates QWK packet for user and exits.
/Nn Run Imajica on node "n". Default is 1.
/P Pack message bases only.
/Q Quit to DOS after next user logs off.
/Un Will upload REP packet for user "n" then exit to
DOS.
/Xnnnn External Event start time in "nnnn" minutes.
Installation
TO INSTALL:
YOU WILL NEED TO HAVE PKUNZIP.EXE IN YOUR PATH OR START DIRECTORY
FOR PROPER INSTALLATION. FAILURE TO DO SO WILL RESULT IN
THE NEED TO DELETE ALL FILES AND DIRECTORIES MADE, AND START
THE ENTIRE INSTALLATION OVER!
Create your main BBS directory. your path statement, i.e. AUTOEXEC.BAT.
This directory will hereafter be referred to as the "start directory".
Directory tree using "IMAGE" as the start directory:
\IMAGE
\MISC
\DATA
\LOGS
\MSGS
\ECHOMAIL
\NETMAIL
\TEMP
\NODE1
\LOG
\MSG
\QWK
\MENUS
DON'T PRE-CREATE THESE DIRECTORIES!
Copy all files from the distribution package into the start directory.
INCLUDED FILES: (size) (info)
IMAJICA.DOC 43776 The file you are reading.
IMAJICA.EXE 93766 Main executionable file.
IMAJICA.OVR 653536 Main overlay file.
IMAJICA.DA° 24419 Menu, graphic, misc. archive.
*SETUP.COM 1793 RUN THIS TO SETUP/INSTALL.
INSTALL.DA° 38992 Installation routines.
HISTORY.DOC 18299 Text of modifications/changes/fixes.
IMAJDATA.PAS 40372 Record structures in Pascal.
ECHODRIV.EXE 33847 Imports/exports echomail
WAITING.EXE 20832 Used to initialize IMAJICA.DAT
Change to the start directory and type "SETUP".
You will be prompted "Install Imajica Current Directory?:"
This by default will be the directory you are running SETUP.COM from.
By pressing [Y] on this [ENTER] on the next 2 prompts, you can select the
default. You will then be prompted for an archive path, a protocol
path, and a private file transfer path.
ARCHIVE PATH : This is the path where the external archiving
files will be kept and used. ARJ.EXE, PKUNZIP.EXE,
PKZIP.EXE, GIFFER.EXE, SCAN.EXE, etc...
PROTOCOL PATH : This is the path where the external protocol
files will be kept and used. DSZ.EXE, PUMA.EXE,
HSLINK.EXE, etc...
PRIVATE FILE PATH : This is the directory where all "private
file" transfers are stored.
The board will install and load up locally (no comport activity).
You should use the "S"ystem Configuration to configure your modem and
other information at this time.
To log on, press the space bar.
Later, you might want to add the following lines to your AUTOEXEC.BAT:
SET DSZ=C:\START_DIR\PROT\DSZ.EXE
SET DSZTEMP=C:\START_DIR\LOGS\DSZTEMP.LOG
At DOS, type IMAJICA /? for command line help.
A fossil driver, such as BNU.EXE or X00.EXE, needs to be installed before
loading Imajica unless in "/L"ocal mode.
WFC Information
TOADY'S STATS: This displays current daily information.
SYSTEM TOTALS: This displays accumulative data from the
start date to current date.
LAST CALLER: Displays systems last callers' name.
LAST ACTIVE: Displays the time since last local/remote activity.
COMM: Displays whether Fossil/Internal routines are used.
ERRORS: Displays same day accumulative error count.
MAIL: Displays sysop mail waiting.
HD SPACE: Displays Hard Drive space available to BBS.
USERS: Displays total user number.
SYSTEM ACTIVITY: Level graph of system usage.
WFC Commands
S - Enters System Configuration. Major BBS modifications
take place in here. Setting up security access, levels,
passwords, modem, and string defaults are accessed
within this sub-menu.
U - User Editor. Modify users information, delete,
validate, etc.
# - Menu Editor - Add, delete, modify menu's and menu items.
E - Event Editor - Add or modify sysop definable events
including Security windows, Message packing, IQNet
transfers, and external utilities.
V - Votes Editor - Currently disabled in this version.
F - File Base Configuration - Add, delete, modify file
bases.
B - Message (Board) Base Editor - Add, delete, modify
message bases.
X - Transfer Protocol Editor - Add, delete, modify
file transfer protocol settings.
T - Text Editor - Currently disabled in this version.
J - Forum (conference) Editor - Add/Change Forum
flags and descriptions.
C - Log of callers for today.
P - Pack message bases. This command will take all deleted
messages and remove them from the message data files.
M - Read everyones personal mail.
R - Read your personal mail.
W - Write personal mail.
I - Send initialization string to modem.
O - Take phone off hook.
A - Manually answer the incoming call.
H - Send hang-up string to modem.
N - Node information. See who's on-line and doing what.
! - Edit files in the file bases.
L - Shows Sysop Logs, ImajErr Logs, and ImajScr save files.
Z - Show a detailed history usage summary.
D - Shell to DOS.
Q - Quits to DOS with error level.
Sysop Function Keys
Depressing the ALT-T key anywhere on-line will get you a sysop
help window. The following commands are valid in this version:
F1 Edit Users Access with "waiting" prompt displayed.
F2 Enable Sysop Information lines.
F3 Toggle Remotes keys on/off.
F4 Disable users Page Attempt.
F5 Hang up on user.
F6 RESERVED FOR ALPHA TEST USE
F7 Subtract 5 minutes from users time.
F8 Add 5 minutes to users time.
F9 Temporary Sysop Access.
F10 Chat enable/disable.
SHIFT-F1 Edit Users Access w/o "waiting" displayed.
SHIFT-F2 Save Screen to "IMAJSAV.LOG".
SHIFT-F3 Toggle users screen/keys on/off.
SHIFT-F7 Subtract "x" number of minutes from users time.
SHIFT-F8 Add "x" number of minutes to users on-line time.
ALT-[1..5]Validate user online to subscription level (HARD)
CTRL-[1.5]Validate user online to subscription level (SOFT}
ALT-G Chat, Global logging options.
ALT-L Clear screen.
ALT-V Validate user on-line.
ALT-F3 Toggle local screen.
ALT-W Toggle Sysop Information lines.
ALT-J Shell to DOS.
ALT-F5 Hang up with options.
ALT-F9 Page user.
ALT-F10 Display "Chat Reason".
CTRL-F5 Hang-up with line noise.
ALT-T Help Screen.
ALT-= Quit after next user logs off.
CTRL-PRTSCR -Force exit error.
ACS System
The two main ACS codes are 's' and 'd'. A string of 's30' can be
accessed with a SL of 30 or more. A string of 'd30' can be accessed
with a DSL of 30 or more. More involved strings can have the following
options:
Function: Axxx
Description: users age
Requirements: User must be "xxx" years or older.
Function: Bxxxxx
Description: users baud
Requirements: User must be logged in at "xxxxx" baud or higher.
Function: dxxx
Description: users DLS
Requirements: User must have "xxx" DLS or higher.
Function: fx
Description: users AR flag
Requirements: User must have "x" AR flag.
Function: g(m/f)
Description: users sex
Requirements: User must be (m/f) to access.
Function: hxxx
Description: hour of day
Requirements: Must be "xxx" minutes after midnight.
Function: pxxxxx
Description: users file points
Requirements: User must have at least "xxxxx" file points.
Function: rx
Description: users AC flag
Requirements: User must have "x" AC flag.
Function: sxxx
Description: users SL flag
Requirements: User must have SL of "xxx" or higher.
Function: txxxx
Description: users time left in minutes
Requirements: User must have at least "xxxx" minutes left.
Function: uxxx
Description: users usernumber
Requirements: Must be user number "xxx".
Function: v
Description: validated user
Requirements: User must be validated.
Function: wx
Description: day of week
Requirements: Must be "x" day of week (0-6).
Function: xxxx
Description: subscription expiration
Requirements: "xxx" must be equal to or greater than
users total days left until subscription
expiration.
Operands such as "|" (OR), "!" (NOT), "^" (TRUE), "%" (FALSE), and
"&" (AND) can be used in conjunction with other security codes.
EXAMPLE: ACS : u1|s30&fZ
RESULTS: User #1 has access, or any user with a SL of 30 AND AR flag
has access.
EXAMPLE: ACS : s30b14400|u1
RESULTS: User #1 has access, or any user with a SL of 30 and
is logged in at 14400 bps or higher.
User Restrictions
Can logon ONLY once/day
* User cannot logon more than one time per day.
Can't page sysop
* User can't call sysop for chat.
Posts marked unvalidated
* Users messages are not seen until validated.
Back/down spacing restricted
* User cannot use arrow keys while posting a message.
Can't add to BBS list
* User cannot add to BBS listing.
(*) Can't post/send anon.
* User cannot post anonymous.
Can't post at all
* User cannot post at all.
Can't send email
* User cannot send private mail.
Can't vote
* User cannot vote.
Automatic mail deletion
* User must delete private mail when read.
Special access granted:
Send/receive FMail
* Allows user to send and receive private file transfers.
ANSI-Conferencing
* Allows user to change ANSI screens or select generic menus.
No UL/DL ratio check
* No ratio checks when uploading.
No post/call ratio check
* No post call checks.
No file points check
* No file point check.
Protection from deletion
* Cannot be deleted unless this flag is removed.
MCI Codes
MCI Codes Defined
MCI stands for Message Command Interpreter. These codes are letters
of the alphabet that are preceeded with an "@" symbol. MCI codes will
expand into individual system or user information strings when they
are displayed in various prompts, text files, and messages.
MCI codes in Imajica are virtually universal. They work in messages,
text files, prompts - everywhere! There are also many new MCI codes
on the way. MCI codes are CASE SENSITIVE!
Specialized MCI Codes
Archive and Protocol Codes
%A Archive Path
%B User Baud Rate reported
%C Main BBS Directory
%D IRQ string
%E Port Address string
%F File to be processed
%G Path to Data files
%I Internal files (filenames)
%L Log file (download list)
%N Node number
%P Comport number
%T Temporary Log
Message Quoting Codes
@S User being quoted
@R User receiving original quote
@D Original message date
@T Original message time
Universal MCI Codes
@A - User's Handle
@B - User's Real Name
@C - User's first name
@D - User's last name
@E - User's phone number
@F - User's street address
@G - User's City/State
@H - User's Zip Code
@I - User's Security Level
@J - User's Download Security Level
@K - User's last call date
@L - User's total number of calls
@M - Line Feed
@N - User's number of files downloaded
@O - User's number of files uploaded
@P - User's kbytes downloaded
@Q - User's kbytes uploaded
@R - User's number of posts
@S - User's number of downloads today
@T - User's kbytes of downloads today
@U - User's number of file points
@V - User's Time left
@W - Current Message base name
@X - Current Message base number
@Y - Current File base name
@Z - Current File base number
- Node Number
- Current Conference Tag
- Current Conference Name
- Free Kbytes in current file area
- Current Message Number
- Highest Message Number Available
- Maximum Lines available in a message
- Clear screen
- Delay
- Pause
@# - Spin Cursor
@! - Aborting off
@~ - System Caller Number
@& - Mr. or Ms. by gender
@a - Date
@b - Time
@c - BBS Name
@d - BBS Phone
@e - SysOp Name
@f - Post/Call Ratio
@h - Baud rate
@i - Time left in minutes
@j - Max. number of files download able in one day
@k - Max. number of kbytes " " " "
@l - Command Listing
@n - File conference tag
@o - File conference name
@p - Users 1st on date.
@q - Users formatted subscription expiration date.
