home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.unix.sys5.r4
- Path: sparky!uunet!sci34hub!gary
- From: gary@sci34hub.sci.com (Gary Heston)
- Subject: Re: Which driver for bell tech. HUB-6 on esix sys V R4.03?
- Message-ID: <1992Nov9.210039.3631@sci34hub.sci.com>
- Reply-To: gary@sci34hub.sci.com (Gary Heston)
- Organization: SCI Systems, Inc., Huntsville, Al.
- References: <=bm159#@rpi.edu>
- Distribution: na
- Date: Mon, 9 Nov 1992 21:00:39 GMT
- Lines: 25
-
- In article <=bm159#@rpi.edu> multics@clotho.acm.rpi.edu (Multics) writes:
- >subject pretty much says it all. I tried calling hte phone numbers in the
- >documentation and its been disconnected. Anyone have a working phone
- >number for this company?
-
- Bell Technilogies was a wholly-owned subsidiary of Intel, which has since
- folded it into their Unix group, which then discontinued most of the
- products, and was sold to Interactive, which discontinued the Intel SysVr4
- product, and was sold to SunSoft.....
-
- >There are drivers for SCO system V Xenix 2.2, SCO Xenix/386, and
- >386/ix. Will any of htese work on Esix Sys V R 4.03?
-
- The 386/ix is probably your best bet, but it probably won't work. If
- someone out there has a copy of Intel SysVr4, it might have usable
- drivers.
-
- We have a dozen or so of the cards around (we used to resell them).
-
-
- --
- Gary Heston SCI Systems, Inc. gary@sci34hub.sci.com site admin
- The Chairman of the Board and the CFO speak for SCI. I'm neither.
- "...I looked out my window, and saw Kyle Pettys' car upside down, then I
- thought 'One of us is in real trouble'." Davey Allison, re: a 150MPH crash
-