home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!dziuxsolim.rutgers.edu!gandalf.rutgers.edu!rgonzal
- From: rgonzal@gandalf.rutgers.edu (Ralph Gonzalez)
- Newsgroups: comp.sys.mac.hardware
- Subject: Re: Rebuilding Mac Plus power supply
- Message-ID: <Sep.12.10.00.12.1992.3392@gandalf.rutgers.edu>
- Date: 12 Sep 92 14:00:12 GMT
- References: <BuD940.9B3@acsu.buffalo.edu> <7295@lib.tmc.edu>
- Organization: Rutgers Univ., New Brunswick, N.J.
- Lines: 23
-
- drg@biomath.mda.uth.tmc.edu (David Gutierrez) writes:
-
- >> My mac plus is on the fritz as far as the power supply goes. It is
- >>still the original power supply from a 128K mac and I just had the mother
- >>board upgraded. I was wondering about any info I can get about who sells
- >>power supply boards and for how much. Or if I could send my board in to
- >>get rebuilt itself or do it your self kits.
-
- >Soft Solutions (I don't have their phone number handy - check the back pages of
- >MacWeek, etc.) will rebuild your power supply to higher specifications than the
- >original board for $65.
-
- That's probably the best approach. Also, Soft Solutions sells kits so
- you can do this yourself. Also, I saw an ad a while ago for power supply
- trade-ins for $49, though I don't think you'll get the higher spec.
- power supply mentioned above. The $49 deal was from: Pre-Owned Electronics,
- 1-800-274-5343.
-
- -Ralph
- --
- Ralph Gonzalez, Computer Science, Rutgers Univ., Camden, NJ
- Phone: (609) 757-6122; Internet: rgonzal@elbereth.rutgers.edu
- --
-