@r - Users Kilobytes left for download
@s - Users Subscription Name
@t - Users Subscription Expiration Date (MM/DD/YY)
@u -
@v - QWK Message limit per package
@w - QWK Message limit per base
@x -
@y -
@z -
System Configuration
System Configuration
Modem Configuration H. Miscellaneous Configuration
File Paths and Configuration I. Network Configuration
System ACS Settings J. Conferencing/FMail Configuration
System Variables S. String Configuration
System Flagged Functions O. Off-line Mail Configuration
File Section Configuration Z. Default Colors
New User and Auto-Validation Settings *. Multinode Support
Time Limitations
Call Allowance/Day
UL/DL # Files Ratio
UL/DL K-Bytes Ratio
Post/Call Ratio
Max. downloads per day
Max. download kbytes per day
Update system averages
Enter selection (A-J,S,O,Z,1-8) [Q]uit : _
BBS configuration and file paths
BBS name & number :The Tidepool BBS (219-745-1368)
SysOp's name/alias :Tadpole
SysOp chat hours :*None* G. 2400 baud hours :Always allowed
Regular DL hours :Always allowed H. 2400 baud DL hours :Always allowed
Shuttle Logon is :In-active I. New users are :Accepted
!. Lockout 2400 baud :Nah J. Swap shell function:Active
BBS Passwords K. Pre-event warning :60 seconds
Data file directory :"C:\IMAGE\DATA\"
Graphics file dir. :"C:\IMAGE\MISC\"
Messages directory :"C:\IMAGE\MSGS\"
Menu file directory :"C:\IMAGE\MENUS\"
Text-file section dir. :"C:\IMAGE\TEXT\"
Log/Chat/Trap file dir. :"C:\IMAGE\LOGS\"
Temp file directory :"C:\IMAGE\TEMP\"
Archive directory :"C:\IMAGE\ARCS\"
Protocol directory :"C:\IMAGE\PROT\"
F-Mail directory :"C:\IMAGE\FMAIL\"
*. Last T-File edit date :01/07/94
Enter selection (A-K,?,!,0-9) [Q]uit : _
BBS name & number :The Other Board (219-744-5293)
* You're BBS name and number.
SysOp's name/alias :Greg Siler
* The name you wish to go by.
SysOp chat hours :*None*
* Hour, if any, that you will be AVAILABLE for chat.
baud hours :Always allowed
* Hours, if any, that 2400 baud and lower can log on.
Regular DL hours :Always allowed
* Hours, if any, that D/L'ing is accessible.
baud DL hours :Always allowed
* Hours, if any, that 2400 baud can access D/L'ing.
Shuttle Logon is :In-active
* Use the Shuttle Logon?
New users are :Accepted
* Whether you are accepting new users.
!. LOCKOUT 2400 BAUD :No
* Whether you are allowing 2400 baud and lower.
Swap shell function:Active
* Whether to swap out during a shell to DOS.
BBS Passwords
* Define user passwords (Explained below)
Pre-event warning :60 seconds
* Time before event to warn user.
Data file directory :"C:\IMAJICA\DATA\"
* Directory where Data files are stored.
Graphics file dir. :"C:\IMAJICA\MISC\"
* Directory where *.ANS,ASC,TXT files are stored.
Messages directory :"C:\IMAJICA\MSGS\"
* Directory where message files are stored.
Menu file directory :"C:\IMAJICA\MENUS\"
* Directory where Menu files are stored.
Text-file section dir. :"C:\IMAJICA\TEXT\"
* Directory where Text files are stored.
Log/Chat/Trap file dir. :"C:\IMAJICA\LOGS\"
* Directory where Log files are stored.
Temp file directory :"C:\IMAJICA\TEMP\"
* Directory where node sensitive directories are.
Archive directory :"C:\IMAJICA\ARCS\"
* Directory where all archive and testing utilities
are stored.
Protocol directory :"C:\IMAJICA\PROT\"
* Directory where all protocol utilities are stored.
F-Mail directory :"C:\IMAJICA\FMAIL\"
* Directory where private file transfers are stored.
*. Last T-File edit date :05/29/93
* Date at which most recent text file was added.
System Passwords
SysOp password :GHOST
* Defines password for access to sysop menu and
functions.
New user password :
* If defined, newusers must enter correct password to
apply to system.
Shuttle Logon password:CLIVE
* Password for shuttle logon menu.
Change (A-C) : _
Modem Configuration
General Modem Settings
Imajica is set up with this configuration:
NODE 1 : Comm 1
NODE 2 : Comm 2
NODE 3 : Comm 3
NODE 4 : Comm 4
If you boot up using "IMAJICA /N1", the BBS will load NODE 1 Modem
configuration. Although, by default, this is set to comport 1, you
could possible run NODE 1 off of any Comport. To change other
nodes modem configuration, you will have to run the other node.
HINT: It's a good idea to boot up in "/L"ocal mode while doing this.
Maximum baud rate : 19200
COM port number : 1
Modem init string : "ATH0V0X4&B1&A3&H1&R2M1S0=1"
Modem answer string : "ATA"
Modem hangup string : "ATH0"
Modem offhook string : "ATH1M0"
No-call init time : 30
ARQ rate baud : 19200 baud
CTS flow control? : Yup
DSR flow control? : Yup
XON/XOFF on? : Nah
Force baud rates? : Yup
Modem result codes:
ACS for this node : s10
Path for dropfiles : C:\IMAGE
Modem IRQ String - %E: IRQ4
Modem Port Addr - %D: 0x3f8
Chat Normal: [Tadpole] L. Chat Anon. : [???]
Chat Global: [Tadpole Global] N. Chat Priv. : [Tadpole Private]
Enter selection [1-7,A-N]: _
Maximum baud rate : 19200
* Maximum baud rate of your modem.
COM port number : 1
* Comport you are using.
Modem initialization string:
"ATX1S0=0S2=43&A0&B1&H1&R2&V0"
* You will probably have to consult your modem's manual
on this subject.
Modem answer string : "ATA"
* String sent to modem when incoming call is received.
Modem hang-up string : "~~~+++~~~ATH0"
* String sent to modem when command to hang-up is received.
Modem off hook string : "ATH1M0"
* String sent to modem to take phone off hook.
No-call init time : 30
* Time BBS will wait with no activity before re-
initializing itself.
ARQ rate baud : 19200 baud
* Rate at which BBS locks the comport.
CTS flow control? : Yes
* Should modem use Clear to Send flow control?
(Hardware control)
DSR flow control? : Yes
Should modem use Data Send Ready flow controls?
XON/XOFF on? : No
* Should modem use XON/XOFF signals?
(Software control)
Force baud rates? : Yes
* Should the BBS lock the comport at specified speed?
Modem result codes:
* See Below.
ACS for this node : Auto-upload. NDE.
* Security required to log in on this node.
Path for drop files :
* Path to create Door Drop files.
Port IRQ String :
* String used by external programs for non-standard IRQ's.
Port Address String :
* String used by external programs for non-standard Addresses.
Telechat prompt for normal transmission.
Telechat prompt for Anonymous transmission.
Telechat prompt for Global transmission.
Telechat prompt for Private transmission.
Result Codes:
Modem configuration - Result Codes
(ARQ) (V32) (V32/ARQ)
NO CARRIER : 3
NO DIALTONE : 6
BUSY : 7
CONNECT 300 : 1 0 0
CONNECT 1200 : 5 15 0
CONNECT 2400 : 10 16 0
CONNECT 4800 : 18 38 39
CONNECT 9600 : 17 33 37
CONNECT 14400 : 26 45 46
Enter selection or (Q)uit: _
* Please consult your modem's manual for correct Result Code
setup for your modem. The above codes and modem settings work
well with USRobotics Sportster 14400 modems.
System ACS Settings
System ACS settings
Full SysOp :"s255u1" B. Full Co-SysOp :"s250"
Message base SysOp :"s199" D. File base SysOp :"s230"
SysOp PW at logon :"s250" F. See PW's remotely :"s255"
Post public :"s11" H. Send e-mail :"s11"
See anon pub post :"s255u1" J. See anon E-mail :"s255u1"
Post anon ANY base :"s255u1" L. E-mail anon :"s100"
See unval. files :"s255u1" N. DL unval. files :"s230"
No UL/DL ratio :"s255" P. No post/call ratio :"s255"
No file pt checking:"s255" S. ULs auto-credited :"s21"
Enter selection (A-S) [Q]uit : _
Full SysOp :"s255u1"
* Defines internal sysop access.
Full Co-SysOp :"s250"
* Defines internal co-sysop access.
Message base SysOp :"s199"
* Defines internal message base sysop access.
File base SysOp :"s200"
* Defines internal file base sysop access.
SysOp PW at logon :"s255"
* Minimum security level to ask for sysop password.
See PW's remotely :"s255u1"
* Minimum security required to see passwords remotely.
Post public :"s30"
* Minimum security required to post a public message.
Send e-mail :"s30"
* Minimum security to send private mail.
See anon pub post :"s200"
* Minimum security to see who posted public "anonymous".
messages.
See anon E-mail :"s100"
* Minimum security to see who posted private "anonymous".
Post anon ANY base :"s255"
* Minimum security to post anonymous in any base.
E-mail anon :"s200"
* Minimum security required to post anonymous private mail.
See unval. files :"s200"
* Minimum security to see unvalidated files.
DL unval. files :"s230"
* Minimum security to download unvalidated files.
No UL/DL ratio :"s50"
* Minimum security for no upload/download ratios.
No post/call ratio :"s30"
* Minimum security for no post/call ratios.
No file pt checking:"s250"
* Minimum security for no file point checks.
ULs auto-credited :"s50"
* Minimum security for uploads to be automatically
credited to users account.
Miscellaneous Settings
General Miscellaneous
Miscellaneous configuration
System start-out menu :LOGON
Default bulletin prefix file:BULLET
Highest Ansi-Conference :2
Define Auto-Mail :
Enter selection (A-D) [Q]uit : _
System start-out menu :LOGON
* Starting menu for all users.
Default bulletin prefix file:BULLET
* Default bulletin prefix. "BULLET1.ASC, BULLET2.ASC"
Highest ANSI-Conference :2
* Highest ANSI Conference available for users (0-5).
Define Auto-Mail :
* See next chapter.
Enter selection (A-D) [Q]uit : _
Define AutoMail
Imajica allows the sysop to customize the "automatic" messages that
users receive for various reasons. There are 4 included routines in
this version.
FILENAME: This is the actual name of the text file the BBS will use as
the message body. This should reside in the \MISC\ path.
TITLE : This is the actual message title.
# Filename Message Title
------------------------------------
HANGUP.ASC INCORRECT HANG-UP PROCEDURE
* Mail is sent when the board registers a user not logging
off correctly.
FILEREW.ASC FILE POINT REWARD
* Mail is sent if another user downloads a file that this user
has uploaded. This routine appends the sysop prepared text file
with the filename and point reward.
DELFILE.ASC FILE REMOVAL
* Mail is sent if a file is removed that this user has uploaded.
This routine appends the sysop prepared text file with the
filename and points (if any) that were removed along with
a one-line reason from the sysop.
DECLFILE.ASC DECLINED FMAIL
* Mail is sent to user if Private File transfer was declined.
FUTURE FUTURE
* This is for future expansion. (got any ideas?)
AutoMail allows you do personalize the automatic memos the board
sends to users when they hang up incorrectly, get file point rewards,
have files removed, or declined a private file.
Files should reside in the \MISC\ directory.
