home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #26 / NN_1992_26.iso / spool / comp / sys / ibm / pc / hardware / 29229 < prev    next >
Encoding:
Internet Message Format  |  1992-11-09  |  2.7 KB

  1. Path: sparky!uunet!elroy.jpl.nasa.gov!sdd.hp.com!saimiri.primate.wisc.edu!caen!mtu.edu!abcd.Houghton.MI.US!Jim_Johnson
  2. From: Jim_Johnson@abcd.Houghton.MI.US (Jim Johnson)
  3. Newsgroups: comp.sys.ibm.pc.hardware
  4. Subject: Re: Multiple modems ... 
  5. Distribution: world
  6. Message-ID: <Jim_Johnson.0arr@abcd.Houghton.MI.US>
  7. Date: 8 Nov 92 20:14:26 EST
  8. Organization: Amiga BitSwap Central Dispatch
  9. Lines: 60
  10.  
  11. In a message dated Sat  7 Nov 92 21:05, Jorgense@plains.nodak.edu (lee A. J
  12. wrote:
  13.  
  14.  JAJ> Ok ... I have a Wyse 50 terminal hooked up to my phone line, and a
  15.  JAJ> 286 with
  16.  JAJ> an internal modem hooked up to the same line.  Both modems are 2400
  17.  JAJ> baud.
  18.  JAJ> I have them chained right now (my wyse is hooked to the wall and my
  19.  JAJ> pc is hooked
  20.  JAJ> to the other jack on the wyse's modem and a normal phone hooked up
  21.  JAJ> to the
  22.  JAJ> 2nd jack of the pc's modem). 
  23.  
  24.  JAJ> like:
  25.  
  26.  JAJ> W
  27.  JAJ> a <----------WYSE <----------PC <----------Phone
  28.  JAJ> l            MODEM         MODEM
  29.  JAJ> l
  30.  
  31.  JAJ> (poor ascii art:)
  32.  
  33.  JAJ> Anyway, is there anyway I can use the Wyse to 'look' at the data if
  34.  JAJ> I
  35.  JAJ> connect with the PC to the mainframe, or can I use the PC's modem to
  36.  JAJ> 'look'
  37.  JAJ> at the data If I use my Wyse?
  38.  
  39.  JAJ> (in other words ... can I use two modems on the same line, on
  40.  JAJ> different
  41.  JAJ> machines, at the same time?)
  42.  
  43. Most communications are full duplex.  One modem is the "originating" modem
  44. (usually yours), and the other modem is the "answering" modem (the
  45. mainframe). The originating modem modulates one frequency to send, and
  46. demodulates another frequency to receive.  The answering modem uses the
  47. same frequencies, but reverses which one is used to send and which one is
  48. used to receive.
  49.  
  50. After making a connection to the mainframe with your "primary" modem, you
  51. could try typing "ATO" with your "secondary" modem (assuming your modems
  52. are Hayes command compatible).  So long as the communications are full
  53. duplex and the mainframe echos back everything you type, you should see
  54. both sides of the communication after being sent by the mainframe.
  55.  
  56. Be careful to transmit *nothing* with the "secondary" modem.  The mainframe
  57. will think it came from your "primary" modem, and your "primary" modem will
  58. think it came from the mainframe.  Make sure your modem and comm program is
  59. set to not respond to an ENQuiry request.
  60.  
  61. If the link is only half duplex, you will only be able to see one side of
  62. the communication.  "ATO" will get you the mainframe side, and "ATA" will
  63. get you the "primary" modem's side.
  64.  
  65. -- Via DLG Pro v0.995
  66.  
  67. jim_johnson@abcd.houghton.mi.us
  68. from Calumet, Michigan, USA -the world's former copper mining capital, 
  69. located on Lake Superior and home to America's newest National Park,
  70. ** The Keweenaw National Historic Park **
  71.