home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.dcom.sys.cisco
- Path: sparky!uunet!boulder!recnews
- From: David Hampton <hampton@cisco.com>
- Subject: Re: Problems with vines on 8.3(5)
- In-Reply-To: Your message of "Thu, 12 Nov 92 16:34:48 EST."
- <9211122134.AA21511@deepthought.princeton.edu>
- Message-ID: <721613052.5424@news.Colorado.EDU>
- Sender: news
- Date: 12 Nov 92 13:55:42 PST
- Approved: news
- X-Note1: mail msgid was <9211122155.AA05602@wolf.cisco.com>
- X-Note2: message-id generated by recnews
- Lines: 14
-
- To a vines server, the cisco router appears as another vines server.
- Because of this, you must purchase the "Server to Server LAN" option
- for your servers.
-
- > We are trying to get a Vines server to stay up after we enable vines routing
- > on the interface for the subnet to which the server is connected. The symptoms
- > are that the server logs an error about "SS LAN option not available," and then
- > says that it will shutdown services in 10 minutes. If we remove and reconnect
- > the ethernet cable on the server, it will then come back up, and repeat the
- > cycle. This, obviously, does not allow much useful work to get done. It does
- > not matter if I enable vines on just this interface, or on both interfaces in
- > the router. Here is the associated configuration information:
-
- David
-