Enter selection: _
System Variables
System variables
Max private sent per call:20 B. Max feedback sent per call:5
Max public posts per call:20 D. Max chat attempts per call:3
Normal max mail waiting :15 F. CoSysOp max mail waiting :50
Normal max lines/message :120 H. CoSysOp max lines/message :160
Number of logon attempts :4 J. Backspace delay :20
SysOp chat color :9 L. User chat color :3
Min. space for posts :10 N. Min. space for uploads :100
Back SysOp Log keep days :14 P. Blank WFC menu minutes :0
Default video line length:80 S. Default video page length :24
Ask BDay per # logons :0
Enter selection (A-T) [Q]uit : _
Max. private sent per call:20
* Maximum private mail a user can send per call.
Max. feedback sent per call:5
* Maximum "Notes to SysOp" a user can send per call.
Max. public posts per call:30
* Maximum public message posts per call.
Max. chat attempts per call:10
* Maximum times user can attempt to chat with sysop.
Normal max mail waiting :15
* Maximum private mail waiting for users.
CoSysOp max mail waiting :50
* Maximum private mail waiting for co-sysops.
Normal max lines/message :40
* Maximum number of lines per message.
CoSysOp max lines/message :160
* Maximum number of lines per message for co-sysop.
Number of logon attempts :2
* Maximum number of logon attempts before system hangs up.
Backspace delay :20
* Backspace delay.
SysOp chat color :4
* Color of text when SysOp "chats".
User chat color :3
* Color of text when User "chats".
Min. space for posts :10
* Minimum kilobytes of disk space available for posts.
Min. space for uploads :200
* Minimum kilobytes of disk space available for file transfers.
Back SysOp Log keep days :99
* Keep sysop logs for how many days...
Blank WFC menu minutes :0
* Minutes before the WFCMenu blanks.
Default video line length:80
* Default video line length.
Default video page length :24
* Default video page length.
Ask BDay per # Logons :0
* Number of logons before Birthday Security is checked.
System Flagged Functions
System flagged functions
Force ZModem as default? :Off B. Import File_ID.DIZ? :No
Handles allowed on system:On D. Use ARJ as default :Off
Local security protection:Off F. Local screen security :Off
Global activity trapping :Off H. Auto chat buffer open :Off
Use Subscription System :Yes J. Bulletins in logon :Off
Last few callers in logon:Off L. "Your info" in logon :On
BBS is multinode capable :On N. Offhook in local logon :On
Mandatory voting :Off P. Compress file/msg numbers :On
UL duplicate file search :On S. SysOp Log type :File only
Strip color off SysOp log:Off ". [Trap Telechat Sessions? ]:Off
Use BIOS for video output:On W. Suppress snow on CGA :Off
Use EMS for overlay file :On
New user message sent to :1 2. Guest user number :100
Mins before timeout bell :2 4. Mins before timeout :5
Enter selection (A-X,1-4) [Q]uit : _
Use ZModem as default :On
* Use ZModem as default QWK archive, or allow user to configure.
Import FILE_ID.DIZ? :On
* Check incoming uploads for FILE_ID.DIZ files?
Handles allowed on system:On
* Are handles allowed as opposed to real names only.
Use ARJ as default :On
* Use ARJ as default QWK compression, or allow user to configure.
Local security protection:Off
* Do not show passwords on the local screen.
Local screen security :Off
* Password protect the WFCMenu?
Global activity trapping :Off
* Record ALL users activity in the TRAP*.LOG?
Auto chat buffer open :Off
* Automatically log all chatting sessions?
Auto Message in logon :On
* Display Auto message at logon?
Bulletins in logon :On
* Display Bulletins at logon?
Last few callers in logon:On
* Display "Last few Callers" at logon?
"Your info" in logon :On
* Display User Information at logon?
BBS is Multinode capable :On
* Is BBS in Multinode mode?
Off hook in local logon :Off
* Take phone off hook during local logon sessions?
Mandatory voting :Off
* Is voting mandatory?
Compress file/msg numbers :On
* Should message and file bases be renumbered according to
users access to them?
UL duplicate file search :On
* Should the BBS search for duplicate filenames before allowing
an upload?
SysOp Log type :File only
* SysOp log options: File, printer, or both.
Strip color off SysOp log:Off
* Strip color codes for SysOp Logs?
Trap TELECHAT sessions? :Off
* For trapping multiline chat sessions.
Use BIOS for video output:Off
* Use BIOS screen writes?
Suppress snow on CGA :Off
* Supress snow while in CGA mode?
Use EMS for overlay file :Off
* Load Overlay file into EMS memory?
New user message sent to :1
* User number that all new user messages are sent to.
Guest user number :Off
* User number for "Guest" users.
Mins before timeout bell :2
* Minutes before BBS will warn user to do something or it
will timeout.
Mins before timeout :5
* Minutes the program sets idle before it will automatically
log the user off.
File Section Configuration
File section configuration
Archive configuration
Upload/download ratio :In-active
Auto file point compensation :In-active
File point compensation ratio :3 to 1
Base file size per 1 file point:10k
Upload time refund percent :115%
"To-SysOp" file base :1
Auto-validate ALL files ULed? :Nah
Remote DOS re-direction device :CON
Max k-bytes allowed in WORK dir:500
Min k-bytes to save for resume :100
Point rewarding system :Active
Point reward compensation ratio:100%
Enter selection (A-M) [Q]uit : _
Archive configuration
* See next section.
Upload/download ratio :In-active
* Ratio of uploads you have to maintain to download.
Auto file point compensation :Active
* Immediatly credit user's account for upload?
File point compensation ratio :1 to 1
* Ratio of points rewarded back to you for uploads.
Base file size per 1 file point:10k
* Number of kilobytes per 1 file point.
Upload time refund percent :100%
* Amount of time refunded for uploads.
"To-SysOp" file base :1
* Base that files "To: Sysop" are kept.
Auto-validate ALL files ULed? :No
* Place all files on board without manual validation?
Remote DOS re-direction device :CON
* Where to send DOS shell output.
Max k-bytes allowed in WORK dir:500
* Maximum kilobytes allowed in the WORK directory.
Min k-bytes to save for resume :100
* Minimum kilobytes of file transfered before the BBS will save it
as a "resume" file.
Point rewarding system :Active
* Whether or not to reward uploaders when their files are downloaded.
Point reward compensation ratio:100%
Ratio of points to be awarded for uploads.
Archive Configuration
Archive configuration edit
Archive comment file: CMT1.TXT
Archive comment file: CMT2.TXT
Archive comment file: CMT3.TXT
NN:Ext:Compression cmdline :Decompression cmdline :Success Code
--:---:-------------------------:-------------------------:------------
ZIP PKZIP -aex @F @I PKUNZIP @F @I 0
GIF 0
PAK PAK a @F @I PAK e @F @I -1 (ignores)
LZH LHA a @F @I LHA e @F @I 0
ZOO ZOO aP: @F @I ZOO x @F @I 0
ARJ ARJ a @F @I ARJ e @F @I 0
Archive edit (Q,?=help) : _
* This menu allows you to add, delete, position, or modify any
entry. Below is an example of the screen you will get to
(M)odify command # 1:
Archive #1 of 6
Active : Yup
Extension name : ZIP
Interior list method : "/1" - *Internal* ZIP viewer
Compression cmdline : PKZIP -aex @F @I
Decompression cmdline : PKUNZIP @F @I
Integrity check cmdline: PKUNZIP -t @F
Virus scan cmdline : SCAN /NOMEM @F
Gif test cmdline : GIFFER @F /R:640X480,256
Add comment cmdline : PKZIP -z @F < @J
Errorlevel for success : 0
Quit
Edit menu: (1-0,[,],Q) : _
Active : Yes
* Whether or not the archive is available for use.
Extension name : ARJ
* The Archive file extention.
Interior list method : ARJ l @F
* The interior list command.
Compression cmdline : ARJ a @F @I
* The compression command.
Decompression cmdline : ARJ e @F @I
* The decompression command.
Integrity check cmdline: ARJ t @F
* The integrity test command.
Virus scan cmdline : SCAN /nomem @F
* The virus scan command. (SCAN.EXE is used in this
example)
Gif test cmdline : GIFFER /R:640X480,256 @F
* If the file is a GIF file, this is the commandline
for the GIF resolution tests. (GIFFER.EXE is used in
this example) Any external resolution tester can be
used as long as it returns an exit errorlevel to DOS.
Add comment cmdline : ARJ c @F -zcomment.txt
* Archive comment command.
Errorlevel for success : 0
* Errorlevel utility should pass to DOS upon successful
completion of testing.
Quit
Subscription & Access Levels
When choosing the command "Subscription an Access Level Edit", you
will be prompted to enter a subscription level. Level "0" is the
default new user subscription level. Each level has it's own
validated and unvalidated security settings, allowing for a multitude
of clearance levels. There are 5 subscription levels.
# Title Length SL /DSL Forums
- ------------ ----------- --- --- ----------------------------
New User 1 month 40 /40 -------G-------------------
Prob. 1 months 40 /40 -A-----G-I---M--P--S-------
Level 1 ACS 3 months 50 /50 -A-----G-I---M--P----------
Level 2 ACS 12 months 50 /50 -A-----G-I---M-----S-------
Co-SysOp 12 months 60 /60 -A-----G-I---M--PQ---------
Sysop 12 months 255/255 -A-----G-I---M-----S-------
Which Subscription Level (0-5): _
Subscription 1 configuration Prob.
!. Subscription name :Prob.
New user security level :40
New user download security level :40
New user AR flags :-------------------T------
New user AC flags :---B-*--K-UF/1-34
New user filepoints :1000
Validated security level :40
Validated download security level :40
Validated AR flags :--------------------------
Validated AC flags :---B-*--K-UF/1-34
Subscription Forums :-A-----G-I---M--P--S-------
Length in months until expiration :1 months
Enter selection (A-K,!) [Q]uit : _
Network Configuration
Network configuration
Net address : 299:1/0
Origin line : "The Tidepool BBS - Imajica's Homefront BBS"
Strip IFNA kludge lines : Yup 1. Color of standard text : 0
Strip SEEN-BY lines : Yup 2. Color of quoted text : 7
Strip origin line : Nah 3. Color of tear line : 9
Strip centering codes : Yup 4. Color of origin line : 3
Strip box codes : Yup
Center box/center lines : Yup
Add tear/origin lines : Yup
Default Echomail path :
Default Groupmail path :
Netmail path :
Netmail attributes : PCKH
Enter selection (A-I,1-4) [Q]uit : _
Net address : 299:1/0
Address AKA Configuration
*This address is used as the default address
Modify which AKA? [0-9,Q=Quit] : _
* These are the addresses you wish to use for your systems default
addresses.
Origin line : "The Other Board - Imajica Origin"
* The line appended to the end an Echomail message showing the
origin of the message.
Strip IFNA kludge lines : Yes
* Toggles the stripping of IFNA kludge lines from incoming
messages.
Color of standard text : 0
* Sets the color of the message text.
Strip SEEN-BY lines : Yes
* Toggles the stripping of "Seen-by" lines from incoming
messages.
Color of quoted text : 7
* Color of Quoted message text.
Strip origin line : No
* Strip origin line from incoming messages.
Color of tear line : 9
* Color of tear line in message.
Strip centering codes : Yes
* Toggles the stripping of text centering codes from incoming
messages.
Color of origin line : 3
* Color of origin line.
Strip box codes : Yes
* Toggles the stripping of box codes from incoming messages.
Center box/center lines : Yes
* Obey box/center codes in messages?
Add tear/origin lines : Yes
* Add tear and origin lines to messages?
Default Echomail path : c:\imajica\msgs\echomail
* Path where echomail files are kept.
Default Groupmail path :
* Path where groupmail files are kept.
Netmail path :
* Path where netmail files are kept.
