home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.sun.misc
- Path: sparky!uunet!caen!malgudi.oar.net!chemabs!lwv26
- From: lwv26@cas.org (Larry W. Virden)
- Subject: Re: compiling X sources
- Message-ID: <1992Nov10.162455.14843@cas.org>
- Followup-To: comp.sys.sun.misc
- Sender: usenet@cas.org
- Reply-To: lvirden@cas.org (Larry W. Virden)
- Organization: Nedriv Software and Shoe Shiners, Uninc.
- References: <1chk2sINNlgl@usenet.INS.CWRU.Edu> <1992Nov8.223315.14353@infodev.cam.ac.uk>
- Date: Tue, 10 Nov 1992 16:23:28 GMT
- Lines: 26
-
- In article <1992Nov8.223315.14353@infodev.cam.ac.uk> tda10@cus.cam.ac.uk (Tim) writes:
- :In article <1chk2sINNlgl@usenet.INS.CWRU.Edu>, at018@cleveland.Freenet.Edu (Dale Houston) writes:
- :|>
- :|> Is there an FAQ list somehwere that will tell me how to compile and
- :|> imake under OpenWindows when you're. Most PD X software expects the X
-
- :A reasonably complete X11 installation ought to make PD software building and
- :installation, on your own workstation, as easy as:
- :
- :Read the README
- :Check the Imakefile
- :xmkmf (possibly -a if the package is complex)
- :make
- :make install
- :make install.man
- :
- :Tim.
-
- Under OW 3.0, one has to take the first step of fixing xmkmf and the
- imake templates that are distributed with SunOS 4.1.[12] before building
- a package. Anyone know if 4.1.3's OW 3.0 is any different (I suspect
- not...)
- --
- Larry W. Virden UUCP: osu-cis!chemabs!lvirden
- Same Mbox: BITNET: lvirden@cas INET: lvirden@cas.org
- Personal: 674 Falls Place, Reynoldsburg, OH 43068-1614
-