home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.pc.hardware
- Path: sparky!uunet!haven.umd.edu!darwin.sura.net!nntp.msstate.edu!news
- From: mrr1@Ra.MsState.Edu (mark r rauschkolb)
- Subject: 2 IDE drives don't want to work together
- Message-ID: <1992Sep14.133521.4021@ra.msstate.edu>
- Sender: news@ra.msstate.edu
- Nntp-Posting-Host: isis.msstate.edu
- Reply-To: mrr1@Ra.MsState.Edu
- Organization: Mississippi State University
- Date: Mon, 14 Sep 1992 13:35:21 GMT
- Lines: 14
-
- I have 2 IDE drives that I know the jumper settings for. They
- are set correctly. I'm not sure which drive HAS to be in which position
- on the cable, but I've tried them in both places and the machine won't
- boot with both of them connected.
- (they both work separately, but not together)
-
- One is a ST-3096A, the other is a miniscribe 8051A.
-
- Any suggestions?
-
- Mark
- mrr1@ra.msstate.edu
-
-
-