Netmail attributes : PCKH
* Netmail attributes -
Private
Crash
Kill - Sent
Hold
Offline Mail Configuration
Offline Mail Configuration
QWK/REP packet name : TIDEPOOL
Welcome screen name : WELCOME
News file name : NEWS
Goodbye file name : GOODBYE
Local QWK/REP path : C:\IMAGE\TEMP\NODE1\MSG
Download Time Refund : 0%
Maximum Msgs per QWK : 1000
Maximum Msgs per Base: 100
Enter selection (A-H) [Q]uit : _
QWK/REP packet name: IMAJICA
* Name of the QWK packet to be created.
Welcome screen name: WELCOME
* Name of the welcome screen to be included in packet.
News file name: NEWS
* Name of the news file to be included in packet.
Goodbye file name: GOODBYE
* Name of goodbye file to be included in packet.
Local QWK/REP path:
* Path to place locally created QWK packets
Download Time Refund: 100%
* Percentage of time refunded for QWK packet transfers.
Maximum Msgs per QWK : 2000
* The maximum number of messages the board will pack into a QWK
session.
Maximum Msgs per BASE: 200
* The maximum number of messages the board will pack per base.
String Configuration
Strings will accept universal MCI codes, and either ^# color codes, or
CTRL-P/# color changes.
String configuration - page 1 of 6
Logon note #1:Enter NAME or USER NUMBER
Logon note #2:- NEW USERS enter "NEW" -
* These strings are displayed to users when they log on.
Logon prompt :Logon :
* Prompt for users name/handle.
Echo chr :î
* Character displayed during secured password entry.
SysOp IN :Greg is currently available for chat.
* Prompt if sysop is available for chat.
SysOp OUT :Greg is not available for chat at this time.
* Prompt if sysop is not available for chat.
Engage chat :You are now entering chat mode, you may start typing ...
* Prompted when chat is engaged.
Exit chat :Chat has been terminated.
* Prompted when chat is terminated.
Sysop working:Moment of SILENCE
* Prompted while sysop is shelling to DOS or modifying users access.
Users keys are disabled.
Pause screen :-- -- 00 -- --
* Displayed while screen pauses and waits for keypress.
Enter selection (A-I,[,]),(Q)uit : _
String configuration - page 2 of 6
Message entry L#1:Enter message now. You have 160 lines maximum.
* Displayed as header line 1 when engaging message editor.
Message entry L#2:Enter /S to save. /? for a list of commands.
* Displayed as header line 2 when engaging message editor.
Imijascan start :[2 msgs] ImajiScan began.
* Displayed at the beginning of a new message scan.
Imajiscan done :[General - System Announcements ] ImajiScan complete.
* Displayed at the end of a new message scan.
Read msgs prompt :[General]
[System Announcements] Read (##,CR=Next Msg,?) :
* Displayed as the prompt while reading messages.
Automessage by: :Greeting posted by :
* Automessage header display prompt.
Auto border char.:_
* Automessage boarder character.
Enter selection (A-G,[,]),(Q)uit : _
String configuration - page 3 of 6
Shell to DOS L#1 : Sysop has shelled to DOS, please wait ...
* Displayed when sysop shells to DOS.
Shell to DOS L#2 : Thank you for waiting
* Displayed when sysop returns from DOS shell.
Chat call L#1 :Paging Greg Siler for chat, please wait...
* Displayed when chat page begins.
Chat call L#2 :-- -- ++ -- --
* Displayed per "call cycle" during a chat page attempt.
Guest user info :Enter "GUEST" as your user name.
* Guest user information line. (when applicable)
Name not found :That name was not found in the user listing.
* If name wasn't found during a user search.
Bulletin line :Enter Bulletin Selection (##,?,Q=Quit) :
* Line displayed while at the Bulletin Menu.
Thanks for voting:Thank you for voting!
* Prompted when completing voting booth.
Quote line 1 : [THESE PROMPTS WILL NOT DISPLAY CORRECTLY HERE]
* Prompted as the first header line in a quote.
Quote line 2 : [THESE PROMPTS WILL NOT DISPLAY CORRECTLY HERE]
* Prompted as the second header line in a quote.
Enter selection (A-J,[,]),(Q)uit : _
String configuration - page 4 of 6
List line :List files (P) to pause
* Prompted after choosing (L)ist files.
File NewScan line:Search for new files
* Prompted after choosing new file scan.
Search line :Search all directories for file mask
* Prompted for a search line entry.
Find Descrip. L#1:Search includes all filenames and descriptions.
* Prompted for a search description entry.
Find Descrip. L#2:Enter the partial search string :
* Line 2 of above.
Download line :[ENTER] on blank line to initialize download.
* Prompted before entering filename to download.
Upload line :There is 15006k reserved for uploading
* Prompted before entering filename to upload.
View content line:View ARCHIVE interior -
* Prompted as view archive menu prompt.
Insuff. file pts :You have insufficient file points to downnload
* Prompted when user has insufficient file points to download.
Bad UL/DL ratio :You must upload more frequently than you have
* Prompted when user has unbalanced upload/download ratio.
Enter selection (A-J,[,]),(Q)uit : _
String configuration - page 5 of 6
P/N file info :P to PAUSE, N for NEW directory
* File scan help prompt.
Get filespec L#1 :[ENTER] for ALL files
* Prompted for Filename search, line 1.
Get filespec L#2 :File mask :
* Prompted for Filename search, line 2.
Add to batch :Added file to your batch queue
* Prompted after you add files to batch queue.
File list prompt :(T)ag file, (Q)uit, (CR)Next page, (-)Previous :
* Prompt displayed during file listing.
Auto-Upload desc.:Auto-upload. NDE.
* String used as file description in auto-uploaded files.
Enter selection (A-F,[,]),(Q)uit : _
String configuration - page 6 of 6
User Question #1 :Would you be interested in running IMAJICA software?
User Question #2 :
User Question #3 :
User Question #4 :
Qstn #1 Prompt :SYSOP
Qstn #2 Prompt :
Qstn #3 Prompt :
Qstn #4 Prompt :
* User questions 1-4 are sysop definable questions that the BBS will ask
the user if he has not answered previously.
User prompts 1-4 are displayed on the User Editor information screen,
before the users answer is displayed.
Enter selection (1-8,[,]),(Q)uit : _
Conference Descriptions
Conference Name Tagging
Adult Forum B. NONE
NONE D. NONE
NONE F. NONE
General Forum H. NONE
IQNet Forum J. NONE
NONE L. NONE
NONE N. NONE
NONE P. Pre-Reg Adult
NONE R. NONE
Sysop Forum T. NONE
NONE V. NONE
NONE X. NONE
NONE Z. NONE
Forum editor (A-Z,* to Quit) :_
* Enter the forum you want to title, and enter the Title.
Color Configuration
Edit Multiple colors
* Allows you to edit color # schemes.
Edit B&W colors
* Allows you to edit B&W color shade schemes.
Enter selection (A-B) : A
Set multiple colors
Colors: (0-9)-(L)ist-(Q)uit :L
White on Black, High Intensity
White on Black
Blue on Black
Cyan on Black, High Intensity
Magenta on Black
White on Black
White on Blue, High Intensity
Red on Black
Red on Black, High Intensity, Blinking
Green on Black, High Intensity
Colors: (0-9)-(L)ist-(Q)uit :_
* Colors coorespond to the "^#" or the CTRL-P/# color change methods in
all strings, display files, and prompts.
User Ratios/Limits
* These sections including:
Time Limitations
Call Allowance per day
Upload/Download number of files per day
Upload/Download Kilobytes per day
Posts vs. Calls per day
Maximum downloads per day
Maximum downloaded kilobytes per day
are all modified the same way. They are all security level (SL) activated,
and can be individually defined for all SL's 0-255.
Editing: Time limitations
40 :75 60 :90 80 :110 100:130 120:130 140:130
41 :75 61 :90 81 :110 101:130 121:130 141:130
42 :75 62 :90 82 :110 102:130 122:130 142:130
43 :75 63 :90 83 :110 103:130 123:130 143:130
44 :75 64 :90 84 :110 104:130 124:130 144:130
45 :75 65 :90 85 :110 105:130 125:130 145:130
46 :75 66 :90 86 :110 106:130 126:130 146:130
47 :75 67 :90 87 :110 107:130 127:130 147:130
48 :75 68 :90 88 :110 108:130 128:130 148:130
49 :75 69 :90 89 :110 109:130 129:130 149:130
50 :75 70 :100 90 :120 110:130 130:130 150:130
51 :80 71 :100 91 :120 111:130 131:130 151:130
52 :80 72 :100 92 :120 112:130 132:130 152:130
53 :80 73 :100 93 :120 113:130 133:130 153:130
54 :80 74 :100 94 :120 114:130 134:130 154:130
55 :80 75 :100 95 :120 115:130 135:130 155:130
56 :80 76 :100 96 :120 116:130 136:130 156:130
57 :80 77 :100 97 :120 117:130 137:130 157:130
58 :80 78 :100 98 :120 118:130 138:130 158:130
59 :80 79 :100 99 :120 119:130 139:130 159:130
Range settings (S)et (T)oggle (Q)uit : _
* You can (S)et each one individually, or (T)oggle From __ : To __.
Update System Averages
This command should only be used if System Averages become corrupt.
This command will update your system averages.
Multinode Support
BEFORE YOU CAN OPERATE MULTIPLE NODES, YOU MUST COMPLETE THE FOLLOWING
STEPS:
Choose "*" from the System Configuration Menu.
When chosen, you will see:
This command will make the necessary changes for multinode
support. It will totally shut down the system, therefore
cannot be performed while online.
Do you wish to continue? _
* This command cannot be performed while online. It will shut
the system and create node sensitive directories. You may
then use the command line "/Nx" where x is the node number,
to access other nodes. You must also have the System Flagged
Function "Multinode Support" flag turned ON.
User Editor
IMAJICA USER EDITOR [1 OF 89]
User name : TADPOLE L. Security : 255
Real name : GREG SILER M. D/Security: 255
Address : 213 Nowhere Lane N. AR:ABCDEFGHIJKLMNOPQRSTUVWXYZ
City/State: Nowhere, IN O. AC:---B----K---/1234
Zip code : 46802 P. Sex/Age : M29 (04/22/64)
AF Flags : A-----G-I---M---Q-S------- R. Phone num : 219-744-1881
Computer : IBM Compatible T. Last/1st : 03/19/94 (12/01/93)
Occupation: Bum V. Locked out: inactive
Reference : None W. Password : SLUGGERS
Status : [ACV] [TRP OFF] [GOOD] [SLNT] X. :
: Y. :
Call records- TC:968 TT:4802 CT:1 TL:970 TB:0
Mail records- PB:181 PV:84 FB:10 WT:1
File records- DL:7-0k UL:1-69k DT:9998-3000k
Pref records- EM:Ansi CS:Yes PS:Yes CL:Yes ED:F/S
Subs records- LV:5 CR:200 AF:0 EX:03/16/95 EC:0
Select item: _
[A - Y] Change/Edit information shown.
Change users Call Records.
Call records:
(0)Total calls: 968 (1)Total time on : 4802
(2)Calls today: 1 (3)Time left today: 970
(4)Illegal logon attempts: 0
Select: (0-4) [M]ail [F]ile [P]ref [S]ubs [Q]uit :_
Change users Mail Records.
Mail records:
(0)Pub. posts: 181 (1)Priv. posts : 84
(2)Fback sent: 10 (3)Mail waiting: 1
Select: (0-3) [C]all [F]ile [P]ref [S]ubs [Q]uit :_
Change users File Records.
File records:
# of DLs: 7 (1)DL k: 0
# of ULs: 1 (3)UL k: 69
Select: (0-3) [C]all [M]ail [P]ref [S]ubs [Q]uit :_
Change users Preference Records.
