home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
World of Shareware - Software Farm 2
/
wosw_2.zip
/
wosw_2
/
PRINTING
/
PRTGL124.ZIP
/
ADD.DOC
next >
Wrap
Text File
|
1992-04-26
|
2KB
|
36 lines
This page covers notes for PrintGL 1.24 that are not included in the
v1.22 manual.
/Q sets the number of copies of each printed page (default /Q1).
Page printers produce multiple copies faster using the "N copies"
prefix code (see Useful Prefix and Suffix Codes).
Color dot matrix formats use true black instead of a cyan, magenta,
yellow mix.
PMI includes five alternate settings instead of three.
/DX1,..,/DX4 provide xon/xoff serial port drive.
/DH1,..,/DH4 provide hardware handshaking serial port drive.
The Canon BJ130 driver (/FJ) is faster, but sets the printer to 10
pitch text.
/FR drives the Tektronix ColorQuick.
You can specify the nominal resolution of PostScript output with a
prefix code that includes the dots/inch followed by ' XX'. For
example /J 54 48 48 32 88 88 sets 600 dpi. The actual resolution
should be set to match, for example /FS 600,600. You can specify the
number of copies similarly with the XC macro, for example /J 50 32
88 67 makes 2 (ASCII 050) copies.
Reverse image is supported on laser printers.
Shading patterns are revised (but have the same coverage).
PrintGL supports forty pens. PMI supports fifteen pens.