home *** CD-ROM | disk | FTP | other *** search
- DOCUMENT:Q103170 26-AUG-1993 [W_NT]
- TITLE :Extra Drivers Included on Windows NT and NTAS CD-ROM
- PRODUCT :Windows NT
- PROD/VER:3.10
- OPER/SYS:WINDOWS
- KEYWORDS:
-
- ------------------------------------------------------------------
- The information in this article applies to:
-
- - Microsoft Windows NT operating system version 3.1
- - Microsoft Windows NT Advanced Server version 3.1
- ------------------------------------------------------------------
-
- The CD-ROM disk shipped with Windows NT and Windows NT Advanced server
- contains several extra drivers that are not on the floppy disks. These
- drivers can be found in the DRVLIB directory on the CD-ROM disk.
-
- Drivers for the following hardware are included:
-
- Hardware Location Platform
- --------------------------------------------------------------------
- IBM 2.0GB 4mm tape drive \DRVLIB\STORAGE\IBM4MM\X86 Intel x86
- Panasonic CR-52x CD-ROM \DRVLIB\STORAGE\MKECR5XX\X86 Intel x86
- Panasonic CR-56x CD-ROM \DRVLIB\STORAGE\MKECR5XX\X86 Intel x86
- Creative Labs
- Sound Blaster CD-ROM \DRVLIB\STORAGE\MKECR5XX\X86 Intel x86
- Sony CDU 31a CD-ROM \DRVLIB\STORAGE\SONY_31A\X86 Intel x86
- \DRVLIB\STORAGE\SONY_31A\MIPS MIPS
- Trantor T348 Miniscsi Plus \DRVLIB\STORAGE\T348\X86 Intel x86
- Compaq AVGA Video Driver \DRVLIB\VIDEO\CPQ_AVGA\X86 Intel x86
-
- The instructions for installing most of these drivers are included in
- each driver's directory in README.TXT files, with the exception of the
- Compaq AVGA Video driver, which can be installed by the following
- procedure:
-
- 1. Copy all the files in \DRVLIB\VIDEO\CPQ_AVGA\X86 to a blank floppy
- disk.
-
- 2. Run Windows NT Setup from the Main group in Program Manager.
-
- 3. Choose Change System Settings from the Options menu.
-
- 4. In the list of display settings, select Other (requires disk from
- a hardware manufacturer).
-
- 5. When prompted for the disk, insert the disk you made in step 1.
-
- 6. Select the correct display mode for your monitor.
-
- 7. Choose OK twice, exit Windows NT Setup, and restart the system.
-
- Additional reference words: 3.10 Sony CDU31A Creative Labs
- KBCategory:
- KBSubCategory: stp devdrvr
-
- =============================================================================
-
- THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS
- ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
- OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO
- EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
- ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
- CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
- MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION
- OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
- SO THE FOREGOING LIMITATION MAY NOT APPLY.
-
- Copyright Microsoft Corporation 1993.