Preference records:
(0)Emulation: Ansi (1)Clear Screen: Yes
(2)Pause Scr: Yes (3)Color Monitr: Yes
(4)Editor : F/S
Select: (0-4) [C]all [M]ail [F]ile [S]ubs [Q]uit :_
Change users Subscription Records.
Subscription records:
(0)Subscription Level: 5 (1)Credits: 200
(2)Ansi Forum : 0 (3)Exp/Sub: 1
(4)Expiration Date : 03/16/95
Select: (0-4) [C]all [M]ail [F]ile [P]ref [Q]uit :_
[?] Miscellaneous Commands
User Editor help
(;) New list mode (:) Autolist toggle (\) Show SysOp Log
([) Back one user (]) Forward one user (=) Reload old data
({) Search backward (}) Search forward (*) Validate user
(+) Mailbox (U) Goto user name/# (S) earch options
(-) New user answers (_) Other Q. answers (^) Delete user
Change (?=help) :
; - You can select between full user editor screens, or just a
partial screen.
: - List without information.
\ - Show Sysop Logs.
{ - Search users forward with search options.
} - Search users backwards with search options.
* - Validate user (HARD) to # Subscription.
+ - Turn users mailbox on or off.
U - Go to user (by name, partial search, or number).
S - Search options. Allows searching for specific
user information. Search Topics include:
--" Search limiting options "--
General text : Inactive!
Search ACS : Inactive!
User SL : Inactive!
User DSL : Inactive!
User AR flags : Inactive!
User AC flags : Inactive!
User status : Inactive!
Days since last on : Inactive!
Days since first on: Inactive!
Number of calls : Inactive!
User age : Inactive!
User gender : Inactive!
# 1/10's call/post : Inactive!
#k DL/1k UL : Inactive!
# DLs/1 UL : Inactive!
User AF flags : Inactive!
Change (?=help) : _
- - View new user questionairre answers.
_ - View other questionairre answers by filename.
^ - Delete user, all his mail, and voting data.
Message Base Editor
* When you first enter the message editor, you will see something
that looks like the next line:
Enter Forum to Edit (AGHIMPS): _
The letters between the parenthesis indicate the conferences
that you have DESCRIPTIONS set up for. If you see:
Enter Forum to Edit (): _
Then STOP and go to the Conference Editor and set up at least
a "G" - General Conference. Otherwise, here is where you would
enter the conference in which the file bases reside that you
want to edit. Imajica will show ONLY the bases in the forum
you choose.
IMAJICA MESSAGE BASE EDITOR
Num:Base name :Flag:ACS :Post ACS :MCI ACS :MaxM:FT
===:=============================:====:==========:==========:==========:====:==
System Announcements L-U- s10 s200u1 s200 50 G
General Messages L-U- s10 s30 s30 100 G
Imajica Technical L-U- s10 s10 s200 100 G
Maynards Place L-U- s10 s30 s20 50 G
Message base editor (?=help) : _
NUM - Message base number (not compressed).
BASE NAME - Message base name.
FLAG - Message base flags.
ACS - Access required to read messages in current base.
POST ACS - Access required to post messages in current base.
MCI ACS - Access required to view MCI Codes in messages.
MAXM - Maximum messages allowed in base.
FT - Forum Tag (conference) the message base belongs to.
Message base #6 of 29
Name : Imajica Technical
Filename : IMAJTECH
Forum tag : G
Forum name : General Forum
Base type : Local
Message path: Unused
ACS req. : "s10"
Post/MCI ACS: "s10" / "s200"
Max Mess : 1000
Anonymous : No
Password : ""
*. Address : Local
Colors : Unused
Mail flags : Local
Origin line : Local
Flags : -U-
P-Index : 5
Quit
Edit menu (?=help) : _
Name : Imajica Technical
*Message base name
Filename : IMAJTECH
*The name of the *.MSG and *.BRD files the board will create
Conf Tag : G
*Conference tag. User MUST have this AF flag to gain access
Conf Name : General
*Conference name (setup in System Configuration -
automatically inserted if Conf Tag is valid)
Base type : EchoMail
*Base types include Local/Echomail/Groupmail/Netmail/INetQWK
Message path: C:\IMAJICA\MSGS\IMAJTECH\
*Path where Imajica will store the *.MSG files for front-end mailers
ACS req. : "s30!fx!fq"
*The main ACS String required for this message base
Post/MCI ACS: "s30" / "%"
*Posting access and use of MCI codes in messages
Max Mess : 300
*Maximum messages in this base (2000 max)
Anonymous : No
*Post Anonymous, Anyname, Realname, or Dear Diary
Password : ""
*Optionally password protect the message base
*. Address : 1:1/1.0
*Zone, Net, Node, and Point information for Echomail
Colors : Text=0, Quote=7, Tear=9, Origin=3
*Text colors, quote colors, and the extra lines inserted for
mailer functions - Tear and Origin are defined here. Valid
colors are 1 to 9.
Mail flags : KS-/CBMT
*Please see section on Echomail Base Flags.
Origin line : "The Tidepool - Imajica Origin (219) ###-####"
*This is the first line of two that are added to the end of a
message posted in an Echomail base. The second line is internal
and gives Imajica version information.
Flags : --A
*Please see section on Message Base Flags.
P-Index : 16
*This is the message bases Pointer Index. Cannot be changed.
Quit
?. Help
Enter # to modify, [ENTER] to redisplay screen
([) Back entry (]) Forward entry
(J)ump to entry (F) First entry in list
(Q)uit and save (L) Last entry in list
Toggles:
(R)eal names (A) Filter ANSI/8-bit ASCII
(U)nhidden
*Flags include forced Real name usage, filtering out all color
codes and hi-char sets, and whether visible to users without
access
File Base Editor
* When you first enter the file editor, you will see something
that looks like the next line:
Enter Forum to Edit (AGHIMPS): _
The letters between the parenthesis indicate the conferences
that you have DESCRIPTIONS set up for. If you see:
Enter Forum to Edit (): _
Then STOP and go to the Conference Editor and set up at least
a "G" - General Conference. Otherwise, here is where you would
enter the conference in which the file bases reside that you
want to edit. Imajica will show ONLY the bases in the forum
you choose.
IMAJICA FILE BASE EDITOR
Num:File base name :Flags :ACS :UL ACS :Name ACS :Maxf:F/P
===:========================:=======:==========:==========:==========:====:====
Upload All Files Here -G-N--K s30 s30 s30 2000 G 55
Imajica Software Directo ---NU-- s10d10 s200 2000 G 2
Miscellaneous Files ---N--- d30 2000 G 3
Games and Fun Stuff ---N--- s30 s30 s200 2000 G 24
Graphical Viewers & Such ---N--- s30 s30 s200 2000 G 25
Pascal Source Files ---N--- s30 s30 s200 2000 G 4
Communication Files ---N--- s30 s30 s200 2000 G 23
Netmail and Communicatio ---N--- s30 s30 s200 2000 G 5
Other BBS Programs ---N--- s30 s30 s200 2000 G 6
BBS Doors and Utilities ---N--- s30 s30 s200 2000 G 22
Swimsuit Gif's - G Rated -G---C- s40 u1 s40 2000 G 49
File base editor (?=help) : _
NUM - File base number (not compressed).
FILE BASE NAME - File Base Name.
FLAGS - File Base Flags
ACS - Security it takes to view files in current base.
UL ACS - Security to upload files into current base.
NAME ACS - Security to see file uploaders name.
MAXF - Maximum files this directory can contain.
F/P - Forum Tag current filebase belongs to, and base index
pointer.
File base #3 of 49
Name : Imajica Software Directory
Filename : IMAJICA
Forum Tag : G
Forum Name : General Forum
DL/UL path : D:\DLS\IMAJICA\ / Same
ACS req. : "s10d10"
UL/Name ACS : "" / "s200"
Max files : 2000
Password : ""
Arc/cmt type: ZIP/None
Dir depth : 0
*. Base Pointer: 2
Flags : ---NU--
Quit
Edit menu (?=help) : _
Name : Imajica Software Directory
* The current filebase name. (color and MCI codes accepted)
Filename : IMAJICA
* The filename (in this case - IMAJICA.DIR) the directory
file that contains individual file records. This is also
the filename for the extended discription records (in this
case - IMAJICA.EXT)
Forum Tag : G
* The current Conference Tag that this base belongs to.
Forum Name : General Forum
* The Conference Description (this will be automatically
updated if you have the conference set up).
DL/UL path : D:\DLS\IMAJICA\ / Same
* The directories that Imajica will place uploads in and search
for files to be transfered.
ACS req. : "s10d10"
* Security access required to view files in the current base.
UL/Name ACS : "" / "s200"
* Security access required to Upload and See Uploaders name
respectively.
Max files : 2000
* Maximum amount of file records the current directory can hold.
Password : ""
* Password protection for the current file base.
Arc/cmt type: ZIP/None
* Archive type - ARJ,ZIP,ARC,ZOO,PAK,LHA,GIF
Comment type - 1,2, or 3 - Cooresponding to the Comment File
names set up in the individual Archive Editors.
Dir depth : 0
* Directory Depth - Should ALWAYS be 0.
*. Base Pointer: 2
* The record number of the current base in the Directory File.
Flags : ---NU--
* See Section of File Base Flags
Quit
?. Help:
Enter # to modify, [ENTER] to redisplay screen
([) Back entry (]) Forward entry
Jump to entry (F) First entry in list
Quit and save (L) Last entry in list
Toggles:
NoRatio (U) Unhidden
Dir-header (I) *.DIR file in DLPATH
GifSpecs (C) CD-Rom
GifSpecs U/L
Edit menu (?=help) : _
Protocol Editor
IMAJICA PROTOCOL EDITOR
Num ACS Description
(Q)uit - Abort Transfer
(Q)uit - Abort Batch Transfer
(Q)uit - Abort Resume Transfer
(A)scii - Text File Transfer
(B)atch Modes
(N)ext - Skip To Next File
Xmodem
Xmodem-CRC
Ymodem
Ymodem Batch
Ymodem Resume
Ymodem-G
Ymodem-G Batch
Ymodem-G Resume
Zmodem
Zmodem batch
Zmodem Resume
HSLink
HSLink Batch
Protocol editor (?=help) : _
* Valid commands from this menu are (I)nsert, (D)elete,
(P)osition, (M)odify, and (Q)uit.
After choosing (M) to Modify, you will see something like the
following screen:
Protocol #12 of 18
!. Type/protocl:Active - Batch protocol
Keys/descrip:"G" / "(G) Ymodem-G Batch"
ACS required: ""
Temp. log : "%C\DSZ%N.LOG"
<U>L log : *None*
<D>L log : *None*
<U>L command: "dsz port %P estimate 0 %A restrict rb -g"
<D>L command: "dsz port %P estimate 0 %A sb -g @%L"
Codes mean :Transfer OK
<U>L codes :(1)"R" (2)"r" (3)"r" (4)"r" (5)"r" (6)"r"
<D>L codes :(1)"S" (2)"s" (3)"s" (4)"s" (5)"s" (6)"s"
Environ. cmd: "SET DSZLOG=%T"
DL File list: "%C\BATCH%N.LST"
Max DOS chrs:128 P. Log position: Filename: 51 - Status: 1
Edit menu (?=help) : _
!. Type/protocl:Active - Batch protocol
*Choices include single, batch, and resume
Keys/descrip:"Z" / "(Z) Zmodem"
*The command keys shown and a description of each
ACS required: ""
*Main security access to use this protocol
Temp. log : "%C\dsztemp.log"
*This is the name of the temporary log that is created
to build the permanent transfer log and determine the
success of the transfer. Not all protocols support this
file. (%C passes Imajica's main BBS directory)
<U>L log : "%C\xfer.log"
*Permanent upload transfer log.
