home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!cis.ohio-state.edu!pacific.mps.ohio-state.edu!ohstpy!miavx1!apsvax.aps.muohio.edu!mgjones
- Newsgroups: comp.os.os2.misc
- Subject: How to fix PRODUCT.EXE problem n 12th disk!!!
- Message-ID: <1992Nov9.203159.14130@miavx1.acs.muohio.edu>
- From: mgjones@apsvax.aps.muohio.edu (Mike Jones)
- Date: 9 Nov 92 20:31:34 -0500
- References: <1992Nov6.214153.1607@jhunix.hcf.jhu.edu>
- Nntp-Posting-Host: apsvax.aps.muohio.edu
- X-Newsreader: TIN [version 1.1 PL6]
- Lines: 27
-
- Tim DiLauro (timmo@jhunix.hcf.jhu.edu) wrote:
- : In article <1992Nov6.183742.22769@kum.kaist.ac.kr> jhlee@rose.handy.co.kr (Lee Joo Hee) writes:
- : >asks for 12th disk I put it into my disk driver. Install program reads
- : >well but it generates an error related with "A:FIX\OS2\PRODUCT.EXE" and
- : >it displays only log message. When I reboot my computer, OS/2 doesn't seem
- : >to work correctly.
- : > Is there any solution?
- :
- : above. The solution was to reinstall the GA without the secondary display,
- : install any other non-video drivers, and then install the ServicePak.
-
- Save yourself from reinstalling! Just edit your CONFIG.SYS on your hard
- drive, look near the bottom where you can see the video drivers, and remove
- the references to your second adapter (usually pretty easy to see, for
- example, I had a Monochrome/Printer Adapter as a second display, so the
- drivers ended in MPA (before the extension, like xxxxMPA.SYS or whatever).
- There was 2 references to my secondary display in my config.sys.
-
- Then run the CSD install, and it should finish with no problem. If that
- fails, THEN reinstall GA and try it.
-
- ---
- Mike "Felix" Jones
- mgjones@apsvax.aps.muohio.edu
-
- "There are three kinds of lies: Lies, damned lies,
- and benchmarks." - adapted from Benjamin Disraeli
-