home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.sgi
- Path: sparky!uunet!stanford.edu!microunity!jsw
- From: jsw@microunity.com (Jeff Weinstein)
- Subject: Re: PI video boards and X performance
- Message-ID: <1992Sep7.020221.14835@microunity.com>
- Sender: usenet@microunity.com (news)
- Nntp-Posting-Host: rgb.microunity.com
- Organization: MicroUnity Systems Engineering, Inc.
- References: <laic2eINNb8b@bovina.cs.utexas.edu>
- Date: Mon, 7 Sep 1992 02:02:21 GMT
- Lines: 16
-
- In article <laic2eINNb8b@bovina.cs.utexas.edu>, ted@cs.utexas.edu (Ted Woodward) writes:
- > Our project is in X only. No GL. It uses XDrawLine and various XFill
- > routines. Will choosing a TG or XS24 over the G make any performance
- > difference in this case? If so, how much for each?
-
- You will definitely get the best performance from XS24. TG will give
- the same X performance as G, since X specific microcode doesn't use
- the turbo option.
-
- --Jeff
-
- --
- Jeff Weinstein - X Protocol Police
- MicroUnity Systems Engineering, Inc.
- jsw@microunity.com
- Any opinions expressed above are mine.
-