<D>L log : "%C\xfer.log"
*Permanent download transfer log.
<U>L command: "dsz port %P speed %B rz"
*This is the main upload command that will be sent
to DOS to execute the protocol
<D>L command: "dsz port %P speed %B sz @%L"
*Main download command.
*UL and DL commands have 4 settings.
ASCII - pure ascii transfer. This is done internally by
Imajica.
COMMAND - (B)atch - Adds the current file to a batch queue.
(N)ext - Skips current file and, if wildcard is
selected, goes to next file.
EXTERNAL - Allows you to define a DOS line command. These
are defined in #5.
OFF - Toggles individual UL/DL commands on or off. Usefull
if you allow just uploading or downloading with
current protocol.
Codes mean :Transfer good
*Defines whether error codes translate to "Transfer Good" or
"Transfer Bad".
<U>L codes :(1)"" (2)"" (3)"" (4)"" (5)"" (6)""
<D>L codes :(1)"0" (2)"0" (3)"0" (4)"0" (5)"0" (6)"0"
*These are valid return codes for the protocol. 6 codes can
be defined for each UL/DL transfer. If the current protocol
uses a "0" return code for a successful transfer, then just
fill in the remaining slots with duplicate "0"'s.
Environ. cmd: "set DSZLOG=%T"
*Certain protocols require special environments to operate
correctly. If you use this function, make sure that the same
line is included in your AUTOEXEC.BAT.
DL File list: "%C\fi.lst"
*This is the permanent Download file list. This file is appended
with each transfer.
Max DOS chrs:128
*This is the maximum characters that Imajica will pass to DOS
Log position: Filename: 51 -
Status: 1
*This is (if used by protocol) the position of the return code
in the temporary log file. This returns the status of the transfer
to Imajica.
Menu Editor
Menu System Commands
Offline Mail
Cmdkey : !P
Function: Reset message pointers
Options :
Cmdkey : !D
Function: Download a .QWK Packet
Options :
Cmdkey : !U
Function: Upload a .QWK Packet
Options :
Cmdkey : !A
Function: Archive select (sysop can disable)
Options :
Cmdkey : !Z
Function: Set Message areas
Options :
Sysop Commands (W)
Cmdkey : *A
Function: Detects remote ansi
Cmdkey : *B
Function: Message Base Editor
Options :
Cmdkey : *C
Function: Change to another user
Option :
Cmdkey : *E
Function: Event Editor
Options :
Cmdkey : *F
Function: File Base editor
Options :
Cmdkey : *G
Function: Add Gif Specifications to current base
Options :
Cmdkey : *I
Function: Output votes to text
Options :
Cmdkey : *J
Function: Conference Tag/Name Edit
Options :
Cmdkey : *L
Function: Show SysOp Logs
Options :
Cmdkey : *P
Function: System Config Editor
Options :
Cmdkey : *Q
Function: Read Small Message
Options :
Cmdkey : *R
Function: Write Small Message
Options :
Cmdkey : *S
Function: Savescreen
Options :
Cmdkey : *T
Function: Textfiles Editor
Options :
Cmdkey : *U
Function: User Editor
Options :
Cmdkey : *V
Function: Voting Editor
Options :
Cmdkey : *X
Function: Protocol Editor
Options :
Cmdkey : *Y
Function: User list
Options :
Cmdkey : *Z
Function: System Activity Log
Options :
Cmdkey : *1
Function: Edit files in file area
Options:
Cmdkey : *2
Function: Sort files
Options :
Cmdkey : *3
Function: Read all private mail
Option :
Cmdkey : *4
Function: Download ANY file
Options : [filename]
Cmdkey : *6
Function: Upload locally
Options :
Cmdkey : *7
Function: Validate files
Options :
Cmdkey : *8
Function: Add GIF specs to files
Options :
Cmdkey : *9
Function: Pack Message Bases
Options :
Cmdkey : *#
Function: Menu Editor
Options :
Cmdkey : *$
Function: Full Directory
Options :
Cmdkey : *%
Function: Condensed Directory
Options :
Miscellaneous
Cmdkey : -C
Function: Display Message on sysop window
Options : [message]
Cmdkey : -F
Function: Displays a text file
Options : [filename]
Cmdkey : -L
Function: Displays line of text
Options : [text]
Cmdkey : -Q
Function: Read an infoform
Options : [filename]
Cmdkey : -R
Function: Read infoform answers
Options : [filename]
Cmdkey : -S
Function: Add line to SysOp log
Options : [string]
Cmdkey : ;
Function: Execute Macro
Options : [macro]
Cmdkey : -$
Function: Prompt for Password
Options : [password] ; [prompt] ; [badpw-msg]
* This option first displays the prompt (optional) then requires
user to input the password. If it's not valid and
[badpw-msg] file exists (optional), it will be displayed.
Cmdkey : -^
Function: Goto menu
Options : [menu name]
Cmdkey : -/
Function: Gosub menu
Options : [menu name]
* This option is used in conjunction with the "-\" Cmdkey.
This will go to a menu, and when the Cmdkey "-\" is
recieved, it will return to the previous menu.
Cmdkey : -\
Function: Return from menu
Options : [menu name]
* This option will return you to a previous menu if the
gosub command was used.
Archive
Cmdkey : AA
Function: Add files to archive
Options :
Cmdkey : AC
Function: Convert archive
Options :
Cmdkey : AE
Function: Extract files from archive
Options :
Cmdkey : AG
Function: Manipulate extracted files
Options :
Cmdkey : AM
Function: Modify comments
Options :
Cmdkey : AT
Function: Run Integrity tests
Options :
Cmdkey : AX
Function:
Options :
Cmdkey : AV
Function: Run Virus Scans
Options :
Cmdkey : AR
Function: Run Resolution Tests
Options :
Doors
Cmdkey : DC
Function: CHAIN.TXT (WWIV) Door
Option : [command to execute]
Cmdkey : DD
Function: DORINFO1.DEF (RBBS) Door
Option : [command to execute]
Cmdkey : DG
Function: DOOR.SYS (GAP) Door
Option : [command to execute]
Cmdkey : DS
Function: SFDOORS.DAT (SPITFIRE) Door
Options : [command to execute]
Cmdkey : DW
Function: CALLINFO.BBS (WILDCAT) Door
Options : [command to execute]
Cmdkey : D-
Function: Door with no interface file
Options : [command to execute]
Files
Cmdkey : FA
Function: Change file area
Option : [#,L=Lst,+,-]
Cmdkey : FB
Function: Add file to batch
Option :
Cmdkey : FD
Function: Download a file
Option :
Cmdkey : FE
Function: Batch queue edit
Option :
Cmdkey : FF
Function: Search for a description
Cmdkey : FL
Function: List files
Option :
Cmdkey : FN
Function: Newscan files
Option : [C=Crnt,G=Glob,#=Filebase]
Cmdkey : FP
Function: Change Pointer Date
Option :
Cmdkey : FS
Function: Search for a filespec
Option :
Cmdkey : FU
Function: Upload a file
Option :
Cmdkey : FV
Function: View an archive
Option :
Cmdkey : FY
Function: Show user's file info
Option :
Cmdkey : FZ
Function: Set file areas to newscan
Option :
Cmdkey : F@
Function: Create temporary directory
Option :
Cmdkey : F#
Function: Change file area
Option :
Hangup
Cmdkey : HC
Function: Carefull logoff
Options : [string]
*String is printed and user is prompted Yes or No.
Cmdkey : HI
Function: Immediate logoff
Options :
Cmdkey : HM
Function: Display string and logoff
Options :
Messages
Cmdkey : MA
Function: Change Message Area
Options : [L=List,+,-]
Cmdkey : MB
Function: Pack Bases/Shown
Options :
Cmdkey : ME
Function: Send Private Email
Options :
Cmdkey : MF
Function: Send AutoMail
Options : [# (1-5)]
Cmdkey : MK
Function: Edit/Delete Outgoing Email
Options :
Cmdkey : MM
Function: Read Private Mail
Options :
Cmdkey : MN
Function: Newscan messages
Options : [C=Crnt,G=Glob]
Cmdkey : MP
Function: Post a message
Options :
Cmdkey : MR
Function: Read a Message
Options :
Cmdkey : MS
Function: Scan messages
Options :
Cmdkey : MU
Function: List users with access to Current Base
Options :
Cmdkey : MZ
Function: Set message bases to scan
Options :
Multi-Node
Cmdkey : NL
Function: Online Users Listing
Options :
Cmdkey : NA
Function: Toggle Page Availablity
Options :
Cmdkey : NI
Function: Toggle Hidden Mode
Options :
Other
Cmdkey : O1
Function: Shuttle: ask for BBS Password
Options :
Cmdkey : O2
Function: Shuttle: Apply as new user
Option :
Cmdkey : O3
Function: Shuttle: Check for password
Option :
Cmdkey : OA
Function: Autovalidation
Option : [password]
Cmdkey : OB
Function: Add entry to BBS list
Option : [bbslist file]
Cmdkey : OC
Function: Page the Sysop for Chat
Option : [usernumber;string]
Cmdkey : OD
Function: Add or subtract file points
Option : [+/- (points)]
Cmdkey : OE
Function: Changes Message Conference
Option : [+]
Cmdkey : OF
Function: Toggles AR Flag
Option : [- off, + on, ! toggle]
Cmdkey : OG
Function: Toggles AF Flag
Option : [- off, + on, ! toggle]
Cmdkey : OH
Function: Toggles File Conference
Option : [+]
Cmdkey : OI
Function: Shows system info [Logon.*, System.*]
Option :
Cmdkey : OM
Function: Edit Macros
Option :
Cmdkey : OO
Function: Display Sysop Chat Reason
Option :
Cmdkey : OL
Function: List of todays callers
Option :
Cmdkey : OP
Function: Modify User info
Option :
[options - 1 : change address 2 : change age
: change emulation 4 : change city/state
: change computer type 6 : change job
: change handle 8 : change phone number
: change password 10: change real name
change screen size 12: change sex
change BBS reference 14: change zip code
update mailbox status 16: toggle ansi
toggle color 18: toggle pause
toggle hotkeys 20: toggle clrscr on msg
change colors 22: toggle help mode
N/A 24: N/A
toggle avatar 26: change ansi conference
Cmdkey : OQ
Function: Change File Conference
Option : [+(conf)]
Cmdkey : OR
Function: Change Message Conference
Option : [+(conf)]
Cmdkey : OS
Function: System Bulletins
Option : [bulletin_menu;bulletin]
bulletin_menu - Main screen displayed for bulletin menu.
* If "BULLETIN" then "BULLETIN.ANS" will display.
bulletin - name of the individual bulletin prefix's.
* If "BULLET" then valid bulletins will include:
"BULLET1.ANS", "BULLET2.ANS", etc...
Cmdkey : OT
Function: Text file menus
Option :
Cmdkey : OV
Function: Voting Booths
Option :
Cmdkey : OY
Function: User's info
Option :
Cmdkey : O$
Function: Time Bank
Option :
Cmdkey : O%
Function: Byte Bank
Option :
Auto-Message
Cmdkey : UA
Function: Reply to automessage
Options :
Cmdkey : UR
Function: Read automessage
Options :
Cmdkey : UW
Function: Write automessage
Options :
Here is an example of what you will see when you choose the
Menu Editor function:
Directory of C:\IMAGE\MENUS\*.mnu
ACCESS MNU ADULTFL MNU ARCHIVE MNU AUTO MNU BATCH MNU
BBSLIST MNU CONF MNU EMAIL MNU FANTMSG MNU FEEDBACK MNU
FILE MNU GADULTFL MNU GOODBYE MNU LOGON MNU MAIN MNU
MSG MNU MSGADULT MNU MSGMALE MNU OFFLINE MNU ONLINE MNU
PERSONAL MNU SCANF MNU SCANM MNU SCANMF MNU SCANMM MNU
SHUTTLE MNU SYSOP MNU SYSOPF MNU TIDEPOOL MNU
File(s) 6852608 bytes free
Menu editor (?=help) : _
Commands available from this prompt are:
(I)nsert - allows you to create a new menu.
