home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #26 / NN_1992_26.iso / spool / comp / sys / tandy / 1752 < prev    next >
Encoding:
Internet Message Format  |  1992-11-09  |  1.6 KB

  1. Path: sparky!uunet!nwnexus!ole!ssc!eskimo!lorc!lowen
  2. From: lowen@lorc.UUCP (Lamar Owen)
  3. Newsgroups: comp.sys.tandy
  4. Subject: Re: TRS-80 Mod 4 hard disk malfunction - need replcement
  5. Message-ID: <Ls2PTB1w164w@lorc.UUCP>
  6. Date: Wed, 04 Nov 92 10:49:08 EST
  7. References: <scott_silverstein-021192105758@lasagne.med.yale.edu>
  8. Organization: LORC Enterprises
  9. Lines: 26
  10.  
  11. scott_silverstein@yccatsmtp.ycc.yale.edu (Scot Silverstein MD) writes:
  12.  
  13. > I have a 5-meg RS hard disk unit I use with a Model 4. Recently CP/M
  14. > wouldn't boot anymore.  I have obtained the Mod 4 diagnostics and
  15. > the hard disk utility tells me cylinder 0 has become unreliable. 
  16. > Even after reformatiing, there are read errors, especially after the
  17. > unit has become warm after an hour or so.
  18. > I'd really like to preserve this relic.  Does anyone have replacement
  19. > 5 meg bare hard drives?  Or 10 meg half-heights that can be put in?
  20. > I have the tech manual, so I'm OK in that department.
  21.  
  22. I have several low-capacity drives.  I believe I have two 10 MB's, a 15MB (
  23. these three are full-height) and a half-high 10MB.  The full height 10's
  24. will be $55, the full height 15 will be $85, and the half height 10 will
  25. be $90 (my cost on this one).
  26.  
  27. > Thanks to any and all who reply.
  28.  
  29. --
  30.  
  31. Lamar Owen, Systems Consultant, GE Lighting Systems, Hendersonville, NC
  32. ***********************************************************************
  33.  Opinions expressed herein are the author's and do not reflect policy
  34.    or opinions of the General Electric Company or its subsidiaries.
  35. ***********************************************************************
  36.