home *** CD-ROM | disk | FTP | other *** search
- From: kk@hpl-opus.hpl.hp.com (Konstantinos Konstantinides)
- Date: Sat, 14 Nov 1992 02:03:52 GMT
- Subject: Re: Gnu c++ and groff on HP800
- Message-ID: <63300104@hpl-opus.hpl.hp.com>
- Organization: HP Labs, High Speed Electronics Dept., Palo Alto, CA
- Path: sparky!uunet!charon.amdahl.com!pacbell.com!ames!saimiri.primate.wisc.edu!zaphod.mps.ohio-state.edu!sdd.hp.com!apollo.hp.com!cupnews0.cup.hp.com!scd.hp.com!hpscdm!hplextra!hpl-opus!kk
- Newsgroups: comp.sys.hp
- References: <1992Nov13.132715.10164@rsv.svskt.se>
- Lines: 31
-
- In comp.sys.hp, tomas@u30005.rsv.svskt.se (Tomas Ruden) writes:
-
- >
- > I have installed gnu c++ 2.2.2 together with libg++ 2.2 on my site. When
- > using it to compile groff 1.05 i get an errors from my assembler that says
- >
- > as: common.s @line#1246 [err#1060]
- > Argument 1 or 3 in FARG upper
- > - lookahead = ARGW4=FR,RTNVAL=GR
- >
- > The assembler gives this message for five lines. All offending looks allmost
- > the same:
- >
- > .EXPORT rounded_box__13common_outputRC8positionT1dRC9line_typed,
- > PRIV_LEV=3,ARGW0=GR,ARGW1=GR,ARGW2=GR,ARGW3=FU,ARGW4=FR,RTNVAL=GR
- >
- > (line-break inserted by me).
- >
- > Has anyone succeeded with getting a good gnu c++ and a working groff. I'm
- > very grateful for any helpful hints on how to proceed. I'm using HP-UX 8.0.
- > --
- > Tomas Ruden, tomas@rsv.svskt.se ! "Saliga {ro de korkade, ty de skola
- > Opinions expressed above are my own ! icke skjunka sσ djupt" - A. Caringer
- > and are not necessarily shared by !
- > the Swedish Tax Administration ! For a nice date: call strftime(3C)
-
- groff binaries for s300/400 or s700 are available from the iworks
- machine using anon. ftp . Check postings from iworks for the
- complete ftp address.
-
- Konstantin
-