(D)elete - allows you to delete a menu file.
(M)odify - allows you to modify an existing menu. This will
prompt for a menu name. Do not include the file extention.
If you choose the (M)odify command, a menu like this will be displayed.
Menu command "list" display.
# :KK-Typ-MString # :KK-Typ-MString # :KK-Typ-MString
--:---------------------- --:---------------------- --:----------------------
A -/ auto 10 M -^ scanm 19 Y OY
B -/ bbslist 11 N -/ feedback 20 . -/ online
C OC 12 O OO 21 $ O$ 60;600
E -/ email 13 P -/ personal 22 * -/ sysop
F -^ scanf 14 S OS 23 ! DG callback.bat
G -/ goodbye 15 T -S *> Entered TFil 24 Z -^ TIDEPOOL
/G HI 16 T OT 25 Z -/ access
I OI 17 V OV 26 /F DW fw.bat
L -F user.log 18 X OP 22
Menu editor (?=help) : _
From this menu, the following commands apply:
(M)odify
(P)osition
(I)nsert
(L)ong generic menu - this displays the screen that is displayed
when a user, using generic menus, presses the "?".
(S)hort generic menu - this is the display screen that is shown if
a user is using generic menus.
(T)oggle - this toggles between the display screen shown above, and
one that is longer and supplies more information.
- this toggles between the menu command display screen shown above,
and the menu information screen shown below.
Menu filename: MAIN
Menu titles :------ Imajica Main Menu ------
Menu title #2 :------ Time Left : [09:57:07] ------
Help files :MAIN.ANS / Generic
Prompt :Time Left: [09:57:07] (?=Help)
Main Menu :
(Time Left: [09:57:07] (?=Help)
Main Menu :)
ACS required :""
Password :N/A
Fallback menu :MAIN
Forced ?-level:None
Generic info :3 cols - 4/0/1
Flags :C--P-
Quit
Menu editor (?=help) :
This is the first line that will display when using generic menus.
MCI codes, ^# color codes, and ^P color codes will all work
with these strings. Line two is similar.
The first help file is the file that will display in place of the
generic menu. Compatible file formats are text (.ASC) and
ANSI (.ANS). TheDraw is recommended for the creation of .ANS
files. ^P or ^# codes along with all MCI codes are valid in
either file.
The second help file is the file that is displayed in place of the
"long generic menu" screen. Usually pulled up with a "?".
Valid Filenames and Results:
Example menuname: MAIN
Example SL : 30
MAIN - This will display "MAIN.ANS"
MAIN@S - This will display "MAIN###.ANS" where ### is
the users security level (SL)
MAIN.AN0-AN6
- These will be displayed only on the day of week
created for.
- Sunday
- Monday
- Tuesday
- Wednesday
- Thursday
- Friday
- Saturday
MAIN.1NS-5NS
- These are used instead of the normal .ANS files
if you have Ansi Conferencing enabled.
Ansi Conference 1 will display files with a .1NS,
Ansi Conference 2 with a .2NS, etc.
These can also be used in conjunction with the day
of week commands.
Examples:
MAIN@S - Displays "MAIN30.ANS"
MAIN.ANS - Displays "MAIN.ANS" if ansi conferencing
is disabled.
MAIN.1NS - Displayed to users in ansi conference 1.
MAIN.1N6 - Displayed to users in ansi conference 1
on Saturdays.
If none of the files are found, the BBS will display
generic menus.
This is the display prompted at the bottom of the menu screen.
MCI and color codes accepted.
This is the required ACS (access) to enter this menu. (See ACS)
This is where you password protect menus if you wish.
This is the menu that will be executed if access is not allowed, or
if for some reason the BBS cannot access the menu file.
These are your online help levels. Current levels are:
- No forced help.
- Expert level - only display prompts are shown.
- Normal level - only menu file (or generic) and prompt
are displayed.
- Novice level - long generic menus (or help files) are
displayed with prompt.
This is where you set the generic menus colors and number of
columns.
Menu flags are listed below:
(C)lear screen before menu
* If on, the screen is cleared before the menu is displayed.
(D)on't center the menu titles
* If on, the menu titles are flush left.
(N)o menu prompt displayed
* If on, the menu prompt will not display.
(P)Force pause before menu display
* If on, there will be a forced pause before menu is displayed.
(T)Auto-time display
* If on, the time is automatically displayed.
Modifying Menu Commands
After choosing to modify an individual menu command, you will be
prompted a screen similar to this one:
Menu filename: MAIN
Command #1 of 26
Long descript :(A)uto-Message - Go to the auto-message menu
Short descript:(A)uto-Message
Cmd letters :A
ACS required :"s30"
Cmdkeys :-/
MString :auto
Flags :None
Quit
Edit menu (?=help) : _
This is the description that will be displayed if the user
is A) using "novice" help level
using "normal" help level and types "?"
This is the description that will be displayed if the user
is A) using "normal" help level
using "expert" help level and types "?"
This is the actual letters that the user must type to activate
menu item.
This is the security level that the user must satisfy to use the
menu item.
This is the actual 2-char. menu command (see Menu System Commands)
This is the options that are passed to the menu command routine
(see Menu System Commands)
This toggles whether or not the menu item is (H)idden or
(U)nhidden. If a user does not have access, and the command
is (U)nhidden, the user will still SEE that menu command.
This will save changes and exit.
Event Editor
IMAJICA EVENT EDITOR
#:Description :Typ:Bsy:Time :Len:Days :ExecData
==:==============================:===:===:=====:===:=======:============
Pack message bases PAK 1 13:30 1 SM-WT-S pak
Nightly events DOS 1 01:15 1 SMTWTFS night.bat
Sysop Access Window ACS 0 07:45 10 SMTWTFS s255
Event editor (?=help) : _
* Valid commands from this prompt are :
(I)nsert new event
(D)elete new event
(P)osition event
(M)odify event
Modify screen :
Event #2 of 3
!. Active : No
* this toggles the event active.
Description: Nightly events
* this is a description of the event.
Sched. type: DOS shell
* this is the event type (see SCHEDULE TYPES below)
Event data : night.bat
* these are passed parameters (see EVENT DATA below)
Busy time : 1 minutes
* minutes before event time to keep modem offhook.
Exec. time : 01:15
* time to execute the event.
Busy during: Yes
* Take phone off hook during event?
Duration : 1
* length of event.
Days active: SMTWTFS
* days to run event.
? - Help :
Enter item number to modify, [ENTER] to redisplay
([) Back entry (]) Forward entry
(J)ump to entry (F) First entry in list
(Q)uit and save (L) Last entry in list
Edit menu (?=help) : _
SCHEDULE TYPES
ACS : Security access required to logon
* this creates a security window that only users who satisfy
the security ACS are allowed on the system.
EVENT DATA should be the security access string.
CHT : Chat only event
* this creates a "chat only" window.
DOS : Dos commandline event
* this runs an external program or batch file.
EVENT DATA should be the DOS commandline.
EXT : Exit Imajica with an Errorlevel
* this forces the BBS to exit with an errorlevel.
EVENT DATA should be the level of exit.
PAK : Pack message bases event
* this will pack all message bases.
SFB : Sort file bases event
* this will sort all file bases and perform file offliner.
QWK : QWK mail event
EVENT DATA should be the name of the node configuration file.
Run-Time Errors
All runtime errors are fully explained on the command line and in
the "IMAJERR.LOG" located in the \LOGS\ directory. These include
the errorlevel number and a brief description of a possible
cause.
No error
File not found.
Path not found.
Too many open files.
File access denied.
Invalid file handle.
Invalid file access code.
Invalid drive number.
Cannot remove current directory.
Cannot rename across drives.
Disk read error.
Disk write error.
File not assigned.
File not open.
File not open for input.
File not open for output.
Invalid numeric format.
Disk is write-protected.
Unknown unit.
Drive not ready.
Unknown command.
CRC error in data.
Bad drive request structure length.
Disk seek error.
Unknown media type.
Sector not found.
Printer out of paper.
Device write fault.
Device read fault.
Hardware failure.
Division by zero.
Range check error.
Stack overflow error.
Heap overflow error.
Invalid pointer operation.
Floating point overflow.
Floating point underflow.
Invalid floating point operation.
Overlay manager not installed.
Overlay file read error.
System Flags
User AC Restrictions
USER RESTRICTIVE FLAGS
L Can logon ONLY once/day.
C Can't page SysOp for chat anywhere in the system.
V Posts marked unvalidated -- Marks all public messages
as "unvalidated" until the SysOp either validates
or deletes them.
B As of right now this flag has no function. It used
to restrict the user from using his backspace key,
which in some terminal emulations either froze the
system up, or caused very undesirable results on the
console screen.
A This flag is reserved for future use.
* This flag is reserved for future use.
P Can't post at all. This flag prevents users from posting
in ANY base, regardless of their security level.
E Can't send Email. This flag prevents the caller from
sending any Email to another user.
K This flag is reserved for future use.
M Mandatory reply or deletion of EMail. User must either
read and reply to private mail, or delete it.
F This flag restricts the user from attaching files to messages.
U This flag restricts the user from using ANSI menus, defaulting
to Generic Menus.
USER REWARD FLAGS
1 No UL/DL ratio check. This flag will suppress the
upload/download ratio check.
2 No File Kilobyte check. This flag will suppress the kilobyte
download check.
3 No file points check. This flag will suppress the
checking of a user's file points when requesting a
download of a file.
4 Protection from deletion. This flag will prevent a
user's account from being deleted.
File Base Flags
NO RATIO - No filepoints or ratios charged for file downloading.
UNHIDDEN - Filebase can be seen by everyone.
DIR-HEADER - This command does nothing in this release.
*.DIR FILE IN DLPATH - This will store the *.DIR in the download
path instead of the DATA path.
GIF SPECS - This will automatically insert GIF resolution into the
file description.
CD-ROM - This tells Imajica that the base is a CD-Base. This flag
is nessesary for the proper functioning of the CDRom player.
See Section on CDRom.
GIF SPECS U/L - This flag allows forcing of resolution testing
when a .GIF file is received as an uploaded file.
Message Base Flags
Message Base Flags
MESSAGE BASE FLAGS
A. - Filter out all hi-bit characters including ANSI escape codes.
This will leave plain text messages.
U. - Marks base UNHIDDED. This base will be seen by everyone, but not
be accessable unless security permits it.
R. - Real Names ONLY. This base will force the use of Real Names, not
Handles.
Echomail Flags
MAIL FLAGS:
K - Strip IFNA kludge lines.
S - Strip SEEN-BY lines (EchoMail only).
O - Strip origin lines.
C - Strip Imajica "center line" codes.
B - This flag is reserved for future use.
M - Center boxed/centered lines with spaces.
T - Add tear and origin lines to posted messages.
K - Toggles stripping of IFNA kludge lines from incoming
messages. Kludge lines begin with the ^A code (1 decimal),
and are not normally needed. Applicable to both EchoMail
and GroupMail bases.
S - Toggles stripping of SEEN-BY lines from incoming messages.
SEEN-BY lines define which nodes have received the message,
and are not normally needed once the message has been
received. Useful only for EchoMail bases, as GroupMail
messages don't have SEEN-BY lines.
E - Toggles stripping of origin lines from incoming messages.
The origin line identifies the system that originated the
message, and is usually desirable. Applicable to both
EchoMail and GroupMail bases (though GroupMail messages
aren't required to have origin lines).
F - Toggles stripping of "center line" codes from lines in
outgoing messages. The centering code (^B, or 2 decimal)
tells Imajica to display the line in the center of the
screen according to the current screen width. Unless you
are communicating strictly with another Imajica system,
this code has no meaning in FidoNet messages. Applicable to
both EchoMail and GroupMail bases.
B - Toggles stripping of "box line" codes from lines in outgoing
messages. The box code ("`#[") tells Imajica to enclose
the text in a box, centered on the screen according to the
current screen width. Unless you are communicating strictly
with another Imajica system, this code has no meaning in
FidoNet messages. Applicable to both EchoMail and GroupMail
bases.
C - Toggles centering of boxed/centered lines in outgoing
messages. If enabled, lines that start with a box or center
code will be centered on an 80-column line by padding the
line to the left with spaces. (This is only done if box
and/or centering codes are being stripped.) Applicable to
both EchoMail and GroupMail bases.
T - Toggles the automatic addition of tear and origin lines to
messages posted in FidoNet bases. The tear line will use
the BBS version number ("--- Imajica v3.15", for example).
Applicable mainly to GroupMail bases, as GroupMail messages
aren't required to have tear and origin lines (they are
mandatory, however, for EchoMail messages).
*Quoted line colors - Imajica will recognize a quote line
as being valid if it has a ">" within the first 5
characters.
Tear lines are the lines that display the program used
to process the Echomail. These lines usually start with
"---".
IQNet lines are the lines that display when an Echomail
message was sent via QWK packets rather than through the
standard Fidonet format. These lines begin with "...".
Menu Flags
Optional Files
Optional File Extentions:
Most optional file extentions can be either .ASC for
ASCII Text, .ANS for ANSI Text, or the Ansi Conference
extentions - random Ansi extentions - or day of week
extentions.
ANSI CONFERENCE- These files end in .1NS, .2NS, .3NS,
.4NS, and .5NS. If the user is in
conference 1, then the file *.1NS
will be displayed for each menu.
RANDOM ANSI - These files end in .AN1 - .AN9.
These are randomly chosen for each
menu viewed, and each time the menu
is updated.
DAY OF THE WEEK- These filenames end in 0 - 6. If the
menu name is MAIN, then valid filenames
would be:
SUNDAY : MAIN0.ANS
MONDAY : MAIN1.ANS
TUESDAY: MAIN2.ANS and so on...
You can also use the Day of Week Ansi's OR the Random Ansi's
in conjunction with the Ansi Conferencing.
Example : MAIN2.3NS
Will be displayed to user in Ansi Forum 3,
on Tuesdays.
Optional File Listing
These files should be placed in the \MISC\ directory.
MCI codes will work, but work best in ascii files.
Revent - displayed when event is approaching and user time is affected.
Timedout - displayed when user times out.
Prelog# - displayed immediatly following LOGON.???. [1..5]
Chatinit - displayed when chat is initated.
Chatend - displayed when chat is terminated.
Hangup## - displayed when using the F5 hangup function.
Notleft - displayed when user has no time left.
Nosysop - displayed when sysop is unavailable to chat.
Goaway - displayed when user tries paging more than allowed.
Sysopin - displayed when sysop is available for chat.
Sysopout - displayed when sysop is not available for chat.
Preshutt - displayed before shuttle logon menu.
Acsea## - displayed to users with AC during pre-event time.
Acseb## - displayed to users without AC during pre-event time.
No300h - displayed to 300 baud callers during restricted hours.
No300 - displayed to 300 baud callers if not allowed.
300yes - displayed to 300 baud callers if not during restriction.
Welcome - main welcome screen.
Welcome# - displayed in sequence after welcome screen.
Toocalls - displayed to 1 call per day users that have already called.
2manycal - displayed when user calls more than daily limit.
Tootime - displayed to user when time exceeds daily limit.
Postbday - displayed to user if logon occurs after birthday.
Birthday - displayed to user on their birthday.
Lastcall - displayed in place of lastcaller in logon.
Logon - main logon screen.
Logon## - displayed in sequence after logon screen.
Sl### - displayed to users with ### Sl.
Dls### - displayed to users with ### Dls.
Ar# - displayed to users with # Ar.
User### - displayed to user ###.
Uinf### - displayed in place of user info in logon.
Msghelp - displayed with (?) during message post.
Color - displayed with (C) during message post.
Reqfile - displayed previous to file request.
Dlhours - displayed if user tries to Dl during restricted hours.
Upload - displayed to user before upload.
Minidos - displayed as help for Minidos.
Protres - displayed if using resume protocol.
Protbul - displayed if using batch upload protocol.
Protbdl - displayed if using batch download protocol.
Protsul - displayed if using single upload protocol.
Protsdl - displayed if using single download protocol.
Batchul0 - displayed if batch uploading and upload queue is empty.
Batchul - displayed before batch uploading.
Logoff - displayed at logoff.
Logon - main logon screen.
System - system information.
Autoval - displayed if user autovalidates.
Newuser - displayed as newuser screen.
30Day - displayed when sub expires within 30 days.
15Day - displayed when sub expires within 15 days.
Subexp - displayed when sub has expired.
Nonewusr - displayed if closed system.
Newapp - displayed before 'New User Application'.
Maximum - displayed if system is at maximum user.
Specific Optional Files
FILEBASE / MESSAGEBASE AREA FILES
Imajica has the option of displaying an external text file
everytime the command "L" to list files is executed. The
filename is determined by the current filebase FILENAME.
If your .DIR file is named IMAJICA.DIR, then the file
displayed will be IMAJICA.ANS.
Using the "A" command to list message base or file base
areas can also trigger the display of another text file.
If you are in the G - General conference in the message
bases, and you hit the "A"rea list command, the file
"CONFG.ANS" will be displayed. Consequently, if you switch
to the file bases, and you are in the S - Sysop conference
there, your "A"rea list command would display the file
"CONFS.ANS".
If you want extended descriptions for your files, but don't
want to create a FILES_ID.DIZ or enter the extended info,
you can create an external display file that will be
displayed when a user uses the "I"nformation command on the
file list prompt.
EXAMPLE: Filename is DSZ0204.ZIP.
Create a display file called DSZ0204.IFD
and place it in the MISC directory.
This file will now be displayed each time
you call for information on it. *INFO*
flag will also be displayed on the file list.
CDRom
File base editing of CDRom bases is slightly different.
Below is a partial clip of a CDRom filebase.
D/Load Path : E:\X09\
* This is the path to the files on CD.
CDRom bases will NOT accept an upload. You must create a directory
to provide for uploads, if you are running all CDRom directories.
When uploading CDRom files to Imajica, use the "C"ontinuous upload
method. It is advisable to check the amount of files in each CD
directory, and adjust the File Base Maximum Files value if needed.
F/List Path : D:\X09\FILES.BBS
* This is the path and filename of the FILES.BBS or other
directory file list for automatic uploading of file
descriptions. The format for file lists is below:
FILE .EXT This is where the description starts.
^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
| | The file description starts on char. 20.
|
|------------------| The filename is padded to 8 characters.
This function is not available on the 3.15 Beta version, but is
available in Alpha testing right now. Beta's must do the following
to upload file descriptions to CD Bases:
Copy each individual directory list, i.e. "FILES.BBS", into
the \DATA\ directory and rename it the same filename as your
filebase .DIR file with the extention of .LST. IMAJICA.DIR
file description list would be called IMAJICA.LST. You may
now run the description uploading command (FX).
You must also take into consideration that in preparation for files to
be downloaded from a CDRom directory, the files tagged for download will
be transferred to the node temporary directory until transfer is completed.
If you allow a user to download 12 meg a day, you might want to be sure
you have 12 meg of HD space for the files to be stored providing the user
puts them all in one batch transfer queue.
Ascii Chart
Here is an ASCII translation chart for those of you who are tired
of searching your DOS manuals for the codes.
6 081: Q 108: l 135: ç 162: ó 189: + 216: + 243: _
7 082: R 109: m 136: ê 163: ú 190: + 217: + 244: _
8 083: S 110: n 137: ë 164: ñ 191: + 218: + 245: _
9 084: T 111: o 138: è 165: Ñ 192: + 219: _ 246: _
: 085: U 112: p 139: ï 166: ª 193: - 220: _ 247: _
; 086: V 113: q 140: î 167: º 194: - 221: ▌ 248: °
! 060: < 087: W 114: r 141: ì 168: ¿ 195: + 222: _ 249: ·
" 061: = 088: X 115: s 142: Ä 169: _ 196: - 223: _ 250: ·
# 062: > 089: Y 116: t 143: Å 170: ¬ 197: + 224: _ 251: _
$ 063: ? 090: Z 117: u 144: É 171: ½ 198: ▌ 225: ß 252: n
% 064: @ 091: [ 118: v 145: æ 172: ¼ 199: ▌ 226: _ 253: ²
& 065: A 092: \ 119: w 146: Æ 173: ¡ 200: + 227: 254: "
' 066: B 093: ] 120: x 147: ô 174: « 201: + 228: _ 255:
( 067: C 094: ^ 121: y 148: ö 175: » 202: - 229: _
) 068: D 095: _ 122: z 149: ò 176: _ 203: - 230: µ
* 069: E 096: ` 123: { 150: û 177: _ 204: ▌ 231: _
+ 070: F 097: a 124: | 151: ù 178: _ 205: - 232: _
, 071: G 098: b 125: } 152: ÿ 179: ▌ 206: + 233:
- 072: H 099: c 126: ~ 153: Ö 180: ▌ 207: - 234: _
. 073: I 100: d 127: 154: Ü 181: ▌ 208: - 235: _
/ 074: J 101: e 128: Ç 155: ¢ 182: ▌ 209: - 236: _
075: K 102: f 129: ü 156: £ 183: + 210: - 237: _
076: L 103: g 130: é 157: ¥ 184: + 211: + 238: _
077: M 104: h 131: â 158: p 185: ▌ 212: + 239: _
078: N 105: i 132: ä 159: f 186: ▌ 213: + 240: _
079: O 106: j 133: à 160: á 187: + 214: + 241: ±
080: P 107: k 134: å 161: í 188: + 215: + 242: _
Credits
First and foremost, I would like to thank my Higher Power...
I would also like to thank the writers of WWIV, who inspired
the evolution of Telegard, and Cott Lang, who has done a great
job with the TG source in producing Renegade.
I would also like to thank some local Fort Wayneians -
Skipper - "Thanks for getting me through the preliminary
testing! Couldn't have done it with out you!"
Jeff Deweese - For his undying patience and testing. "Ya
got that new computer yet?"
Slammin' - "Thanks..."
Among the list of credits, I have to include the programs that
Imajica feeds off of to become a whole unit -
Commonly supported Archive/Protocol/Virus/Giftest -
DSZ -Includes X, Y, and Z-Modem transfer protocols.
By Omen Technology, INC.
GSZ -Graphical version of DSZ. You must rename GSZ.EXE to
DSZ.EXE.
By Omen Technology, INC.
PUMA -Protocol
By Matthew Thomas
LYNX -Protocol
By Matthew Thomas
ZIP -Archiver
By PKWARE, INC.
ARJ -Archiver
By Robert K Jung
ZOO -Archiver
By Rahul Dhesi
ARC -Archiver
By System Enhancement Associates
LHA -Archiver
By Haruyasa Yoshizaki
GT -GIF File Resolution tester
By Dave Navarro, Jr. (GIF regestered to H&R Block)
SCAN -Virus scanner
By McAfee Associates
Imajica Documentation for Version 3-15 Beta??
Imajica Documentation - Version 3-15 Beta 18